Filter Results By:

Products

Applications

Manufacturers

Reliability

assured quality and continuity of performance.

See Also: Life Cycle, HAST


Showing recent results 1141 - 1155 of 1324 products found.

  • Mobile Application Testing

    Updoer Technology

    Our Mobile Testing application services involves in designing and development of test strategies and test cases, creation of test scripts and test harnesses, building of test automation framework, testing execution and recording, bug reporting and recommendations, maintenance of test suits, tech support by engineers, one time delivery and economical testing cost, performance, stress capacity and reliability testing, carrier based testing, Interoperability and compatibility testing and data synchronization and exchange testing.

  • Multi-Port Suite

    PSA-MPT & PSL-MPT - Sifos Technologies, Inc.

    While most PSE ports are part of multi-port PSE, behaviors of such systems of PSE ports are beyond the scope of IEEE 802.3 specifications. The one-of-a-kind Multi-Port Suite enables flexible emulation of many PD’s and fully automated testing of PSE port administration and power management behaviors while powering up to 192 Type-1, Type-2, or Type-3 (Class 4) PD’s. 2-Pair Multi-Port Test Suite• In-Depth System Testing of IEEE 802.3at and 802.3bt 2-Pair PSE's Using PSA-3000 or PSL-3000 instruments• Concurrently Analyze Up To 192 PSE Ports• Robust Emulation of Type-1, Type-2, and Type-3 (Class 4) PD's Including PoE LLDP• Fully Automated Testing and Reporting• Assess PSE Power Administration Decisions• Assess PSE Power Management Behaviors• Static and Transient Reserve Capacity Analysis• Per-Port Variation and Uncertainty Analysis• Assess PSE Power Reliability Over Time• Colorful and Graphical Pop-Up Spreadsheet Reporting

  • [5kV AC/6kV DC] Hipot and Insulation Resistance Tester, Rise/Fall-Time Control Function Equipped

    TOS5300 Series - Kikusui Electronics Corp.

    The "TOS5300 Series" is a series of test instruments used in Hipot (withstanding voltage) tests and insulation resistance tests, two of the four tests regarded as necessary for ensuring the safety of electrical products. With an output of 5 kV/100 mA (AC) and 6 kV/10 mA (DC), the series can be used in Hipot (withstanding voltage) & insulation resistance testing of electronic equipment and electronic parts, based on the requirements of IEC, EN, UL, VDE, JIS, and other international safety standards and the Electrical Appliance and Material Safety Law. Also, the test voltage stability is improved with the adoption of a newly developed switching amplifier. Since the output voltage can be kept constant even when the AC line voltage or frequency changes, consistent testing can be performed, even when the power supply environment is in an unstable region. The TOS5300 is also equipped with a number of features that are capable of meeting a variety of test needs. It is a new low-cost standard model that provides thorough operability, reliability and safety.

  • ARC Fusion Splicer

    FBT-19S - Shanghai Fibretool Technology Co.,Ltd.

    FBT-19S Optical Fiber Fusion Splicer is small size optical fiber fusions splicer, mainly used for fusion and protection of common communications fibers. The rich functionality and ultra-low splice loss make the splicer adaptive to fiber splicing in various environments. It is featured with small size, light weight, high reliability, greater environmental adaptability, dust-resistant, water-resistant and shock-resistant. Multiple fusion modes and heating modes are available to meet diversified customers’ demands. Fiber loading becomes more convenient and accurate thanks to the ceramic V-groove of high precision, which is easy for clean and maintenance. The splicer is capable of dual-directional fusion. The monitor is a touch screen delivers fresh designed graphical interfaces, which are simple for operation. The modular pluggable lithium-ion battery of large-capacity ensures long-time field operations. The auto environment compensation system greatly improves adaptability of the splicer to hostile environments, so that low-loss splice can be remained consistent in various environments.

  • Automated Thermal Stress System

    ATSS Series - Thermotron Industries

    Thermotron's Automated Thermal Stress Systems (ATSS) facilitate extremely rapid product temperature change rates in a space-saving, self-contained design that accelerate a Thermal Stress test. Thermotron's ATSS chambers meet the latest MIL-STD 883E and MIL-STD 202F thermal shock specifications as well as JEDEC and IPC test methods. ATSS chambers are capable of the following: Rapid thermal shocking, Accelerated product stressing, Controlled thermal cycling in a self-contained, compact design. With separate hot and cold zones, the Automated Thermal Stress System was designed with a patented retractable product transfer carrier that makes full use of the available working volume in both temperature zones for increased product loading and throughput. The product transfer carrier reduces the overall height requirements of the chamber and is made as light as possible to minimize thermal loading restraints. Thermotron ATSS chambers can be used as part of most commercial reliability and quality control programs, helping to determine:

  • Fixed Frequency Oscillator

    Series 830 - Milimeter Wave Products, Inc.

    Mi-Wave’s 830 Series fixed frequency oscillator source are available in 18 to 110Ghz frequency range. This source can be used for a mixer local oscillator or transmit source. The 830 Series is a moderate stability source and is commonly found in applications like radar, radiometers, local oscillators, telecommunications and others. Very high power sources available.• Low Noise• High Stability• 18 to 110 GHz• Broadband Tuning• Excellent Reliability• In-Built Regulator• Heatsink Included for high power sources

    Fixed Frequency Oscillator

    If you are looking for fixed frequency oscillators we have the production capabilities to meet your needs. At Millimeter Wave Products Inc. (Mi-Wave) we specialize in manufacturing the highest fixed frequency oscillators for all your needs.View more oscillators on our website.

  • Humidity and Temperature Probes & Filters

    Rotronic Instrument Corp.

    The HygroClip2 is a completely new type of probe in a class of it's own in terms of accuracy and performance. Thanks to the new AirChip3000 technology, it also boasts a unique calibration and adjustment process as well as many other superb innovations. At the same time ROTRONIC has taken humidity measurement technology to a whole new level of performance and reliability: the HygroClip2 offers you the best possible reproducibility and a superb system accuracy of < ±0.8 %rh and ±0.1 K. The new HygroClip2 is available in various formats: from a simple plug-in probe for handheld instruments and data loggers to the highly developed cable probes for high temperature and other special applications, we can provide you with exactly the right probe to suit your needs. As standard, they all have high accuracy, which can be increased further by specific adjustments within our patented AirChip, making every probe in our range a high-end product for all applications.

  • Microwave Wideband Externally Modulated Transmitters

    MT82 (30KHz~40GHz) - Hangzhou Huatai Optic Tech. Co., Ltd.

    MT82 series microwave optical transmitter, adopts external modulation technique, are able to transmit 40GHz microwave RF signal with long distance, wide bandwidth, and flat responsibility. They provide an outstanding linearity fiber optical communication for analogue and digital wideband microwave application. Due to avoidance of using expensive coaxial cable or wave guide, there will be no limitation in transmission distance, which improves the signal quality and reliability of the microwave communication. They can be widely applied in microwave communication system such as remote wireless; timing and reference signal distribution, telemetry, measurement and delay line etc as well as 10Gb/s and 40Gb/s high speed communication system. MT82 adopts low noise, narrow linewidth CW DFB laser as light source; LiNbO3 external modulator as signal modulation, no laser chirp, low dispersion distortion, high extinction ratio, Full-transparency operation mode. It can be applied in long distance and extra-long distance transmission after EDFA.

  • Microwave Wideband Externally Modulated Transmitters (without RF Amp)

    MT80 (30KHz~40GHz) - Hangzhou Huatai Optic Tech. Co., Ltd.

    MT80 series microwave optical transmitter, adopts external modulation technique, are able to transmit 40GHz microwave RF signal with long distance, wide bandwidth, and flat responsibility. They provide an outstanding linearity fiber optical communication for analogue and digital wideband microwave application. Due to avoidance of using expensive coaxial cable or wave guide, there will be no limitation in transmission distance, which improves the signal quality and reliability of the microwave communication. They can be widely applied in microwave communication system such as remote wireless; timing and reference signal distribution, telemetry, measurement and delay line etc as well as 10Gb/s and 40Gb/s high speed communication system. MT80 adopts low noise, narrow linewidth CW DFB laser as light source; LiNbO3 external modulator as signal modulation, no laser chirp, low dispersion distortion, high extinction ratio, Full-transparency operation mode. It can be applied in long distance and extra-long distance transmission after EDFA.

  • Multi Smart Camera Vision System

    In-Sight VC200 - Cognex Corporation

    The In-Sight VC200 multi smart camera vision system brings the proven reliability of standalone In-Sight vision systems to multi camera vision applications. You can easily attach up to four In-Sight cameras to a controller for multi-view inspections in your manufacturing environment. For the first time, you can leverage the power of distributed vision processing with multiple smart cameras for high-performance applications. The In-Sight VC200 is the only multi-camera system that gets faster as you add cameras. The system also provides access to In-Sight's proven vision tools, including PatMax RedLine, OCRMax and more. The graphical application workflow provides the flexibility to control triggering and acquisition. It also simplifies applications by separating the inspection into manageable tool blocks and communicates the combined results to a PLC. Platform independent HMI technology allows you to monitor and control the In-Sight VC200 on any device over the network using a web-browser without special hardware or installing additional software.

  • Outdoor Infrared Motion Sensor

    ENVIROMUX-IMD-O - Network Technologies Inc

    Outdoor weatherproof - high reliability against water and insects. Double conductive shielding to eliminate false alarms from light sources. Registers movement in the area covered: 40 ft (12 m) x 50 ft (15 m) - 120° wide. LED lights during detection. Selectable detection paterns: Multi-Level (40 zones) or Pet Alley (18 zones). Unwanted detection areas can be eliminated using the included area masking strips. Selectable Sensitivity: High, Mid and Low. Adjustable to the brightness of surrounding environment with the Day/Night Mode switch. Tamper switch opens when cover is removed. Screw terminal. To connect to the RJ45 inputs use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal. Operating temperature: -4 to 122°F (-20 to 50°C). IP54 compliant. Powered by ENVIROMUX-2D/5D/16D.

  • Pico-ITX SBC With Intel® Atom® Processor E3845/E3827, LVDS/VGA, LAN And Audio

    PICO841 - Axiomtek Co., Ltd.

    The PICO841, an extreme compact embedded pico-ITX motherboard, is designed to support the latest 22nm quad cores Intel® Atom® processor E3845 or dual cores E3827 (codename: Bay Trail) with one DDR3L system memory maximum up to 8 GB. With its compact size and ultra-low power consumption, it is perfect for space-limited and power saving environments. Otherwise, the energy-efficient embedded board is built to withstand wide temperature conditions, ranging from -20°C to +70°C (-4°F to +158°F). Integrated with Intel® HD graphic engine, the PICO841 supporting VGA and 18/24-bit dual channel LVDS in dual-view provides faster and better graphic performance. Furthermore, to increase the connectivity and reliability, the rich feature of I/O interfaces are integrated to allow flexible cabling. Coming with two PCI Express Mini Card sockets, the pico-ITX mainboard offers excellent extensibility.

  • Telos Systems

    Linear Acoustics

    Telos Systems—part of the Telos Alliance—was founded in 1985 by Steve Church, a talk show radio host and engineer who was dissatisfied with the poor quality of the on-air telephone calls on his shows. He was also an Engineer determined to do something about it. The resulting Telos 10 telephone interface system was a great success, inspiring Steve to build a business to make and sell the systems. Telos Systems has since become the industry leader in broadcast telephone systems and IP and ISDN codecs. The breakthrough Telos Zephyr audio codec, for example, is one of the most successful digital broadcast products in history, with more than 21,000 in use worldwide. Telos telephone hybrids and on-air talk show systems set the performance benchmark for the industry, and we continue to pioneer groundbreaking technology that pushes boundaries and gives broadcasters the telephony solutions they need for reliability, efficiency, and the best possible sound quality.

  • Voltage Controlled Oscillators

    Series 840 - Milimeter Wave Products, Inc.

    Your product descriptioMi-Wave’s 840 Voltage controlled oscillator (VCO) sources are available in 18 to 110Ghz .This source can be used as a modulated transmitter or local oscillator . Common applications include radar, swept sources and telecommunications systems. Feature highlights of this voltage controlled source are:• Low Noise• High Reliability• 18 to 110 GHz• Voltage Tuning• In-built Regulator• Heatsink included for high power sourcesNOTE: High power available for narrow band VCO sources.

    Voltage Controlled Oscillators

    If you are looking for Voltage Controlled Oscillators we have the production capabilities to meet your needs. At Millimeter Wave Products Inc. (Mi-Wave) we specialize in manufacturing the highest quality voltage controlled oscillators on the market for all your needs.View more voltage controlled oscillators on our website.

  • Fuel Flow and Torque Converter

    Model 44SM1 - North Atlantic Industries

    This self-contained, remotely mountable Second Harmonic Fuel Flow Interface accepts data from a second harmonic fuel flow transmitter then converts this information into a frequency output proportional to fuel flow. In addition, this module will accept signals from a T56 Torque Tranducer and provide a DC voltage proportional to Torque. Typical application is for use with Flight Management and Nav Management Systems. The use of field proven designs and carefully selected components assures high reliability field performance.