Filter Results By:

Products

Applications

Manufacturers

Sensors

detect a physical event then translate to a representative analog signal.

See Also: Measurement, Detectors, Meters, Transducers


Showing recent results 2641 - 2655 of 2820 products found.

  • Multiparameter Water Quality Meter

    ProDSS - YSI Incorporated

    Handheld multiparameter instrument with multiple cable options. The YSI ProDSS (digital sampling system) handheld multiparameter meter provides extreme flexibility with two main cable options. Choose between the fully loaded 4-port cable assembly outfitted with any four DSS sensors (with depth or no depth) or the ODO/CT probe and cable - where you get accurate DO measurements every time with an optical dissolved oxygen sensor with an inline conductivity sensor, allowing for real-time salinity compensation.

  • QST286

    Qmax Test Technologies Pvt. Ltd.

    The Qmax Model QST286 is a compact small foot print, sophisticated automatic semiconductor tester. Its state-of-the-art hardware design which is freely configurable to user's application requirements and software features makes it ideal for high throughput production testing of wide range of low pin count medium power ICs as listed below but not limited to Optocouplers, Isolators, LEDs, Photo diodes, Photo transistors, Photo sensors, Photo detectors , Analog Mux , Relays and more.

  • 204.8 kS/s, 119 dB, 6 Gains, AC/DC-Coupled, 4-Input PXI Sound and Vibration Module

    PXIe-4464 / 783087-02 - NI

    204.8 kS/s, 119 dB, 6 Gains, AC/DC-Coupled, 4-Input PXI Sound and Vibration Module—The PXI‑4464 delivers simultaneous sampling on all channels. In addition, the PXI‑4464 includes built-in antialiasing filters that automatically adjust to your sampling rate, six software-selectable input gains ranges, and TEDS smart sensor support for error-free setup. The IEPE excitation circuit can deliver current for high-power sensors and strong data integrity over long sensor cable runs.

  • 204.8 kS/s, 119 dB, 6 Gains, AC/DC-Coupled, 4-Input PXI Sound and Vibration Module

    PXIe-4464 / 783087-01 - NI

    204.8 kS/s, 119 dB, 6 Gains, AC/DC-Coupled, 4-Input PXI Sound and Vibration Module—The PXI‑4464 delivers simultaneous sampling on all channels. In addition, the PXI‑4464 includes built-in antialiasing filters that automatically adjust to your sampling rate, six software-selectable input gains ranges, and TEDS smart sensor support for error-free setup. The IEPE excitation circuit can deliver current for high-power sensors and strong data integrity over long sensor cable runs.

  • Image Processing Module

    IMP20 - Abaco Systems Inc

    The IMP20 video processing mezzanine card significantly increases the ease of acquiring and interpreting images from multiple sensors and cameras, thus speeding reaction time and potentially saving lives. The card adds image fusion capabilities to Abaco Systems’ ADEPT104 and AIM12 automatic video trackers, and allows the design of highly integrated, high performance graphics capabilities in any environment where the input from multiple devices needs to be combined in order to provide a complete, easy-to-interpret image.

  • Valve Diagnostic System

    QUIKLOOK 3-FS - Teledyne LeCroy

    Capable of testing all types of valves, the QUIKLOOK 3-FS Valve Diagnostic System acquires clean and accurate data, minimizes setup time, and maximizes ALARA. The powerful, flexible QUIKLOOK software provides a variety of diagnostic tools and time-saving features to simplify valve testing. Support for industry standard sensors as well as a large 15” touch screen and hot-swappable battery power provide convenient setup and easy operation. The QUIKLOOK 3 is a major advance in valve testing technology for the nuclear power industry.

  • Integrated Dual Head (IDH) Multibeam Echosounder - Shallow Water

    SeaBat IDH T20/50-R - Teledyne RESON B.V.

    The SeaBat Integrated Dual Head (IDH) is the latest addition to the leading SeaBat T-series product range. Connected to just one very compact Rackmounted Sonar Processor (RSP), the SeaBat IDH is a complete and powerful sonar system.The SeaBat IDH, which produces 1024 beams per ping, is fully frequency agile from 200 to 400kHz, allowing for improved swath performance, less interference from other sensors and reduced survey time under challenging acoustic conditions.

  • Process Controllers

    Orbit Controls AG

    Orbit Controls process controllers are designed for direct connection to virtually all industrial sensors and signal sources. They can be used as process monitors to display the process variables to be measured or as process controllers to monitor processes. In addition to the digital display, the devices also have data interfaces, analog outputs and set point outputs. Simple process monitors are optimized in the factory for the desired measuring range and function at the customer's request. The programmable controllers can be parameterized on site via the keyboard or the data interface.

  • ±500 mV, 50 kS/s/ch, 24-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module

    NI-9238 / 783311-01 - NI

    ±500 mV, 50 kS/s/ch, 24-Bit, Simultaneous Input, 4-Channel C Series Voltage Input Module - The NI‑9238 performs differential analog input. The measurement range is compatible with many low-voltage sensors such as current shunts and current transducers in high-current applications. … When used with higher-voltage C Series Voltage Input Modules, the NI‑9238 can measure power and energy consumption for applications such as appliance test, industrial machine monitoring, power quality analysis, phasor measurements, and harmonic analysis.

  • PXI Analog Output / Current Loop Simulators

    Pickering Interfaces Ltd.

    These modules are aimed at simulating industrial control transceivers, utilizing 4–20mA current loops. The modules include built-in relays for shorts and opens functionality enabling fault insertion testing on every channel and also enable slew rates to be programmed so that different sensors can be effectively mimicked. Delivering from 4 up to 16 channels in one PXI slot, the modules are the highest density simulators of their type, freeing up PXI or LXI/USB chassis slots for other instrumentation.

  • CONTAMINATION MONITORING

    Semilab

    There is no disputing the detrimental effect of metallic contamination on the integrity of the critical gate oxide used in integrated circuits. During high temperature processing contamination in the silicon wafer often precipitates as a defect at the Si/Dielectric interface or segregates to the dielectric in either case it has the potential to cause pre-mature device failure and a reduction in product yield. The probability of metallic contamination impacting yield is a function of the chip size (e.g. technology node/critical dimension) and the defect density (e.g. the amount of contamination), such that as device dimensions decrease, maintaining yield requires a corresponding reduction in contamination. Figure 1 clearly demonstrates the reality of this relationship over the past 25 years, during which time the IC industry has experienced a more than 3 orders of magnitude reduction in typical background Fe concentration observed in new fabs. More importantly is the near-term projection, where over the next few years another order of magnitude reduction is needed to meet the requirements of state of the art Si IC manufacturing; with white pixel reduction in CMOS Image Sensors being a major stimulus for this effort.

  • AERINOS Sigfox IoT

    Infinite Industrial Informatics Lt

    Sigfox is a communication protocol that is used to read data from sensors through a fixed network of base stations. It works like a low cost “SMS” service. As an end-user, you only need to buy a subscription to connect to the data network operated by SIGFOX. Sigfox employs a proprietary Ultra Narrow Band (UNB) radio technology that enables communication using the Industrial, Scientific and Medical ISM radio band, which uses 868MHz in Europe and 902MHz in the US. It has the advantage of covering larger areas than other fixed local systems.The overall Sigfox network topology has been designed to provide a scalable, high-capacity network, with very low energy consumption, while maintaining a simple and easy to rollout star-based cell infrastructure. The density of the cells in the Sigfox network is based on an average range of about 30-50km in rural areas and in urban areas, where there are usually more obstructions and noise is greater, the range may be reduced to between 3 and 10km.According to the latest numbers, Sigfox has a nationwide live coverage in 6 countries and in 14 other countries it is deploying and rolling out ts network. By end 2018, the ambition is to cover 60 markets.

  • Wafer-Level 1/f Noise Characterization System

    9812DX - ProPlus Design Solutions Inc.

    9812DX provides a true 10 megahertz (MHz) bandwidth for accurate on-wafer noise measurement and user can also measure very low-frequency noises starting at 0.03Hz. 9812DX has the lowest system resolution for on-wafer measurement at 1×10-27A2/Hz, a 10X+ improvement over 9812D. It enables noise measurement of extreme low DC current at 0.1nA, a requirement for advanced designs that need to bias devices at weak inversion conditions, dark current noise of photodiodes or image sensors for many consumer, communication, automotive and industrial applications. Additionally, it handles high-voltage device operations up to 200V and a wider range of measurement conditions and device types. Those include bulk MOSFET, FinFET, FD-SOI, bipolar junction transistors (BJTs) and junction field effect transistors (JFETs) and various diodes, such as photo, laser and Zener diodes, wide range of resistors (10 to 10M ohm), including voltage-controlled resistors, and integrated circuits (ICs). 9812DX is the only system on the market that supports a complete range of impedance for both high and low impedance devices and works with the most advanced technology nodes, from 16-nanometer (nm) and 14nm to 10nm and 7nm technology development.

  • Multi-frequency Ultrasound And Acoustic Imaging Camera

    SonaVuTM - SDT Ultrasound Solutions

    SonaVu™ is an acoustic imaging camera. Using its 112 ultrasound sensors and optical camera, it can detect sources of airborne ultrasound and transmit them into a visual image on its touch screen. Defects such as compressed air system leaks, compressed gas system leaks, vacuum leaks, the presence of partial discharge on electrical assets, and failed/working steam traps all create turbulence. And when there is turbulent flow present, there is airborne ultrasound. SonaVu™ makes the superhuman hearing capabilities of SDT Ultrasound Devices visible to the human eye.

  • Light-to-Frequency

    ams AG

    Light-to-Frequency (LTF) sensors convert measurements of light intensity to a digital form for direct interfacing to a microcontroller. The output of the device is a square wave or pulse stream the frequency of which is linearly proportional to the light intensity. LTF converters are designed for applications such as ambient light measurement, light absorption/reflection in products such as white goods, photographic equipment, colorimetry, chemical analyzers and display contrast controls. They may be used in any system that requires a wide dynamic range, and/or high resolution digital measurement of light intensity.

Get Help