Showing product results. 2851 - 2865 of 3227 products found.
-
NI-9236 / 785996-01 - NI
10 kS/s/channel, 350 Ω Quarter-Bridge Strain Gage, 8-Channel C Series Strain/Bridge Input Module - The NI‑9236 measures dynamic strain on all channels simultaneously, allowing for synchronized, high-speed measurements. This capability is important for applications, such as impact … tests, that require comparison across many channels at a particular instant in time. The NI‑9236 includes built-in voltage excitation for quarter-bridge sensors. It also has 60 VDC isolation and 1,000 V rms transient isolation, providing high‑common‑mode noise rejection and increased safety.
-
4026 - SPECTEC Innovative Sensor Solutions
Model 4026 Freq to Voltage or Freq to Current Converter accepts frequency input from any magnetic speed sensor, digital magnetic pickup or Hall effect zero speed sensors. Input and output configurations are field selectable. Input range is adjustable between 1100 Hz - 10 kHz or 75Hz to 1100 Hz. Output selection can be configured as 4-20mA converter, 10-50mA converter, 0-5 V FTV converter or 0-10 V FTV converter. ZERO and SPAN adjustments easily calibrate to almost any measurement range, with little interaction between the adjustments.
-
Surf-2 - Rtec Instruments
Rtec Adhesion Tester is a turn key solution to measure Pull up Adhesion force, Work of Adhesion and Shear Adhesion of materials. Equipped with Ultra-Sensitive Capacitance Load Cells this tester provides µN level resolution with forces up to 5N. The High-Resolution sensors allow characterization of large samples over macroscopic length scales to study the effect of texture and other surface modifications. Integrated with High Resolution Inverted Camera, it allows the researchers to measure Contact Area vs. Force making it extremely useful in measuring Adhesion of Soft Materials, Biomimetics and Hydrogels.
-
Infinite Industrial Informatics Lt
Autonomous RTUs are power network independent devices, opening up new horizons for telemetry in off-grid areas. An autonomous RTU features in measuring capabilities and contains a wireless MODEM for data and alarm transmission. It can also provide all necessary circuits for powering measuring transducers and sensors. The device is commonly powered by an internal battery and is housed in a IP66 to IP68 enclosure for outdoor use. The battery lifetime requirements extend from few months to 15 years. Another common requirement is continuous, maintenance free operation in harsh environmental conditions and extended temperature ranges.
-
microBlox - Acromag, Inc.
Acromag's microBlox uB Series I/O modules offer a compact, high-performance solution for interfacing sensors and field devices with data acquisition systems. uB signal conditioning modules are ideal to isolate, filter, convert and amplify a wide variety of signal types for test, measurement and control systems. Just plug uB modules into 4, 8, or 16-channel backpanels in any mix for a high-density analog I/O interface. Channel-to-channel isolation provides optimal noise and surge protection from ground loops, spikes, and high common mode voltages.
-
e-con Systems Inc.
e-CAM & See3CAM Series of Camera Boards. e-CAM camera board is e-con's reference design featuring a board camera interfaced to a processor on its high speed CMOS interface. Board cameras are available for Jetson Developer kits and NXP i.MX6 boards. For processors, that don't have the Camera ISP pipeline, e-con Systems provides the complete software stack for raw image sensors. The software stack has a wide variety of features ranging from color correction, gamma correction, dead pixel correction, color space conversion, sharpen filter etc.
-
M1-25M/XXE - Elmika
The M1-25M/XXE series instruments are high precision broadband Calorimetric Sensors operating in millimeter and sub-millimeter wave range on a principle of substitution of microwave power by direct current power, using an autocompensating transistor transducer. Calorimetric Sensor is supplied with Calorimetric Power Meter M1-25M (measurement and indicator block), which provides PC connection via USB interface.Calorimetric Power Meter with Calorimetric Sensor provides accurate absolute power measurements in single mode and multimode waveguides (Metal Dielectric Waveguide) which could be a priority for terahertz physics and technology.
-
ICH - Memmert GmbH + Co.KG
Its excellent temperature and humidity homogeneity positions the climate chamber ICH in the international top league of stability test chambers. Thermal transfer to the interior whether heat or cold is guaranteed through a large-area air jacket on four sides. Thanks to its hermetically sealed interior, the climate chamber ICH does not consume any water once the setpoints have been reached, provided that the door is not opened. Two high-grade platinum temperature sensors with mutual monitoring guarantee interruption-free long-term operation even if one sensor should fail.
-
NI CompactDAQ - NI
This NI CompactDAQ configurable data-logging system includes an NI CompactDAQ controller or chassis, C Series I/O modules, and Chameleon software. It is designed for structural test and monitoring applications with the NI CompactDAQ controller, which includes built-in processing and nonvolatile storage for running Chameleon software and logging data locally. Alternatively, you can choose a USB or Ethernet chassis for a lower cost system that requires an external PC. This system accepts a variety of C Series I/O modules, so you can mix and match microphones, accelerometers, and temperature and bridge-based sensors.
-
ScopeCheck® MB - Werth Inc.
Flexible CMM for large measuring ranges using moving bridge designHeavy duty granite base for increased stability and improved accuracy to operate in a shop floor environmentThree independent and flexible light sources to provide unlimited lighting methodsContour image processing for fully automatic measurements of simple and complex geometrical elementsAdditional optical sensors on Rotary-Tilt heads allow for measurement of large workpieces from multiple angles with a single setupThe Werth LLP Laser line sensor is used for rapid scanning of 3D workpieces with high point densityTemperature compensation included
-
NI
The C Series PROFIBUS Interface Module features PROFIBUS DP RS485 baud rates from 9600 b/s to 12000 kb/s. PROFIBUS is an industrial network for reliably connecting programmable logic controllers, I/O, sensors, and drives over long distances in industrial environments. C Series PROFIBUS Interface Modules include the NI‐PROFIBUS for CompactRIO instrument driver for human-machine interface (HMI) and SCADA applications, as well as graphical networking Configurator software. You can configure the C Series PROFIBUS Interface Module as a powerful master or slave device.
-
NI
The C Series PROFINET Interface Module provides two PROFINET interface ports that enable you to reliably connect programmable logic controllers (PLCs), I/O, sensors, and drives over long distances in industrial environments. PROFINET is an application protocol that uses familiar concepts from PROFIBUS that are implemented on the physical layer of Ethernet. The C Series PROFINET Interface Module includes NI-PROFINET driver software for human machine interface (HMI) and supervisory control and data acquisition (SCADA) applications. You can perform PROFINET device automated test using these interfaces.
-
KiDAQ - Kistler Instrument Corp.
KiDAQ is an innovative, modular data acquisition system (DAQ) from Kistler. With it, you can create your test setup, perform your measurements and achieve reliable results almost instantly. Our expertise covers the entire measuring chain, from the sensor, to signal conditioning, and on to the software. The KiDAQ data acquisition system can be expanded at any time with measuring modules and measuring units. Third-party sensors can also be integrated into the system. Our unique software guides you step-by-step through the measurement setup and provides the user with valuable insight over the entire measuring chain.
-
Kasuga Denki, Inc.
electrostatic potential monitoring device that has an interface for connecting our potential sensors EMS-01 / EMS-01A / KS-2100 and measures static electricity in real time. It is possible to monitor static electricity with simple The compatible potential sensor EMS-01 / EMS . With SD card support, measurement data and alarm history can be collected with a time stamp. Operation using the touch panel display and screen display, and to notify and manage the measurement status with multiple control outputs. ...-01A Has Passed The Intrinsically Safe Explosion-Proof Structure Certification In Combination With The Safety Cage KS-301A, And Can Be Used In A Dangerous Atmosphere.
-
Elbit Systems of America®
Elbit Systems of America’s Degraded Visual Environment (DVE) solution uses intuitive 3D grid symbology along with a helmet tracker to provide critical helicopter/tilt-rotor cues during brownout operations. This system, which is an upgrade to the head-up display installed on many military helicopters, removes weight or drag penalties by eliminating nose-mounted sensors. The helmet tracker provides numerous ancillary benefits such as depicting the other pilot’s Line of Sight (LOS) for improved crew coordination, as well as providing the ability to slew weapons or optical payloads to the pilot’s LOS, hands-free and heads-up.
