Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Modular Instruments, Instrumentation Amplifiers


Showing product results. 4351 - 4365 of 5052 products found.

  • TI HDC1080 Humidity and Temperature Sensor Breakout Board

    SEN-37001 - Playing With Fusion Inc

    Breakout board for the Texas Instruments HDC1080. This sensor is an extremely accurate temperature and humidity sensing device, with +/-0.2C temperature and +/-2% humidity accuracy typical. These specs far exceed the accuracy of ICs that came before it, including the HTU2x and SHT2x series, and improves upon the success of the HDC1050. In addition, the HDC1080 has a wide input voltage range of 3V-5V and includes temperature and airflow cutouts as recommended for the best operation. Finally, in the case of environmental changes that could cause light condensation, the HDC1080 has a built-in heater to burn off any condensate. Example code (Arduino platform) is available below.

  • Total Sulfur Analyzer

    Model T108 - Teledyne Advanced Pollution Instrumentation

    The Model T108 Total Sulfur analyzer is designed to measure mixed sulfur impurities, collectively referred to as Total Sulfides, in air or carbon dioxide gas. Since there is no scrubber in the system, the instrument reading is the sum of the oxidized sulfur compounds and SO2.The Model T108 consists of a modified Model T100 SO2 analyzer with special software and a Model 501TS high temperature thermal oxidizer. Sulfur compounds are heated as they pass through the converter and oxidized into SO2. When analyzing CO2, which generally contains no oxygen, approximately 6% O2 is added to the sample before entering the converter. This dilution is corrected in the calibration procedure.

  • Transformer Test Set

    CTMP 2012 - Blue Box Test Equipment

    The CTMP 2012 offers integrated instructions for easy familiarization and enhanced productivity. The instrument performs the classic voltage ratio test and displays the primary and secondary voltages and the angle between them (polarity). Two X1 - X2 excitation output voltage ranges, 0-200V and 0-1000V, facilitate accurate measurement of CT ratios to 100,000 to 5. Output voltage metering autoranges to a 0-20V scale to maintain accuracy on low ratio transformers. The H1-H2 input range for current transformer testing is 0-0.32V to allow high resolution with the typical one turn primary used to perform a CT ratio test.

  • Two-Channel Multimode Optical Attenuator

    N7766A - Keysight Technologies

    Optical attenuator instruments are used to flexibly control optical signal power levels in test setups. A primary application is determining optical receiver sensitivity by measuring the BER vs. input signal power. The N7766A and N7768A provide 2 or 4 attenuator channels respectively for multimode fiber setups and are available with either 50 m, 62.5 m or 80 m fiber ports. The output power is monitored, especially to allow accurate and stable power setting independent of the input power. Convenient offset parameters allow the set power to correspond to the signal after other optical components in the setup path.

  • Universal Pylon Tester

    MS 1121 - Meltronics Systemtech

    Portable test equipment to check the electrical functionalities of pylons by simulating various store types in aircraft. This system is able to simulate the functionalities of different PIBs (IB/MB/CF, OB & Laser). The system provides facility to test two Pylons in parallel. The tester provides aircraft specific AC &DC voltages and facility to inject discrete inputs for checking output(s) viz firing voltages, fusing voltages. The system provides four channels of RS422 and Two channels of 1553B communication. Portable unit with caster wheels with all required hardware, power supplies, instruments, connectors and laptop housed in it.

  • Vector Network Analyzers

    SolarWinds

    One of the most important measurement tasks in radio engineering is the analysis of electrical circuits. A network analyzer is an instrument that is designed to solve this problem with high accuracy and efficiency. The circuits that can be analyzed with network analyzers have a wide range of applications ranging from simple devices such as filters and amplifiers to complex modules used in communications satellites. PLANAR specializes in the development and production of vector network analyzers that combine the capabilities of scalar network analyzers that measure not only the amplitude components of the main characteristics of the system (gain, loss, standing wave ratio, etc.), but also allow measurements of the amplitude and phase characteristics of the system .

  • Vector Network Analyzers

    Planar, llc

    One of the most important measurement tasks in radio engineering is the analysis of electrical circuits. A network analyzer is an instrument that is designed to solve this problem with high accuracy and efficiency. The circuits that can be analyzed with network analyzers have a wide range of applications ranging from simple devices such as filters and amplifiers to complex modules used in communications satellites. PLANAR specializes in the development and production of vector network analyzers that combine the capabilities of scalar network analyzers that measure not only the amplitude components of the main characteristics of the system (gain, loss, standing wave ratio, etc.), but also allow measurements of the amplitude and phase characteristics of the system .

  • Viscometer

    LS - Chongqing Lushun Scientific & Technological Development Co., Ltd.

    This instrument is sophisticated. It adopts advanced mechanical design and manufacture techniques, and microprocessor controlling technologies, it can accurately collect test data; Take a blue background light, ultra-brighten LCD as its display, so it can display test data intuitively; Designed with a RS232 port, so it can print out test data through a printer, and it can communicate with a computer using the software attached. It is sensitive, reliable, beautiful and convenient to be operated. It is used to determine absolute viscosity of Newton liquids and apparent viscosity of non-Newton liquids. It can be widely used for determining viscosity of grease, paint, plastic, medicine, dope, adhesive, and washing solvents, etc.

  • VXI 12-Channel Digital-To-Analog

    Model VXI 65DA2-55 - North Atlantic Industries

    NAI’s 65DA2-55 is a 12-channel Digital-to-Analog Instrument on a VXI board. This single-slot, message-based board provides twelve independent, single-ended, 16-bit, digital-to-analog (D/A) channels.The board features a motherboard configuration that provides three D/A modules on a single daughterboard card. Each module can each handle four channels. Each D/A is guaranteed to be monotonic (16-bits) over the full temperature range. Each output delivers 60 mA for a total of 720 mA and any single output can deliver 410 mA. A direct replacement for the 5410C-55-3, the 65DA2-55 is ideally suited for defense, industrial, and commercial applications.

  • 3D Scanner

    Artec Space Spider - Artec Europe S. a. r. l.

    A new and enhanced precision instrument for CAD users and engineers, Artec Space Spider is a high-resolution 3D scanner based on blue light technology. It is perfect for capturing small objects or intricate details of large industrial objects in high resolution, with steadfast accuracy and brilliant color. The scanner’s ability to render complex geometry, sharp edges and thin ribs sets our technology apart. It is an ideal industrial 3D scanner for high resolution capturing of objects such as molding parts, PCBs, keys, coins or even a human ear, followed by the export of the final 3D model to CAD software.

  • 5 in 1 Testlab

    Model 3744 - Aplab Limited

    - Low Cost Solutions to Diverse Test and Measuring Requirements in the Laboratory.- Comprises of Several Instruments in One Package Dual Trace Oscilloscope, Component Tester/Comparator, Triple Output DC Power Source, Frequency Counter and Function Generator.- Oscilloscope with dc to 30MHz Bandwidth and 1 mv/div Sensitivity on Both Channels.- 140mm Rectangular CRT and 8 x 10 cm. Display with Internal Graticule- 40ns/div to 0.2s/div Time Base.- Z Modulation (TTL Level).- X-Y Operation.- TV Triggering Frame (V) & Line (H).- LINE Trigger.- Component Tester / Comparator for Quick Evaluation of Component Characteristics.

  • Earth Resistance Tester

    Weshine Electric Manufacturing Co., Ltd

    specially designed and manufactured for the field measurement of ground resistance, adopts digital and micro-processing technology, 3 wire or 2 wire method to measure ground resistance, with unique calibration function for wire resistance, anti-interference ability and environmental adaptability, to ensure the long-term measurement of high precision, high stability and reliability; The instrument out shell adopts waterproof protection case, anti-collision, anti-fall, waterproof (protection grade IP65),which is strong, safe and durable, the instrument is also equipped with large capacity rechargeable lithium battery pack, especially suitable for outdoor construction site to use.

  • Up to 26.5 GHz PXI Vector Signal Analyzer

    PXIe-5668 / 783156-01 - NI

    Up to 26.5 GHz PXI Vector Signal Analyzer - The PXIe‑5668 offers wide bandwidth with high-performance measurement performance and speed. It meets the challenging requirements of applications such as wireless communications, radio frequency integrated circuit characterization, RADAR … test, and spectrum monitoring and signal intelligence. With its implementation as a PXI instrument, the PXIe‑5668 also features the fast measurement speed required for high-volume manufacturing test, and multi-instrument synchronization capabilities for phase-coherent MIMO test. You can use the optionally included PXIe-5698 preamplifier to improve dynamic range and sensitivity near the instrument noise floor.

  • Power Transformer Automatic Test Device

    XD71 - Hangzhou Xihu Electronic Institute

    The device is used for power transformer power outage routine test items to do automated testing.Which is characterized by dielectric loss, insulation resistance, DC resistance, tap-changer switching characteristics, short circuit impedance and variable ratio of six test items are concentrated in an instrument,so that the instrument function, test power and test lead height fusion.Field test, just start wiring once, at the end of unplugging wiring once,the middle process by the test personnel in the computer terminal to send command control,the test system automatically completes all or part of the above test items.

  • Up to 26.5 GHz PXI Vector Signal Analyzer

    PXIe-5668 / 783156-03 - NI

    Up to 26.5 GHz PXI Vector Signal Analyzer - The PXIe‑5668 offers wide bandwidth with high-performance measurement performance and speed. It meets the challenging requirements of applications such as wireless communications, radio frequency integrated circuit characterization, RADAR … test, and spectrum monitoring and signal intelligence. With its implementation as a PXI instrument, the PXIe‑5668 also features the fast measurement speed required for high-volume manufacturing test, and multi-instrument synchronization capabilities for phase-coherent MIMO test. You can use the optionally included PXIe-5698 preamplifier to improve dynamic range and sensitivity near the instrument noise floor.

Get Help