Filter Results By:

Products

Applications

Manufacturers

Light

Visible spectrum of electromagnetic radiation from 400nm to 700nm.

See Also: Illumination, Lighting, Lightning, Lightwave, Daylight, Luminescence


Showing recent results 1936 - 1950 of 1999 products found.

  • RF-Microwave Radiation Measurement

    MW-AM10 - Sensory Perspective Ltd

    The Acoustimeter is a user-friendly accurate RF measurement instrument which provides both LED lights and LCD text display of peak and average levels of radio frequency and microwave frequency electromagnetic fields, covering the spectrum from 200 MHz (digital TV and radio) all the way up to and beyond the latest 5.6 GHz WiFi and WiMax frequencies to over 8 GHz. It has a digital readout which is sensitive to 0.02 V/m and a sound output enabling you to hear the actual sound of the signal modulation. These features make the instrument the most useful one available to even those with severe electrosensitivity.

  • Fluxmeters

    Ferrites India

    Flux meter has been the established standard for the measurement of magnetic flux density for determining total flux in a magnet or magnetic assembly. Its use was curtailed except in a few specialized areas because of many factors such as the difficulty in setting up light beam flux meter or ballistic galvanometers, limitations on the ohmic resistance of search coils, the requirement of some degree of operator skill in reading the flux meter etc. The development of the integrating type Digital Flux meter has virtually cancelled the hitherto negative aspects of fluxmeterology and has found a broad niche for many magnetic measurement applications.

  • Proximity

    ams AG

    Proximity detection sensors measure reflected infrared (IR) energy to detect the presence of an object or person. The devices include an integrated LED driver and, in some devices, an integrated LED. The proximity detection devices provide four programmable LED drive currents and IR pulse repetitions. The proximity detection circuitry compensates for ambient light, allowing it to operate in environments ranging from bright sunlight to dark rooms. The wide dynamic range allows operation in short-distance detection applications behind dark glass, such as mobile phones. Proximity detection sensors can be used to replace a mechanical switch or to sense human gestures.

  • Viscometer

    LS - Chongqing Lushun Scientific & Technological Development Co., Ltd.

    This instrument is sophisticated. It adopts advanced mechanical design and manufacture techniques, and microprocessor controlling technologies, it can accurately collect test data; Take a blue background light, ultra-brighten LCD as its display, so it can display test data intuitively; Designed with a RS232 port, so it can print out test data through a printer, and it can communicate with a computer using the software attached. It is sensitive, reliable, beautiful and convenient to be operated. It is used to determine absolute viscosity of Newton liquids and apparent viscosity of non-Newton liquids. It can be widely used for determining viscosity of grease, paint, plastic, medicine, dope, adhesive, and washing solvents, etc.

  • UPG-07 - Ultrasonic Precision Gages - Monochrome

    UPG-07 Monochrome - Danatronics Corporation

    PG-07 Series of hand held ultrasonic precision gages are available in 4 models. Our UPG-07 series is the ideal unit to non-destructively test the wall thickness for manufactured parts requiring unprecedented accuracy and resolution. The UPG-07 series utilizes single element transducers and offers a 30 Mhz, square wave pulser, .0001" or 1 micron resolution with the ability to store and re-call 30 unique applications. So if you are measuring light bulbs, plastic bottles, golf clubs, coil steel, thin aluminum, aircraft parts and even pure gold bars, the UPG-07 series is the right choice.

  • Trailer Wire Plug Tester

    767943 - Wesbar

    Plug these testers into any car connector and you will have an instant test of running light circuits. Features LED display to show completed circuit for the running lights left turn signal and right turn signal. Auxiliary and electric brake circuit are included on the 6-way tester and auxiliary, electric brake and battery charge are included with the 7-way tester. One piece units with internal ground. Proper installation and set-up of a brake control, when a trailer is not readily available, is possible with the 7-way tester. Current Monitor testing device is designed to assist in determining whether a tow vehicle's 7-way blade car end connector has been wired properly. (Current Monitor is an excellent diagnostic tool for installation, setup and troubleshooting of electric trailer brake controls.) The Trailer Tester is designed to help you quickly identify problems in the wiring of the trailer. This is done by testing the Left Turn, Right Turn, Tail/Marker, Brake and Back Up circuits on the trailer. The tester indicates approximate amount of current in each circuit (i.e. trailer battery). Brake Control Bench Tester is a test device designed to determine if a brake control is working properly. Checks brake control output, independent of vehicle wiring. Simulates many fault conditions including open ground, short circuit, open load and more.

  • Fully Automatic Colorimeter

    DRK103C - Shandong Drick Instruments Co., Ltd.

    (1)5 inch TFT color LCD touch screen, the operation is more humanized, new users can be mastered in a short period of time using the method.(2)Simulation of D65 lighting lighting, using CIE1964 complementary color system and CIE1976 (L*a*b*) color space color difference formula.(3)The motherboard brand new design, using the latest technology, CPU uses 32 bits ARM processor,improve the processing speed, the calculated data is more accurate and rapid electromechanical integration design, abandon cumbersome testing process of the artificial hand wheel is rotated, the real implementation of the test program, a determination of the accurate and efficient.(4)Using d/o lighting and observation geometry, diffuse ball diameter 150mm, diameter of the testing hole is 25mm.(5) A light absorber, eliminate the effect of specular reflection.(6)Add printer and imported thermal printer, without the use of ink and color, no noise when working, fast printing speed.(7) Reference sample can be physical, but also for data,? Can store up to ten only memory reference information.(8) Has the memory function, even if the long-term shutdown loss of power, memory zeroing, calibration, standard sample and a reference sample values of the useful information is not lost.(9) Equipped with a standard RS232 interface, can communicate with computer software.

  • Lightning Mast Protection Systems

    LBA Group, Inc

    Area protection for fixed and portable assets - LBA Technology offer the PLP-30 family of fixed and portable lightning protection masts and kits. Based on a light weight, rugged 30 foot (9.1m) aluminum mast; various mounting styles, grounding systems, and UL Listed air terminals are offered. PLP-30 lightning mast components are under 9 feet (2.7m) long for easy surface or air transport and rapid field installation.PLP-30 Lightning Masts are recommended for a wide range of lightning protection applications where it is impossible or undesirable to attach conventional lightning terminals. Other models in the series share the same attributes and differ only in height and weight.PLP- 30 Lightning Masts provide a cone of protection within which lightning charges are diverted to the mast and grounded instead of to the protected object. Multiple PLP-30 masts may be used to protect extended areas. Protected areas may be determined by use of the widely accepted "rolling sphere" concept. For example, a single PLP-30 mast will protect 8 foot (2.4 m) high portable buildings wholly within a 40 foot (12.2 m) radius. An array of five PLP-30 masts will protect a camp of portable buildings within a 25,000 square foot (2350 m2) area. Consult LBA Technology for specific layouts you wish to protect.

  • Solar Tracking and Pyranometers

    Sutron Corporation

    The demand for energy increased rapidly over the past few decades and the trend is not expected to stop in the near future. These made researchers focus on renewable energy sources due to the environmental pollution caused by the existing conventional energy sources. Solar energy is one of the renewable energy that has been under deep research. Unfortunately, the main problem with this solar energy is lack of efficiency. Different positions of the sun throughout the day causing the static photovoltaic modules position inefficient. This paper discusses design of two-axis solar tracking system that considers multiple input parameters such as solar radiation and photovoltaic module output power for more efficient solar tracking algorithm. Some of solar tracking system conducted by other researchers uses various types of sensors including light dependent resistor (LDR) which is not efficient and can be easily affected by external environmental factors. Instead, this paper proposes the usage of pyranometer for measuring solar radiation as one of the input parameters. The solar tracking system controlled by PIC microcontroller that collects multiple input parameters and uses developed algorithm to control stepper motor movement for optimal photovoltaic module positioning. Solar Tracking System Utilizing Pyranometer for Optimal Photovoltaic Module Positioning (PDF Download Available). Available from: http://www.researchgate.net/publication/258106747_Solar_Tracking_System_Utilizing_Pyranometer_for_Optimal_Photovoltaic_Module_Positioning [accessed Dec 2, 2015].

  • Measure of Harmonics & Flickers

    Ofel Engineering Srl

    The formal definition of "flicker" is the "impression of instability of the visual sensation induced by a light stimulus whose luminance or spectral distribution fluctuates over time".The flicker can be considered as a symptom, deriving from the modulation of a load (the DUT) and the effects that this produces on its supply voltage. While the DUT is connected to a voltage source with a finite impedance, any modulation of the load will cause voltage fluctuations on the supply line.The EN 61000-3-3 standard focuses mainly on the limitation of such fluctuations and consequent flicker on low-voltage public power systems. Voltage variations produced by electrical and electronic equipment when tested under the specified conditions must not exceed 4%.

  • Radiation Testers

    MRC ltd.

    The Ranger is a small, handheld, digital survey meter which offers excellent sensitivity to low levels of alpha, beta, gamma, and x-rays. It has built in efficiencies for common isotopes to calculate activity in Bq and DPM. It has a backlit display and a count light and abeeper that sounds with each count detected. Other features include selectable alert levels, an adjustable timer, and an optional wipe test plate. Internal memory and the free Observer USB Software allow you to download your data, set computer alarms, and calibrate your instrument! The Bluetooth and Observer BLE enables saving, sharing,and automation of surveys and RadResponder compatibility

  • Photometer

    Optronik Line DSP 200 - Instrument Systems Optische Messtechnik GmbH

    DSP 200 offers outstanding sensitivity and stability for precise measurements even at very low illumination levels. The instrument meets, of course, all requirements of the newest standards, like EN 13032-1 and DIN 5032-7 (2017). A low-noise photo diode with V(lambda)-filtering and optimized electronics provides for a broad dynamic range from 0.1 mlx to 200 klx. At the same time the very high local resolution allows an accurate determination even of high gradients when measuring headlamps. Therefore, the DSP 200 is suitable for all automotive and traffic applications, as well as for flashlights and for measurements of all pulse width modulated light sources.

  • LED Test Programmable DC Electronic Load

    IT8912E Series - I-TECH Electronic Co., Ltd

    IT8900 series high accuracy LED specific testing electronic loads can simulate the real output of LED lights with different characteristics.Their specific circuit can realize CR-LED mode, adjustable frequency, duty ratio PWM dimming output port (frequency: 20Hz-2KHz), I-pp/I-max measurement function can test current ripple and start up surge current of LED constant flow source. Voltage and current testing speed can reach 50KHz. IT8900 series provides CR-LED / CC / CV + CC / CR /CW and other working modes, built-in USB / RS232 / GPIB communication interface. Widely used in LED driver power dimming test.

  • Digital Panel Meter

    VAW - Chang Shuan Electronics Co., Ltd.

    VAW DC Multifunction Power Meter provide high accuracy measurement, display and communication of DC voltage, Current, Power, Energy(import / export), and Run Hour. They are also building in 4 Relay outputs, 1 Analogue output, 1 Pulse output , 2External Control Inputs and 1 RS485(Modbus RTU Mode) interface with versatile functions such as remote I/O, alarm and communication for DC power applications like as solar, wind power system or portable electronic device consumption testing.For the power saving, VAW has built in an innovation timer to switch down the light and power of LED. It makes sense to build the meter in a green power system.

  • Digital Tire Pressure Gauge 230 PSI

    AstroAI ATG230 - AstroAI Corp.

    Green Backlit LCD display and flashlight for visibility in dimly light areas, easy-to-read digits help you easily measure your vehicle's tire pressureHeavy Duty Stainless Steel Made And RV/Truck Special Designed to maintain correct tire pressure, reduce tire wear and extend tire life; Digital display reading instantly and clearly being shown, no longer do the guesswork of analog gaugesBi-directional push-pull (Dual) head design; Nozzle easily forms a seal with the valve stem giving quick and accurate readings in 0.1 increments; 4 settings with longer range: 0-230 PSI / 0-16 Bar / 0-16 Kg/cm2 / 0-1585 Kpa