Filter Results By:

Products

Applications

Manufacturers

Protocol

A standard way of controlling hardware and/or software that enables connection, communication and data transfer.

See Also: NTCIP, Communication Protocol


Showing results: 721 - 735 of 1112 items found.

  • Compact PCI Bus Analyzer / Exerciser

    CPCI650 - Silicon Control Inc.

    The CPCI650 analyzer provides a multitude of functions to help you analyze your system.- Capturing bus activity using sequential triggers and filters- Exerciser to perform memory, I\O and configuration cycles- Stimulus generation for hardware simulation and fault generation- Anomaly detection of protocol and timing violations- Performance analysis of utilization, transfer rates, latency, statistics

  • PMC Bus Analyzer / Exerciser

    PMC650 - Silicon Control Inc.

    The PMC650 analyzer provides a multitude of functions to help you analyze your system.- Capturing bus activity using sequential triggers and filters- Exerciser to perform memory, I\O and configuration cycles- Stimulus generation for hardware simulation and fault generation- Anomaly detection of protocol and timing violations- Performance analysis of utilization, transfer rates, latency, statistics

  • Bus Analyzer / Exerciser

    PCF650 - Silicon Control Inc.

    The PCF650 analyzer provides a multitude of functions to help you analyze your system.- Capturing bus activity using sequential triggers and filters- Exerciser to perform memory, I\O and configuration cycles- Stimulus generation for hardware simulation and fault generation- Anomaly detection of protocol and timing violations- Performance analysis of utilization, transfer rates, latency, statistics

  • Analytical Chemistry Test

    Aero Nav Laboratories, Inc.

    Spectroscopy, Chromatography, Electrochemistry, Thermal Analysis, and Advanced Physical Testing Protocols!Certified Testing per EPA / FPA / ISO / ASTM / USP-NF / CODEX / AOAC / AOCS Chromatography (gC & HPLC), Heavy Metals (DCP, AAS, I-C & XRF), Spectroscopy (FT-IR, UV-VIS, & Fluorescence), Foods & Nutrition, Environmental Impact, Complete MSDS Testing & Green/LEEDS Certification, Military.

  • Contamination Analysis

    National Technical Systems

    Contamination Analysis, which begins with a set of basic evaluations that on most occasions will answer the “What is this?” question. The protocol contains four parts:*Visual Examination*Organic Analytical Testing by Fourier Transform Infrared (FTIR) Spectroscopy*Elemental Analytical Testing by Scanning Electron Microscopy / Energy Dispersive X-Ray Spectroscopy (SEM/EDS)*Ionic Analytical Testing by Ion Chromatography (IC)

  • Infrared Gas Detector

    iTrans2 - Teledyne Gas & Flame Detection

    The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.

  • FaxLab

    QualityLogic

    FaxLab automates testing for timing delays, dropped packets or other network anomalies that corrupt fax calls. You can create an end-to-end test system that plays both originator and answering party in a fax call using FaxLab and multiple ChannelTraps. This system identifies fax message degradation caused by the network transport, as well as fax protocol violations.

  • Battery Testing System

    C8000 - Cadex Electronics Inc.

    The Cadex C8000 stands in a class by itself in flexibility and affordable price. Test SMBus batteries, monitor cell balance and capture load signatures to observe batteries with a unique load protocol. Add a thermal chamber, an external load bank, a safety circuit and alarm to form a command center and you begin realizing the unique qualities of this fine battery testing system.

  • Conformance Test Systems

    Anritsu Corporation

    With an established market leadership position in GCF and PTCRB approvals for LTE-Advanced and all leading-edge technologies, Anritsu continues expanding its number of test case validations in GCF and PTCRB for Protocol, RF and RRM conformance testing. With increasing complexity of wireless technologies, Anritsu Conformance Test systems provide easy-to-use control software to maximize testing efficiency.

  • Autonomous RTU

    ADU-500 - Infinite Industrial Informatics Lt

    ADU-500 is an ultra low power, wireless RTU with data logging and alarming capabilities. The battery powered RTU incorporates three digital inputs, two analog inputs, one pulse counter input and multiple excitation options for powering measuring transducers. The device supports acquisition of up to 48 measurement channels, based on the popular SDI-12 communication protocol.

  • PCIe-6536B, 32-Channel, 25 MHz, 100 MB/s Digital I/O Device

    782630-01 - NI

    The PCIe-6536 can continuously stream data over the PCI Express bus. It's an ideal solution for interfacing and testing image sensors or display panels. The module is also well-suited for other common digital applications such as pattern I/O, change detection, protocol emulation, or other custom digital interfacing. It features selectable voltage levels and per-channel directional control of the digital lines.

  • Anite Application Testing

    Keysight Technologies

    Verify higher level protocols and application enablers for a more effective roll-out of LTE-IMS based services to end-usersPerform rapid and cost-effective application testing associated with device acceptance test plans mandated by major mobile operators such as China Mobile, Verizon Wireless, AT&T and T-MobileGain access to comprehensive IMS LTE test plans mandated by standardization organizations such as GCF and PTCRB

  • PCIe-6535B, 32-Channel, 10 MHz, 40 MB/s Digital I/O Device

    782629-01 - NI

    The PCIe-6535 can continuously stream data over the PCI Express bus. It's an ideal solution for interfacing and testing image sensors or display panels. The module is also well-suited for other common digital applications such as pattern I/O, change detection, protocol emulation, or other custom digital interfacing. It features selectable voltage levels and per-channel directional control of the digital lines.

  • Ethernet Adapter Supporting up to Twenty ARINC-429 Channels in Any Combination

    ES-9810/A0 (RUNET II) - Excalibur Systems, Inc.

    The EXC-9810/Ax is an Ethernet adapter supporting up to twenty ARINC-429 channels in any combination of transmit and/or receive. All of the channels feature error injection and detection.adapter. Its small size and ability to interface through Ethernet interfaces make it a complete solution for developing, testing and performing system simulation of the ARINC-429 bus, both in the lab and in the field.The receive channels allow for the storage of all selected labels with status and time tag information appended to each word, and also allow for filtering and multi-storage modes of data words. The transmit channels operate via a transmit ‘instruction stack’ which allows scheduling of data transmissions and reduces the need for host computer intervention. The EXC-9810 supports up to four independent 8000 family avionics communication modules, allowing multiple different protocols to be mixed and matched on a single card. Modules available include MIL-STD-1553, MIL-STD-1760, MMSI, ARINC-429, ARINC-708, ARINC-717, Serial, Discrete and CAN bus. In addition, multiple units can operate on the same network, by programming each one with a unique IP address, and can be accessed from any computer on the network.The EXC-9810/Ax adapter is supplied with C drivers, including source code and may be used with Exalt, Excalibur’s Analysis and Laboratory Tools, a Windows monitoring application (only versions 8.1 or higher). Please see multi protocol 8000 modules for additional information on protocols that can be added to this card.

  • Clock and Data Recovery/Retiming

    Analog Devices Inc.

    Analog Devices provides single rate, multiple rate, and continuous tuning clock and data recovery (CDR) ICs for metro, long haul, DWDM, FSO, instrumentation, and other applications. Our any rate CDR ICs allow easy integration into protocol agnostic applications, automatically locking onto incoming data streams at any rate, from 10 Mbps to 2.7 Gbps or from 6.5 Mbps to 11.3 Gbps, without the aid of a reference clock while reporting the acquired data rate over the I2C interface. With a proprietary dual loop design, our any rate CDR ICs feature fast locking with superior jitter performance.

Get Help