Filter Results By:

Products

Applications

Manufacturers

Level

high or low along a bead it's a measure referenced.

See Also: Liquid Level, Signal Level Meters, Level Transmitters, Depot Level Test


Showing results: 2866 - 2880 of 3778 items found.

  • Power-off Circuit Board Testing

    Huntron® Trackers® - Huntron

    Adding diagnostic tools to enhance your circuit board test capabilities is an important part of any electronic repair environment.Huntron Tracker power-off circuit board test uses analog signature analysis to detect and isolate component faults on boards beyond power-on functional testing. By comparing Tracker signatures from a working circuit board to the signatures of a non-working board, you can troubleshoot down to the component level.

  • RF Test Benches

    FIME SAS

    FIME laboratory equipment qualified for RF testingValidate the analogue behaviour of RF devices with a single set of laboratory tools and services before seeking contactless Level 1 type approval or launching mass production. FIME RF test benches are built for RF testing of: EMV contactless cards and readers; ICAO e-passports and readers; ISO devices (PICC and PCD), HF and UHF RFID tags and readers.

  • Gas & Emissions Analyzer

    Si-CA 8500 - Sauermann Group

    Accurate, reliable, robust & fast, the Si-CA 8500 Combustion Analyzer is the most powerful and advanced portable emissions analyzer on the market. Complete portable tool for emissions level monitoring of boilers, engines, and other combustion equipment, this emissions monitoring device can boast as many as 9 gas sensors, detecting one of the widest spectra of gases: O2, CO, NO, NO2, SO2, CO2, CxHy, High CO, VOCs and H2S.

  • In-Situ Spectroscopic Ellipsometer for Real-Time Thin Film Monitoring

    UVISEL Plus In-Situ - HORIBA, Ltd.

    The UVISEL Plus in-situ spectroscopic ellipsometer can be easily mounted on process chambers (PECVD, MOCVD, sputter, evaporation, ALD, MBE) for the real-time control of thin film deposition or etch processes.The UVISEL Plus in-situ provides the unique combinations of very high speed, sensitivity, dynamic range and accuracy making the instrument able to control deposition / etch at the atomic layer thickness level, even for rapid processes.

  • Bus Analyzer / Exerciser

    VME850P2 - Silicon Control Inc.

    The VME850P2 analyzer is an optional plug on module for the VME850 analyzer that adds analyzer and exerciser functions to the VME850 analyzer for the P2 connector. This module allows the user to monitor and stimulate the A, C and D  rows of the 160 pin P2 connector. Although the VME850P2 analyzer is in a PMC form factor it is not compatible with the PMC protocols and signaling. The signaling levels on the P2 connector must be less then 5V in order to prevent damage of the analyzer.

  • Burn-In Test Fixtures

    IST Engineering, INC.

    Burn-in generally involves the extended operation of a product in a temperature-controlled environment. With possible humidity and supply voltage margining - the burn-in process can then be extended to include power stress (levels and on/off cycles) tests, high humidity environmental simulation as well as the classic "four corner test" of high voltage + high temperature, high voltage + low temperature, low voltage + high temperature and low voltage + low temperature.

  • Acoustic Microscope

    AMI D9650 - Nordson Corporation

    Specifically designed to serve as a general purpose tool for failure analysis, process development, material characterization and low volume production inspection, the capabilities of the D9650 are truly unmatched. Representing the latest in C-SAM acoustic micro imaging, the D9650 delivers the unrivaled accuracy and robustness that you would expect from Nordson Test & Inspection instruments, plus improved electronics and software that raises the performance level for laboratory acoustic microscopes.

  • Indoor Air Quality, Carbon Dioxide (CO2)

    Extech CO240 - Extech Instruments Corporation

    The CO240 measures Carbon Dioxide (CO2), Air Temperature and Humidity, as well as Dew Point and Wet Bulb calculations. The user settable high alarm with audible beeper is perfect for conducting a quick check of CO2 level to help adjust the environmental conditions in an enclosed area, such as a greenhouse or nursery, to insure optimal plant grown. Complete with six AAA batteries, USB cable, PC software and soft case.

  • Water Filler for Nickel-Cadmium Cells

    MasterFiller - JFM Engineering

    The MasterFiller is an instrument designed to deliver measured quantities of distilled water as required in the service of Aircraft Nickel-Cadmium batteries.· The MasterFiller consists of a microprocessor controlled pump with a level sensing probe, a keypad and display and an external 12VDC power supply (or optional battery).· The MasterFiller is part of a system comprising Intelligent Charger-Analyzers and Software for Battery Data Acquisition and Analysis, designed to improve the accuracy and efficiency of the process of testing batteries for airworthiness certification.

  • Two Port SAS?SATA Analyzer

    Sierra M122A - Teledyne LeCroy

    The Sierra M122A is Teledyne LeCroy’s two port SAS / SATA analyzer with special licensing to allow 6 Gb/s protocol capture. This multifunction platform is available with an integrated traffic generation option capable of host and device emulation. There is also a “Jammer” option for stress testing at the system and component level. This model of the Sierra M122A is configured for 6Gbps SAS & SATA protocol capture and can be field-upgraded to support 12Gb/s SAS testing.

  • Ultra Large Seismic Survey Tools

    MaxiWave® - Sercel Group

    MaxiWave® is the most cost effective digital multi-level downhole seismic array for very large sized downhole seismic surveys. With 100 digital 3-components levels, MaxiWave® benefits from the most advanced developments in terms of real time telemetry and mechanical reliability, that make the system the optimal solution to address today’s challenges for cost effective acquisitions with high volumes and high quality data.

  • Offline MPEG Analyzer

    MSight - MiraVid Inc.

    Instantly jump to any stream location with fast seeking which makes navigation simple and easy. MSight Analyzer will jump to the exact location of any error identified in a compliance test to allow full inspection of all the stream data at that location. Complete coverage with support for VC-1, H.264/AVC, MPEG-4 part 2, MPEG-2, MPEG-1, and system level (program and transport stream analyzer features) in a single tool.

  • Regulated DC Power Supply

    PDS-A Series Hybrid - Texio Technology Corp.

    As compared with dropper-method DC power supplies, the unique switching and dropper circuit systems bring low output noise at same level, light weight less than half, and compact body. PDS-A power supply corresponds to EU RoHS regulation in consideration of environment. GP-IB, RS-232C, USB and LAN optional control boards are available and users are able to download API and drivers software from TEXIO web-site.

  • Advanced Diagnostics for ScanExpress™ JET JTAG Embedded Test Solutions

    ScanExpress JET Advanced Solutions - Corelis, Inc.

    ScanExpress JET advanced diagnostics add additional diagnostic resolution with fully automated analysis translating functional test results to down to the net and pin level, even with BGA packages.The seamless integration with ScanExpress JET and ScanExpress Runner as well as the ability to output ScanExpress Viewer fault reports for PCB visualization make ScanExpress JET Advanced Diagnostics a must-have tool for any JTAG test system.

  • 94dB Sound Calibrator - 1kHz Professional Calibrator for 0.5" or 1.0" Microphones

    Extech 407744 - Extech Instruments Corporation

    This 1kHz, 94dB professional sound calibrator for 0.5" or 1.0" microphones calibrates and verifies sound level meter operation. Battery test position with battery status LED indicates if battery is good. Durable die-cast aluminum housing generates a 1kHz sine wave at 94dB to an accuracy of 5% (frequency) and ±0.5dB (94dB). Meets IEC standard 60942 1997-11. Complete with two 9V batteries, carrying case, and screwdriver.

Get Help