Showing recent results 1486 - 1500 of 1984 products found.
-
INFINITY-CLW ACLW2-USB - JFE Advantech Co., Ltd.
Infinity-CLW is an autonomously deployable data logger for long-term chlorophyll and turbidity measurements. The light sources (LEDs) of chlorophyll and turbidity sensors are highly stable, Minimizing the change over time. The instrument has a mechanical wiper that periodically sweeps to inhibit biological growth on the optical window. The turbidity sensor has a good correlation with SS (Suspended Solid) over the range. Infinity-CLW provides Highly accurate and long-term stable chlorophyll and turbidity data in oceans, rivers and freshwater.
-
Arga Controls
These relays contain an extra pair of output terminals which run analog, digital or bar meters. They also contain lights to indicate status. Meter Relay Modules may be used with any 0-1 mA analog or 0-2 VDC digital meter. Two or more meters may be driven by one module (or multiple monitoring can be accomplished using two or more modules for a single meter). The meter relay modules come with internal or ex- ternal signal conditioning.
-
OFL250 - Wuhan Sunma Technologies Co., Ltd.
SunmaTech series portable optical time domain reflectometry (OTDR) is the latest FTTx optical fiber cable-based test instrument. It has light weight, elegant appearance, small size, easiness of installation and maintenance, high-capacity built-in battery. It provides multiple built-in test wavelengths and optical testing functions like visual fault locator (VFL). As a new product specially designed for FFTx network testing, it provides site technicians with the highest performance and upgrade services.
-
SKZ111 - SKZ Industrial Co., Ltd
High-frequency paper moisture meter is the high-performance and digital meter for testing moisture, which is firstly introduced to China from foreign countries. The meter uses high-frequency principle. It integrates sensor and mainframe with figure display and has six stalls to test the moisture of various papers, cardboard, corrugated paper and carton. The meter has many advantages, such as large testing range, high accuracy, and small dimension, light and portable for spot testing. It is the ideal instrument in the production process.
-
C4000 / C8000 Product Family - optek-Danulat GmbH
The advanced modular design enables precision process monitoring and control with multiple sensors. Photometric converter is designed for optek ultraviolet (UV), visible (VIS), near-infrared (NIR) absorption based and scattered light based sensors. Sensors: AF16-N / TF16-N Turbidity Sensors, AF16-F / AF26 Color Sensors, AF45 / AF46 UV Sensors, ASD12-N / ASD19-N Probe Sensors, ASD25-N / ASD25-BT-N Probe Sensors. AS16 / AS56 Probe Sensors. Conductivity Sensor.
-
GAO Tek Inc.
GAOTek’s polarimeters measure the rotation of polarized light as it goes through an optically active solvent by using the polarimetric technique. To calculate the value of the solution concentrations, it must determine the measured rotation. Our instruments are also ideal for various applications such as chemical, food, beverage, and medical fields. GAOTek’s high-performance polarimeters are reliable and inexpensive equipment that provide an accurate measurement for easier inspection or testing. They are compact, easy to carry and portable to allow the user to work in complex conditions and on-site.
-
GAO Tek Inc.
GAOTek’s polarimeters measure the rotation of polarized light as it goes through an optically active solvent by using the polarimetric technique. To calculate the value of the solution concentrations, it must determine the measured rotation. Our instruments are also ideal for various applications such as chemical, food, beverage, and medical fields. GAOTek’s high-performance polarimeters are reliable and inexpensive equipment that provide an accurate measurement for easier inspection or testing. They are compact, easy to carry and portable to allow the user to work in complex conditions and on-site.
-
RKI Instruments, Inc.
aturesMonitor up to 6 gases2 smart slots that auto recognize PID, IR, and super toxic sensorsLibrary of over 600 VOCsPPM Leak Check modeMan-down alarmPanic alarmAuto display rotationLED Light sourceInternal sample pumpGlove friendly buttonsLight weight, small, rugged IP-67 designInterchangeable battery packs Li-ion / alkalineOperates up to 14 hours on Li-ion battery pack, fully recharges in 3 hoursField replaceable sensors, batteries, filters & pumpCurrent time display
-
QL01 Family - Hobbs ElectroOptics
The QL01-A/B are the first of a family of advanced photoreceivers from Hobbs ElectroOptics. Offering a previously unattainable combination of low noise and high speed, they allow measurements at the quantum (shot noise) sensitivity limit in a full 1 MHz bandwidth at light levels from as low as 35 nanowatts up to a few microwatts. The QL01s are all-new designs based on expertise gained through our own research and from designing dozens of advanced instruments for our consulting clients.
-
FBR4102PB - Macom Technology Solutions Inc.
The MACOM FBR4102PB is a 4 x 25G/28G 1310nm LAN-WDM Receiver Optical Sub-Assembly (ROSA), consisting of an Optical Demultiplexer to separate 4 wavelength light signals, high-sensitivity highly-reliable PIN photodiodes and high performance low power consumption MACOM quad Trans-Impedance Amplifier (TIA). The ROSA is assembled in a hermetic-sealed package with an LC receptacle for optical input and two flex circuits for DC/RF electrical connections. The ROSA is best suitable for CFP, CFP2, CFP4 and QSFP28 applications.
-
T3SA Series - Teledyne LeCroy
Teledyne Test Tools new T3SA3000 family of Spectrum Analyzers offers a frequency range of 9 KHz to either 2.1/3.2 GHz alongside many impressive features. With their light weight, small form factor, and user friendly interface, these Spectrum Analyzers take powerful and reliable automatic measurements that are presented on a large, bright, easy to read touch screen display. Typical uses for the T3SA3000 series are research and development, education, production, maintenance, and pre-compliance testing.
-
VA8020 series > - Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
●Measure: m/s, km/h, fpm, mph, kts, Beaufort scale, °C, °F●Resolution: 0.1 m/s, 1 fpm, 0.1℃, 0.1°F●Range: 0.4～20 m/s, 80～4000 fpm●Sample Rate: 0.5sec●Operating temperature: -10~50℃, 14~122°F●Special function: Auto power off; Data hold; MAX and MIN; Back light●Dimension:157 x 60 x 30mm●Weight: 180g
-
Is-Instruments
Raman is a spectroscopic technique that uses laser light to interact with molecular excitations and determine what a substance or element is composed of. It relies upon the inelastic scattering of photons which produces a weak signal, making the collection of information challenging particularly when the substance to be measured is at distance or can only be given short exposure times. Our Raman spectrometers are particularly effective at making Raman measurements due to their configuration which delivers a higher throughput/etendue than standard instruments.
-
ZET 7152-N-VER.1 - ZETLAB Company
Digital accelerometer ZET 7152-N-VER.1 has a compact triaxial sensing element; it is purposed to measure linear acceleration and vibration acceleration variable component in three mutually perpendicular planes. Light weight of sensing element (only 1.5 g) considerably decreases self-mass load effect, and compact dimensions (8.5×8.5×8.5 mm) allow using ZET 7152-N-VER.1 digital accelerometer to measure vibration in small work-area systems.
-
InfraCal 2 TRANS-SP - Spectro Scientific
The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04 and Freon-113, hydrocarbon-free grade of perchloroethylene, AK-225, S-316 or other spectroscopic infrared transparent solvent as the extracting solvent. Since the extract is deposited into a 10 mm quartz cuvette cell with Teflon stopper, light end volatile components are retained for measurement. Accurate down to 0.1 ppm.
