Filter Results By:

Products

Applications

Manufacturers

Light

Visible spectrum of electromagnetic radiation from 400nm to 700nm.

See Also: Illumination, Lighting, Lightning, Lightwave, Daylight, Luminescence


Showing recent results 1471 - 1485 of 1974 products found.

  • Silicon photomultipliers (SiPMs)

    First Sensor AG

    Silicon photomultipliers (SiPMs) from First Sensor are innovative solid-state silicon detectors with single photon sensitivity. SiPMs are a valid alternative to photomultiplier tubes. The main benefits of these detectors are high gain, extremely good timing performance and low operating voltage. They are insensitive to magnetic field and have a high integration level. The detectors are optimized for Near Ultraviolet (NUV) or red, green and blue (RGB) light detection with peak sensitivities at 420 nm or 550 nm.

  • 20 Channel Actuator/GP Switch Module for 34970A/34972A

    34903A - Keysight Technologies

    The Keysight 34903A is a general-purpose switch module for the 34970A/34972A Data Acquisition/Switch Unit. It has 20 independent single-pole, double-throw (SPDT) relays and is used to cycle power to products under test, control indicator and status lights, and to actuate external power relays and solenoids. Combine it with matrix and multiplexer modules to build custom switch systems. Its 300 V, 1 A contacts can handle up to 50 W, enough for many power line switching applications.

  • 2 in 1 Power Meter

    OT-2000-V - Radiantech, Inc.

    The FTTx Wide Band VFL Meter, OT-2000-V, is a powerful optical measuring tool which can be used in various optical fiber systems and applications, especially in FTTx field installation and maintenance. With 850, 1310, 1490, 1550 nm calibration wavelength, it is ideal for both single mode and multimode fiber field installation and maintenance. The additional 650nm light source makes for a convenient, easy to use yet powerful device to check for broken fibers as well.

  • CORROSION GAUGE

    MX-1 - Dakota Ultrasonics

    The MX-1 will hold a single velocity, making it the perfect choice applications where only one material is being tested day after day. With the preset velocity in the gauge, you simply turn it on and go to work. The tool's backlit display is easy to read, even in dim light conditions, and the unit operates for up to 200 hours on a single set of AA batteries. The MX-1 comes complete, ready to use, and is protected by Dakota Ultrasonics 5 year limited warranty.

  • BitScope Micro Oscilloscope & Analyzer

    BS05 - BitScope

    20 MHz Bandwidth.40 MSps Logic Capture.2 Analog Scope Channels.2 Analog Comparator channels.6 Logic/Protocol Analyzer channels.8 & 12 bit native analog sample resolution.Decodes Serial, SPI, I2C, CAN and more.Windows, Linux, Mac OS X & Raspberry Pi.Built-in analog waveform & clock generators.User programmable, C/C++, Python, VM API.Tiny, light weight (14g) and water resistant.Standard oscilloscope probe adapters available.

  • Detectors

    McPherson, Inc.

    Solar blind detector for operation in the 1 to 180 nanometer region. It is encased in a vacuum tight housing for vacuum operation. The Model 425 is ideal for measurements in the Extreme and Vacuum UV (EUV and VUV) where the solar blind feature eliminates potential interference from long wavelength ultraviolet and visible light. It may be operated in pulse-counting mode or DC. The CEM is also available with coatings like Cesium Iodide or Magnesium Fluoride to enhance response in different energy regions.

  • Digital Multimeter

    KT7201 - Ketai instrument (kunshan) Ltd.

    *20 ranges in 6 functions*Display 1999 counts*Back light*Low battery indication*Full overload procection*DC voltage measurement up to 500V (0.5%)*AC voltage measurement up to 500V (1.2%)*DC current measurement up to 10A (1.2%)*Resistance measurement up to 2M ohms (0.8%)*Continuity check*hFE test*Diode check*Fuse 0.2A 250V,10A 250V*IEC 61010,CAT II 600V

  • Digital TV Signal Meter

    King SureLock - King Controls

    Pinpoint the location of local DTV towers. Point the antenna before scanning for channels. Saves time and frustration. Eliminate the need for multiple channel scans. Takes the guesswork out of finding the towers. Simple to use, plug-n-play design. Connects to the antenna TV output or in-line. Positive signal identification. LED lights indicate where DTV signal is strongest. Variable sensitivity adjustment. Foolproof antenna pointing in both strong and weak signal areas.

  • Electrostatic Field Meter Micro Kit

    PFM-711A - Prostat Corporation

    A hand held, compact, electronic digital chopper field meter used for locating and measuring electrostatic fields.Use alone to measure fields on defined surfaces and materials. Red "Bulls Eye" ranging lights assist in obtaining reproducible measurements.Use with CPM-720A Charge Plate Assembly and PCS-730 Charging Source to balance and test ionization blowers and devices. May be used to measure charge generation related to personnel, floors, chairs, carts, equipment, packaging materials, etc.

  • Energy Dispersive Spectroscopy (EDS) Platform

    Octane Elect EDS System - EDAX

    The Octane Elect EDS System is an enhanced Energy Dispersive Spectroscopy (EDS) platform with the latest advancements in Silicon Drift Detector (SDD) technology and high speed electronics. Tailored for users who demand higher performance and functionality than the options available in entry-level systems, the Octane Elect EDS System provides excellent resolution and high throughput at an optimal value with a remarkable low energy sensitivity for light element detection and low voltage (kV) microanalysis.

  • Fiber Optic Inspection

    Optical Wavelength Laboratories

    A dependable connector endface inspection scope is a vital part of any fiber optic professional’s tool kit. Inspecting patch cord connector endfaces before attaching them to equipment or patch panels saves time and effort, and ensures a clean, quality connection. These 400x video inspection scopes allow users to view connector endfaces on a PC or laptop screen, preventing harmful invisible light from entering the users eye, and ensuring maximum eye protection.

  • Full spectrum direct reading spectrometer

    TY-9000 - Wuxi Tianmu Instrument Technology Co., Ltd.

    The TY-9000 full-spectrum direct-reading spectrometer desktop spectrometer adopts international standard design and manufacturing process technology, adopts all-digital technology, replaces the huge photomultiplier tube (PMT) simulation technology, synchronizes with international spectrometer technology, adopts vacuum light chamber design And Full digital excitation source, leading CCD detector, high-speed data readout system, the instrument has high performance, very low detection line, long-term stability and repeatability.

  • Highly Sensitive Silica Monitor

    SLIA-300 - HORIBA, Ltd.

    The ultra-pure water that is used in the semiconductor production processes can be further purified by using an ion-exchange resin. Capturing the silica that is dissolved from this ion-exchange resin as quickly as possible can control the ultra-pure water quality, which is important during the production processes.HORIBA Advanced Techno has developed and employed a new "long light path length measurement cell" to enable highly sensitive measurement of ultra-low density silica and also realized a compact desktop model to improve the usability.

  • Laser Pulse Shaper

    MIIPS-HD - Biophotonics Solutions Inc.

    MIIPS-HD is the first line of pulse shapers on the market that relies on a Hamamatsu''s 2D (792×600 pixels) liquid crystal on silicon-spatial light modulator (LCOS-SLM), and uses diffractive shaping to enable independent phase and amplitude control, without using a polarizer. The system features enhanced power (pulse energy) handling capabilities and offers superior throughput for selected spectral ranges by utilizing SLMs with dielectric back mirrors. It is ideal for direct amplified pulse compression and shaping.

  • Linear array components – “spectrometer on a chip”

    Pyreos Ltd.

    New low cost solid state IR spectrometers and IR imaging devices are made feasible by using optics and the array to disperse different wavelengths of light onto each sensor pixel. Our customers are using this breakthrough product to provide new analytical solutions in medical, industrial, and scientific fields.  Pyreos also holds key patents on the optical designs.  We use this to advise our customers on design issues and to protect their designs in key markets.