Filter Results By:

Products

Applications

Manufacturers

Memory

data retained.

See Also: Memory Test, DDR, NAND, DRAM, Memory Device


Showing recent results 1021 - 1035 of 1571 products found.

  • SmartFlex PoE Industrial LTE router, NAM, Metal, No ACC

    SR30518120-SWH - B+B SmartWorx

    LTE cat.3, 3G/HSPA+, GPRS/EDGE, NAM, 2x SIM2x Ethernet port with PoE support, DIN rail mountingPowerful CPU and Memory, Hosting of SW IoT applications5x ETH, PSE PoE+, PoE+ IEEE 802.3at & 802.3af on 2x ETHWiFi 2.4/5 GHz, GPS, USB, I/O 2x IN + 1x OUT, MicroSD,Operating temp. -25 to +55 °C, Power supply 10-60V DCCertifications: CE, , AT&T, Verizon,Advanced networking, Diagnostics, VPN support, FirewallEasy remote management and monitoring, SW customization

  • SmartMotion Twin Module LTE router, EMEA, Metal, ACC Int.

    ST35518025-SWH - B+B SmartWorx

    LTE450, LTE cat.3, 3G/HSPA+, GPRS/EDGE, EMEA, 4x SIMTwo independent LTE connections for seamless failoverPowerful CPU and Memory, Hosting of SW IoT applications2x ETH, PSE PoE+, PoE+ IEEE 802.3at & 802.3af on 2x ETHWiFi 2.4/5 GHz, GPS, USB, I/O 2x IN + 1x OUT, MicroSD,Operating temp. -25 to +55 °C, Power supply 10-60V DCCertifications: CE, E8,Advanced networking, Diagnostics, VPN support, FirewallEasy remote management and monitoring, SW customization

  • TBC/FRAME SYNCHRONIZER

    AP41 - Hotronic Inc.

    Y/C, Composite and SDI input Simultaneous Y/C, Composite and SDI output Easy push button Video Input Selector Time base correction for Heterodyne VTRs Frame synchronization with full frame memory 4 times sub-carrier sampling, 8 bit resolution Constant H-phase for matched frame edit Constant SC/H phase Gen-Lock capability Full proc-amp control with no interruption presets Adjustable horizontal and vertical blanking Handle high speed search Option YUV output Option "Hot Switch"

  • TS2 Frame Grabber

    ATSI

    The TS2 Frame Grabber connects to the SDLC bus in any NEMA TS2 cabinet and continually records all frames transmitted between the controller, BIUs, MMU, and other auxiliary devices. The frames are stored in a circular buffer that will hold approximately 20 - 30 minutes worth of data. Anytime the MMU reports that the intersection is in "flash", the frames are automatically stored to a removable memory key. A technician may then remove the key and insert it into a reader connected to a PC. Using the FrameView software application, the frames may be viewed in an easy to understand graphical form.

  • VersaLog

    Accsense, Inc

    Our new Accsense VersaLog series of monitoring and alarming devices provide your project with highly accurate data capture and several connection options. With most models recording on 7-8 channels, Accsense VersaLog monitors many parameters including temperature, humidity, current/voltage, strain, and also offers connection with thermistors for extreme accuracy. These dataloggers also support USB, Serial port and Ethernet connections for local and remote access and store readings on a 4MB flash memory. Download, plot and analyze your data with the feature-filled Siteview software.

  • Advanced Packaging

    KLA-Tencor Corp

    KLA-Tencor offers a series of standalone and cluster inspection and metrology systems for various applications in the semiconductor packaging field. Our CIRCL-AP product supports 0.5um sensitivity all-surface inspection, metrology and review at fast throughput. It enables effective process control for advanced wafer-level packaging processes, such as 2.5D/3D IC integration using through silicon vias (TSVs), wafer-level chip scale packaging (WLCSP) and fan-out wafer-level packaging (FOWLP). Used for packaging applications associated with LEDs, MEMS, image sensors and flip-chip packaging, our WI-22x0 Series products focus on front side wafer inspection and provide feedback on wafer surface quality, quality of the wafer dicing, or quality of wafer bumps, pads and pillars. Our Component Inspector (CI) products inspect various semiconductor components that are handled in a tray, such as microprocessors, sensors or memory chips. Component defect inspector capability includes: 3D co-planarity inspection; measurement of the evenness of the contacts; component height; 2D surface inspection to check the package''s surface aspects, the identification mark and the orientation; and, the option of 5S, a bottom and all-four-side inspection that reveals certain reliability defects which are of particular interest for applications, such as mobile memory and MEMS.

  • Hardy Shaker

    HI-903 - Metrix

    This is our top of the line Hardy Shaker. It provides the ability to set the amplitude and change the frequency range without the amplitude changing. This automation makes conducting vibration tests easier. Tests can be conducted on multiple vibration transducers, and then the saved data can be transferred via USB Flash Drive to be displayed in an automated and customizable report using an Excel template on your computer. In manual mode, the vibration test level and test frequency can be set from 7 Hz to 10,000 Hz. The high accuracy instrument can display the vibration level in terms of g’s peak, velocity peak (in/sec or mm/s) or displacement peak-to-peak (mils or µm). The unit can support payloads up to 800 grams (see frequency limits in the manual). A built-in display reads the output sensitivity, which can be stored in memory. Complete testing sequences and data can be stored in memory for each tested sensor, the unit logs the data on the spot or stores it for later use. For testing of heavy transducers or at high frequencies, the HI-903 automatically corrects the sensitivity calculation for the effects of transducer mass loading. A built-in self-test program checks for accuracy of all calculations. The HI-903 has a built-in battery charger that can operate on 120 or 240 VAC. The unit comes in a rugged Pelican case.

  • Data Diver

    MT-8006B - Prokit's Industries Co., Ltd.

    LCD display for dialing number, Caller ID, Clock and other informationIndicator for determining the Line service and speedHigh impedance monitor for data safe operation without disrupting existing traffic.Smart power saving enables battery life up to 6 months12 phone number memory for speed dialing16 dialing number memoriesTone (DTMF) and pulse operationUp to 32 digits phone number memory for speed dialing keyPre-dialing and last number redial functionPBX pause key, insert a PBX pause in stored numbersTelephone line polarity indicatorsLow battery indicationBacklight functionRJ-11 port for easy test leads changeRinger and voltage LED indicationAngled bed of nails and RJ-11 plug

  • 34970A Data Acquisition Control Mainframe and Modules

    Keysight Technologies

    The 34970A 3-slot mainframe, which includes a built-in 6.5 digit DMM, can operate as a stand alone data logger with 50,000 readings of built-in memory and your choice of eight different plug-in modules. It also includes both GPIB and RS-232 interfaces for connection to your computer, as well as free Keysight BenchLink data logger software, which provides easy test configuration setup and real-time data display and analysis. The Keysight 34970A data acquisition switch unit adds performance at a fraction of the cost of other standalone data acquisition systems.

  • High Precision Digital Multimeter

    VX2120 - VX Instruments GmbH

    The VX2120 is a high precision Digital Multimeter (DMM) for high performance measurements with 24Bit resolution. It provides measurements DCV up to 1,000VDC, ACV up to 1,000VACPeak and resistance (2 or 4-wire) up to 10MΩ. The internal microprocessor is equipped with flash memory for an fast and easy software update via the VXI-Bus. This will simplify new measurement functions to be downloaded. The VX2120 does support both True-RMS and Average-Peak AC-Measurements. For high precision AC measurements the VX2120 uses the "tracking technology". This feature allows high accurate AC measurements even at very low signal frequencies.

  • 4/8-CH 12-Bit 1 MS/s Analog Output Multi-Function DAQ PCI Express Cards

    DAQe-2500 Series - ADLINK Technology Inc.

    ADLINK DAQe-2500 series are high-speed and high-performance analog output multi-function DAQ PCI EXpress cards. The devices are able to update up to 8-CH, 12-bit analog outputs simultaneously at sustaining 1 MS/s. The reference sources and the output polarities are programmable on per channel basis, combining with the multiplying DAC architecture, ADLINK DAQe-2500 series DAQ cards can generate complex modulated analog signals. The hardware-based arbitrary waveform generation frees the CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory.

  • 4 Wire Earth Resistance & Resistivity Tester

    4236 ER - Standard Electric Works Co., Ltd

    ● Microprocessor-controlled.● Earth resistivity (ρ) test.● Earth testing at 20Ω, 200Ω, 2kΩ.● Earth voltage measuring : 0-300V AC.● Automatic C spike check.● Automatic P spike check.● 2-Wire test, 3-Wire test, 4-Wire test.● LCM display.● Auto ranging.● Auto power OFF.● Data hold.● 200 measurement results can be saved in the memory   and recalled on the display.● Interval between auxiliary earth spikes is 1.0~50.0m.● Optical USB to RS-232 data transmission.● The stored data can be transferred to a PC.● 2 optical LEDs are built-in for data transfer.

  • 9th Gen Intel® Xeon®, Core™ i7/i3 and 8th Gen Intel® Core™ i5 Processor-Based Embedded Fanless Computer

    MXE-5600 Series - ADLINK Technology Inc.

    *9th Gen Intel® Xeon®, Core™ i7/i3 and 8th Gen Intel® Core™ i5 BGA processor and Mobile Intel® CM246 Chipset*Dual SODIMMs for up to 32GB DDR4 non-ECC/ ECC memory*Rich I/O: 2x DP++, HDMI, 2x GbE, 6x COM, 8-ch DI, 8-ch DO, TPM2.0*2x USB 3.1 Gen2, 2x USB 3.1 Gen1. 4x USB 2.0*Rich storage: 2x 2.5" SATA 6 Gb/s, CFast, M.2 2280

  • A/D | Digitizers | Transient Recorders

    Strategic Test

    Digitizers are the standard tool to get analog data into a PC for further processing.  They differ in the platform, sampling rate, resolution, number of channels, memory and different modes available. There are different names for the same type of product: A/D cards, Digitizers, Transient Recorders, Data Acquisition Cards, Scope Cards, PC Scope, Signal Capture Card and more. Learn more The A/D product can either come in the form of a plug-in card, as a remote/Ethernet instrument or as a complete system containing the A/D acquisition part, an integrated PC and the operating software SBench 6.

  • Analog Output Multi-Function DAQ PCI EXpress Cards

    DAQe-2500 Series - Digital Communication Technologies Ltd

    ADLINK DAQe-2500 series are high-speed and high-performance analog output multi-function DAQ PCI EXpress cards. The devices are able to update up to 8-CH, 12-bit analog outputs simultaneously at sustaining 1 MS/s. The reference sources and the output polarities are programmable on per channel basis, combining with the multiplying DAC architecture, ADLINK DAQe-2500 series DAQ cards can generate complex modulated analog signals. The hardware-based arbitrary waveform generation frees the CPU intervention even when all analog outputs are updating at full speed, and the lengths of waveforms are only limited by the system memory.