Filter Results By:

Products

Applications

Manufacturers

Showing recent results 7396 - 7410 of 10000 products found.

  • Data Logger & Monitor

    DLM-09 - Manatronics Pty Ltd

    The Data Logger/Monitor has been designed to operate on 12V, 24V, 48V and 110V battery systems, with optional inputs for higher input Voltages, up to 550V. The Data Logger/Monitor is completely powered from the Batteries, and therefore a mains supply is not required. Therefore tests are not terminated part way through by a temporary mains power outage. The unit is lightweight and is completely portable. The Data Logger/Monitor may be left on site, unattended, for extended periods of time for data collection. Or used permanently as a Monitor / Alarm system.

  • DC Sources

    Electronic Test & Power Systems

    Adjustable constant voltage and constant current sources are provided across the entire DC source range. Additionally constant power operation is standard on the high power DC supplies and optional on the medium power models. Modular high current DC power supply systems providing up to 2kV at 2MW can be assembled.A variety of interfaces are available. Analogue, RS232, CAN, RS485, Ethernet or IEEE 488.2 can be specified for most units. LabVIEW drivers are also offered to aid system integration.

  • Development Environment For RL78 Family

    Renesas Electronics Corp.

    We offer a complete line of high quality software, high spec easy-to-use development tools, and various boards and kits for development environment for RL78 Family. This fully designed development environment helps you develop your system more effectively and efficiently; reduces your development time and cost yet improves the quality of system. Furthermore, we offer our partner products and they will also enable you to have development environment best fit to your needs.

  • Development Environment For RX Family

    Renesas Electronics Corp.

    We offer a complete line of high quality software, high spec easy-to-use development tools, and various boards and kits for development environment for RX Family. This fully designed development environment helps you develop your system more effectively and efficiently; reduces your development time and cost yet improves the quality of system. Furthermore, we offer our partner products and they will also enable you to have development environment best fit to your needs.

  • Digital Gauge Pressure

    ZET 7012-I VER.2 - ZETLAB Company

    Digital gauge pressure ZET 7012-I VER.2 is used in automated control systems and technological processes control systems in various industrial spheres:*oil and gas industry;*metallurgical industry;*energy industry;*construction engineering sector;*construction industry;*food manufacturing industry;*communal services and water supply industry;*automobile transport and shipping facilities.The digital gauge pressure is used for fast measuring of pressure and transfer of the data obtained in digital format via RS-485 or 4-20 mA interface .

  • Electret Measurement Microphone

    EMM-6 - Dayton Audio

    The EMM-6 is a precision electret condenser microphone designed for measurement and critical recording applications. The extremely flat frequency response and true omni-directional polar pattern make it perfect for use with room acoustic analyzers and audio measurement systems. The EMM-6 microphone is individually hand calibrated using a laboratory standard Brüel & Kjær microphone in conjunction with a DAAS computer measuring system. Each microphone includes stand mount, foam windscreen, transport case, and its own unique calibration response graph.

  • Electromechanical Transfer Switches up to 40 GHz

    Fairview Microwave Inc.

    Fairview Microwave’s line of electromechanical relay transfer switches can be utilized for numerous applications to increase system level capabilities and can help simplify the overall design approach. With two input and two output ports, transfer switches can connect two different instruments with two devices under test. Additionally, they can be used as drop-out switches, for signal reversal or to bypass a component under test. These products are typically used in military communications and broadcast systems, SATCOM, test & measurement, instrumentation applications and are suitable for aircraft use.

  • EM Cube

    EMAG Technologies Inc..

    EM.Cube® is an industry-recognized simulation suite for electromagnetic modeling of RF system engineering problems. It features several distinct simulation engines that can solve a wide range of modeling problems such as electromagnetic radiation, scattering, wave propagation in various media, coupling, interference, signal integrity, field interactions with biological systems, etc. Using EM.Cube, you can solve problems of different sizes and length scales, varying from a few microns in MEMS devices to several miles in large urban propagation scenes.

  • EMI/EMC Testing

    Martin Testing Laboratories

    EMI tests and EMC tests, as well as comprehensive design support of circuit cards, modules, equipment, subsystems, systems, and facilities are available though our partnership with Northrop Grumman. Tests are done in the laboratory or in the field. Our test facility in Sacramento (McClellan), California is conveniently located near the Silicon Valley. Electromagnetic surveys of a system or an entire facility can also be done at customer facilities. Name virtually any requirement for electromagnetic interference and electromagnetic compatibility and we can meet it - with reliable results.

  • End-of-Line IC & MEMS Tester

    igentic® 841t - Sterner Automation Limited

    Integrated circuit (IC) and micro electro-mechanical system (MEMS) device manufacturers need to address the challenges of today's global market including increased functionality, speed and complexity while delivering components at reduced costs. Sterner Automation's igentic® 841t automated test systems meet these demanding requirements by providing a flexible platform for comprehensive end-of-line IC and MEMS device handling, testing, grading and packaging. The resulting improvements in quality assurance and process efficiency will maximize customer satisfaction and profitability.

  • Entry Level Beam Profiling

    BeamMic® - Ophir Photonics

    BeamMic is simplified set of measurement tools for the entry level beam analysis user. The camera-based beam profiling system consists of a camera and analysis software. Often times, this system will need to be used with beam attenuation or beam sizing accessories, depending on your laser application. BeamMic includes a complete set of high-accuracy measurements, and features a rich graphical interface. For the laser technician, this entry-level software will easily help you quickly become familiar with the many benefits of beam profiling.

  • Entry-Level Force Measurement

    The L. S. Starrett Company

    New Starrett L1 Innovative, Entry-Level Force Measurement SystemsStarrett L1 Force Measurement Systems comprise our innovative, entry-level computer-based force testing solution. Optimized for production and quality control testing, they are easy to setup, operate and maintain. L1 Systems can be used to perform a wide variety of testing methods including Load Limit Testing, Distance Limit Testing, Break Limit Testing, Cyclic Count Testing, Cyclic Duration Testing, Constant Load Testing and Constant Distance Testing.

  • Fast 6-Axis Hexapod

    H-900KSCO - Physik Instrumente GmbH & Co. KG

    Reference-class 6-axis positioning system. Parallel-kinematic design for six degrees of freedom making it significantly more compact and stiff than serial-kinematic systems, higher dynamic range, no moved cables: Higher reliability, reduced friction. Powerful digital controller, open software architecture. Optional: Software for avoiding collisions in restricted workspace. Fields of application. Motion simulation: Motion profile compatible according to ISO 20672, ISO 8728, and ISO 16328. Industrial production, tool machines, automotive industry, shipping.

  • Flash Vs. Scan

    ams AG

    A LiDAR system can observe the complete field of view (FOV) at once, called Flash systems. Flash typically works well for short to mid-range (0-100m), and by capturing the complete scene at once also objects with high relative speeds can be detected properly. Another implementation is to focus on a subset of the FOV, consequentially look at the next subsets, until the complete FOV is covered, called Scanning. Scanning can focus the light on the subset instead of the full FOV, and therefore can do object detection at a longer range compared to Flash.

  • Flightline Air Data Test Set

    ADTS-3150 Series - TestVonics, Inc.

    TestVonics ADTS-3150 Series is a portable, high precision, dual channel air data pitot static test system. This tester is designed to calibrate, test and troubleshoot air data instrumentation and aircraft pitot-static systems. The test set has been designed with functional and reliability features highly suited to withstand the harsh environmental and demanding conditions of the commercial flightline environment. The test set is designed for testing a wide range of commercial and some military aircraft. The ADTS-3150 accuracy complies with standards for RVSM.

Get Help