Showing recent results 3796 - 3810 of 4314 products found.
-
AC-220 - Com-Power Corporation
The AC-220 Combilog antenna is for EMC emission and immunity up to 2 GHz.. It combines the electrical properties of two antenna (biconical and Log ). It reduces overall testing time by 20 - 30% due to antenna switching. It is Optimized for emission measurements, but can handle up to 500 Watt CW, making it suitable for most immunity measurements . Each antenna is individually calibrated at 10 meters and the data included the purchase price.
-
FRANKONIA GmbH
Conducted RF immunity tests acc. to IEC/EN61000-4-6 and BCI tests acc. to ISO 11452-4 and MIL-STD 461 CS 114 Signal generator,RF-power amplifier, RF-power meter and directional coupler (optional) in one 19”-caseStand-alone operation possible with optional available netbookControl-software includedMost important parameters are shown on an integrated displayAutomatic EUT-monitoringOperation via USB port of a PC or NotebookComplete range of CDNs available
-
M151 - Clarke-Hess Communications Research
The Model M151 is a stable high current calibrator up to 120 A. Basic accuracy is 0.035 %. It can be controlled viaRS232 or GPIB interface. The Model 151 can function in a simulated amplifier mode to increase the current capabilityof any multifunction calibrator. It is suitable for power meter calibration because it can be synchronized with the inputsignal not only in amplitude but also in frequency and phase. The current terminals are isolated up to 450 Vpk againstcase (protective earth).
-
6410 DM - Standard Electric Works Co., Ltd
● 3000 counts with a maximum display of 2999.● Angled display design helps the user to identify the reading of value easier.● Auto scanning function for AC/DC voltage, and current.● Auto ranging.● Range change function.● Continuity check.● Diode & Capacitance measurement.● Data hold function.● Low battery indication.● Over range indication.● Fuse protection.● Special hook design used to hang the meter for ease of use.
-
8485D - Keysight Technologies
Excellent SWR for reducing mismatch uncertaintyAccurate calibration and traceability to US National Institute of Standards and Technology (NIST)Compatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters, plus the E1416A VXI and discontinued 70100A and 43X power meterAccurate average power measurements over -70 to -20 dBmFrequency range 50 MHz to 26.5 GHz
-
E9301B - Keysight Technologies
Measure the average power of all modulation formatsWide dynamic range power measurements from -30 dBm to +44 dBm10 MHz to 6 GHz frequency coverage for Wireless Comms formatsLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
-
E9301H - Keysight Technologies
Measure the average power of all modulation formatsWide dynamic range power measurements from -50 dBm to +30 dBm10 MHz to 6 GHz frequency coverage for Wireless Comms formatsLow SWR for reducing mismatch uncertaintyCalibration factors, linearity and temperature compensation data stored in EEPROMCompatible with EPM (new N1913A/ 14A, E4418B/ 19B), EPM-P (E4416A/ 17A) and P-series (N1911A/ 12A) power meters
-
Wilcom Incorporated
Growing fiber-to-the-home (FTTH) and fiber-to-the-premise (FTTP) implementation has raised demand for specialized test equipment such as Wilcom power meters, light sources, OTDRs, loss test sets, and unique products such as identifiers for optical fiber installation and maintenance. Network service providers, carriers and optical fiber cable and systems installers know that Wilcom provides the diversity of products they need to keep up with an ever-changing industry.
-
OT-8900 - Radiantech, Inc.
FiberPal OT-8900 series instruments, with power meter built-in, are new miniature, high performance optical time domain reflectometer which is designed as fiber troubleshooter for locating fiber connector, break and imperfections for access networks. It detects event locations along the optical fiber and displays the results on a 7" color LCD display. FiberPal OT-8900 series are light, reliable and easy to use, hence it is ideal for FTTX testing.
-
N9915A - Keysight Technologies
9 GHz max frequencyCarry the world's most integrated handheld µW analyzer: standard model includes cable and antenna analyzerExpand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and moreSave time by measuring DTF and TDR in the same sweepSimultaneously measure all four S-parametersMake accurate spectrum analyzer measurements ( 0.5 dB) without needing warm-upCalibrate simply with QuickCal
-
N9912A - Keysight Technologies
CAT and VNA: 2 MHz to 4/6 GHzSA: 100 kHz to 4/6 GHzCarry the world's most integrated handheld RF analyzer: standard model includes cable and antenna analyzerExpand capabilities with optional T/R VNA, spectrum analyzer, built-in power meter, and moreSave time by measuring RL and DTF simultaneously in the same sweepCalibrate simply in the field with QuickCalEasily measure average and pulse power with a USB power sensor
-
N9914A - Keysight Technologies
6.5 GHz max frequencyCarry the world's most integrated handheld RF analyzer: standard model includes cable and antenna analyzerExpand capabilities with optional VNA, spectrum analyzer, built-in power meter, vector voltmeter, and moreSave time by measuring DTF and TDR in the same sweepSimultaneously measure all four S-parametersMake accurate spectrum analyzer measurements ( 0.5 dB) without needing warm-upCalibrate simply with QuickCal
-
ZTS Technologies Co., Ltd
Coaxial fixed attenuators are used for absorbing energy of transmission line, expanding power range and controlling power level, they are also used in accurately measuring power or spectrum of RF microwave transmitters accompany with small power meter, comprehensive tester or spectrum analyzer.ATS serial coaxial fixed attenuators featured with wide frequency band, low VSWR, flat attenuation value, excellent capacity in anti-pulse and anti-burnout etc.
-
HVR-LS/HVR-LSS - Lisun Electronics Inc.
This equipment meets the requirements of ANSI/UL94, IEC60950-1, IEC695-2-2 and GB Standard. It is used to test the appliances and plastic materials parts of electrical equipment for the horizontal, vertical flammability test. The product tank shell is irony spray, and configured a transparent viewing window, the digital meter shows the burning time, afterflame time, afterglow time, this device has beautiful appearance, is easy to use and has reliable performance.
-
TW3111 - Techwin(China) Industry Co., Ltd
Laser Source TW3111 is a handheld optical light source, newly released in 2007. It can provide 1 to 6 wavelengths output to satisfy specific requirements including the 650nm visible light source and the 1310/1550nm wavelengths for single mode fiber or the 850/1300nm wavelengths for multimode fiber, as well as other wavelengths according to customer's needs. Together with the TW3211 optical power meter, it is a perfect solution for fiber optic network applications.