Filter Results By:

Products

Applications

Manufacturers

Showing recent results 5326 - 5340 of 10000 products found.

  • Power Supplies

    RM-1000B - CoolMax Technology Inc.

    With dual PCI-E connectors, the RM Series carries all its essentials to power your system. Enjoy the graphic rendered programs and games without the threat of overheating. Its dark aluminum chassis not only looks good, but dramatically relieves heat built-up. The 120mm cooling fan enhances the already efficient heat dissipation rate and helps balance the cooling system with noise level. The RM Series is great for high end users to everyday casual users. Whatever your system needs, the RM Series can deliver.

  • Power Supplies

    RM - SERIES - CoolMax Technology Inc.

    With dual PCI-E connectors, the RM Series carries all its essentials to power your system. Enjoy the graphic rendered programs and games without the threat of overheating. Its dark aluminum chassis not only looks good, but dramatically relieves heat built-up. The 120mm cooling fan enhances the already efficient heat dissipation rate and helps balance the cooling system with noise level. The RM Series is great for high end users to everyday casual users. Whatever your system needs, the RM Series can deliver.

  • PXI Programmable Power Supply

    NI

    PXI Programmable Power Supply modules feature multiplechannels that you can combine for higher voltage or current capabilities. Some modules include isolatedchannels and an output disconnect functionality that allows isolation from the device under test(DUT) when not in use and remote sense to correct for losses in system wiring. You can use these models to simplify the task of designing automated test systems for a wide range of applicationsfrom aerospace and defense to automotive and component testby eliminating the need to mix multiple instrumentation form factors in a given test system.

  • QTOUCH2204C

    Qmax Test Technologies Pvt. Ltd.

    The Prober Test System is capable of movement in XYZ directions with fixed angle (θ) and dual probe heads (further expandable up to 4 ) . The system has in-built Vision Camera for easy monitoring of probe needle contact.The prober supports automatic fiduciary recognition. The system has built –in linear encoders to achieve higher precision. It also comes with in-built image processing unit with minimum 5 Mega pixel Camera ,tele-centric lens with image processing software, illuminated with LED bar light with controls.

  • Remote Intelligent Pod

    ScanTAP - Corelis

    The test patterns generated by the PCI-1149.1/Turbo controller are distributed to the target system either directly through ScanTAP 4 and ScanTAP-8 pods. The ScanTAP-4 and ScanTAP-8 pods can apply test vectors and/or ISP patterns to target boards with a variety of JTAG chain topologies. In the simplest case, the ScanTAP-4 and ScanTAP-8 will provide the interface between the PCI-1149.1/Turbo controller and a target system consisting of a single JTAG Test Access Port (TAP). This would be the case where the target system consists of one JTAG chain and its single associated TAP.

  • Solid Measuring Viewer

    Machvision

    SMV system is designed to perform automatic final inspecting system. SMV integrates professional vision and optics technology. Besides, reliable mechanical system reduces the maintenance time. It is especially suitable for the demand for high quality and low cost inspection. Unique inspection techniques adapt to all 3D measuring. It can detect laser Via, dimple, bump, copper plating thickness, line, SMT, BGA, etc. SMV provides 3D image and 3D measuring result. SMV adopts programmable LED lighting to obtain the best image.

  • Testing Released Water Vapor

    Humiditest™ Complete System - James Instruments Inc.

    The James Instruments Humitest System allows the concrete practitioner to monitor and ensure that a new structure is dry enough to proceed with the next phase of construction. This is especially critical for concrete structures requiring a coating, carpeting or similar floor or covering treatment. Installing such treatments before the concrete is sufficiently dry will typically cause expensive failures in the covering treatment. The only accurate way to ensure that the concrete is sufficiently dry enough to safely avoid expensive re-work is via a bore hole humidity test system, such as the Humitest System

  • VPX 3U Universal RTM

    1940000377-0000R - ELMA Electronic, Inc.

    The Universal 3U VPX RTM Breakout Board can allow a test engineer to access I/O signals on custom built VPX boards. The breakout board is designed for the utility, power, single ended or low speed differential signals during setup and testing of a new system. During system integration, it often is desirable to access certain utility signals such as VS1, VS2 or VS3, auxiliary voltages other signals such as Geographic address or the system management bus which are all available from the rear side of the backplane.

  • VPX 6U Universal RTM

    1940000352-0000R - ELMA Electronic, Inc.

    The Universal 6U VPX RTM Breakout Board can allow a test engineer to access I/O signals on custom built VPX boards. The breakout board is designed for the utility, power, single ended or low speed differential signals during setup and testing of a new system. During system integration, it often is desirable to access certain utility signals such as VS1, VS2 or VS3, auxiliary voltages other signals such as Geographic address or the system management bus which are all available from the rear side of the backplane.

  • Pressure And Temperature Scanners

    TE Connectivity Ltd.

    The test and measurement group of TE Connectivity (TE) provides data systems based on the electronic pressure and temperature scanners of legacy brand Pressure Systems (PSI). Available in standard designs and custom configurations, our electronic scanners, pressure scanners and temperature scanners can meet the needs of a wide range of industries.

  • 3U OpenVPX Sensor Interface Unit - SIU36

    SIU36 - North Atlantic Industries

    The SIU36 is a highly configurable rugged system or subsystem ideally suited to support a multitude of Mil-Aero applications that require high-density I/O, communications, Ethernet switching and processing. The SIU36 leverages NAI’s 3U boards to deliver off-the-shelf solutions that accelerate deployment of SWaP-optimized systems in air, land and sea applications.

  • 3U PCIe Gen2 ATR Style Chassis

    Crosswind 600 - PCI EmbeddedComputer Systems

    PCI-Systems innovative 1-2-3 system. 1: Lab unit 2: Configure unit 3: Deploy unit! All our chassis and prototype systems can be deployed without needing to change out the chassis. Add Front and rear custom covers and full sealing and you are ready to go to qualification!

  • 8-Slot 32-bit 6U CompactPCI Backplane

    cBP-6108F - ADLINK Technology Inc.

    *PICMG:2.0 R3.0, 2.1 R2.0, 2.5 R1.0, 2.9 R1.0Note*Dimension:202.5 x 262.05 (mm, WxH, vertical insertion view)*Segment:One*cPCI Bus:32-bit/33MHz*System Slot:Right-hand side; System Slot Rear I/O:P3, P4 and P5 rear I/O with AB-type shroud

  • Alaska Test Range Support

    Scientific Research Corp. STI Division

    SRC supports the Joint Pacific Alaska Range Complex by upgrading and sustaining test range assets and by operating these assets during test and training events such as Red Flag. Our team supports unique system technologies, combat training, and weapons systems evaluation, all while operating in austere locations.

  • ATEX Gas Analyzer

    atmosFIR EX - Protea Ltd

    atmosFIR EX is an ATEX certified gas analyser system for measurement of industrial gases in a Zone 1 or Zone 2 area, providing a complete EX certified gas measurement system that meets both the sampling of non-flammable and flammable gases, utilizing Protea’s multigas atmosFIR FTIR gas analyser platform.

Get Help