Filter Results By:

Products

Applications

Manufacturers

Reliability

assured quality and continuity of performance.

See Also: Life Cycle, HAST


Showing recent results 841 - 855 of 1325 products found.

  • Low Profile PCI 8-Port RS-232 Serial Interface

    Sealevel Systems, Inc.

    The 7803 Low Profile PCI serial interface provides eight RS-232 serial ports capable of data rates to 460.8K bps. Each RS-232 port implements all modem control signals for maximum compatibility with a wide range of peripherals. The board is MD1 Low Profile and Universal Bus (3.3V and 5V) compatible and utilizes 16C864 UARTs to provide 128-byte Tx/Rx FIFOs for maximum reliability in data intensive applications. The board ships with a 36 inch cable that terminates to eight DB25M connectors.

  • Magnetic Field Generator

    PFM61000-8A - Lisun Electronics Inc.

    PFM61000-8A Magnetic Field Generator is high reliability test equipment with stable performance, specially designed for electrical and electronic products for measuring immunity characteristics and requirements of normal frequency magnetic fields. It provides an accurate basis for the tested equipment in the immunity test of normal frequency magnetic field. The generator can imitate the magnetic field environments such as residential, commercial, industrial and mining enterprises, power plants, as well as middle and high substation. It fully meets IEC61000-4-8 and GB / T17626.8 standards.

  • Molecular Diagnostic Device

    Spartan Cube - Spartan Bioscience Inc.

    Enabling DNA testing with unprecedented portability and convenience. A revolutionary device that fits easily into any space, whether in a hospital, doctor''s office, or pharmacy. The incredible power of molecular diagnostics right at your fingertips. The reliability of PCR chemistry. Infectious disease testing when you want to quickly test a sick patient. Companion diagnostics testing for drug response. Food and water safety testing for environmental monitoring. The Spartan Cube provides results when and where you need them.

  • Multiple Output Dual-range Switching DC Power Supply

    TP-2606 - Twintex Electronics Co., Ltd

    TP-2606 switching mode DC power supply provides 375W output capacity with three independent outputs and CH1/CH2 two range output (30V/ 6A or 60V/3A), which accommodates a wide range of applications. On the basis of fixed output capacity, it enables output voltage or current to the maximum. With high power density and high conversion efficiency, multiple protections, high reliability, low noise and compact design, TP-2606 is completely adequate for satisfying mainstream power supply demands.

  • OCPM CWDM

    BaySpec, Inc.

    Coarse Wave Division Multiplexing (CWDM) covers the full 18 channel ITU-T G.695 standard. CWDM technology uses fixed 20nm spacing between the wavelengths, from 1310nm to 1610nm. High reliability (GR-1209/1221 qualified) is achieved through a rugged mechanical design with no moving parts. Periodic calibration is not required. Input/Output (I/O) is provided through a dual port RAM interface accessed through ADD/DAT bus direct connection or serial (RS232 or USB) communications.

  • Power Amplifiers

    HXI, llc

    The HMPA and HHPA Series of Medium and High Power Amplifiers covers select bands from 20 to 100 GHz. A wide variety of gain and bandwidth combinations are available to provide the designer with a solution for most applications. Custom designs are available and in many cases NRE is not required. MMIC technology is exclusively employed for high reliability and repeatability. Each power amplifier contains a voltage regulator and bias sequencer allowing the use of a single bias voltage to power the amplifier, saving the user the complication of providing this circuitry.

  • Power Frequency Transducer

    PP1S - Hsiang Cheng Electric Corp

    1. Measuring and conversion IEC 6882. Dielectrical strength IEC 688 4 KVac / 1 min.3. Impulse test ANSI C37.90 / 1989 IEC 255-3 5KV ( 1.2 x 50 us ) 3KA ( 8 x 20 us ) - current coil4. Surge test (ring wave) ANSI C37.90 / 1989 ( 3KV - 0.5us / 100KHz ) IEC 255-3 ( 2.5KV - 0.25ms / 1MHz )5. Adaptability for power system VDE 0110 6. Measuring reliability VDE 3540

  • PXI 16-Channel 4-Bus 2A Fault Insertion Switch

    40-197A-002 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.

  • PXI 34-Channel 4-Bus 2A Fault Insertion Switch

    40-197A-001 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.

  • PXI Dual Bus 32-Chan 2A Fault Insert Switch

    40-190B-202 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.

  • PXI Dual Bus 64-Chan 2A Fault Insertion Switch

    40-190B-102 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.

  • PXI Dual Bus 74-Chan 2A Fault Insertion Switch

    40-190B-002 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.

  • PXI Single Bus 32-Ch 2A Fault Insertion Switch

    40-190B-201 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.

  • PXI Single Bus 64-Ch 2A Fault Insertion Switch

    40-190B-101 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is dual bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.

  • PXI Single Bus 74-Ch 2A Fault Insertion Switch

    40-190B-001 - Pickering Interfaces Ltd.

    This PXI Fault Insertion switch family is available with 74, 64 or 32 channels (this version is single bus, 74-channel). It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test: Open-Circuit. Short-Circuit between UUT connections. Short-Circuit to other signals such as Power, Ignition and Ground via Fault Insertion Bus.