Showing recent results 3871 - 3885 of 4234 products found.
-
1100C - CH Instruments, Inc.
The Model 1100B series power potentiostat/galvanostat is designed for electrochemical applications that require relatively large current and high compliance voltage, such as battery studies, corrosion, electrolysis, and electroplating. The current range is 2 A, and the compliance voltage is 25 V. The instrument contains a high speed digital function generator, a fast data acquisition system, filters for current signals, iR compensation circuitry, a potentiostat, and a galvanostat (Model 1140B). The potential control range is 10 V.
-
JT 2139 - JTAG Technologies Inc.
The JT 2139 is a TAP signal isolation module designed for use in combinational test systems that utilise multiple instrument interfaces. To avoid parasitic capacitance effects and/or unwanted ground loops the JT 2139 can be used to completely galvanically isolate any JTAG Technologies boundary-scan controller from the remainder of the instrumentation system. JT 2139 isolators are a standard component of the JTAG Technologies ‘Symphony’ systems that integrate boundary-scan with In-Circuits Testers etc..
-
2000 Series - Daytronic Corporation
Daytronic has four product families, the 2000 Series, the 3000 Series, the 3500 Series and the 4000 Series, designed to serve as Signal Conditioners and Controllers. Completely stand-alone in nature, these units can provide a low-noise system front-end, autonomous application control, operator display interfacing, remote data acquisition and single or networked operation. Each offering specific, unique characteristics, these high-quality and high-accuracy single channel instruments can accommodate virtually any application requirement
-
WS6-1000XMES-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS6-1000XME-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS5-540XMS-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS5-540XM-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS6-200XMS-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS6-1000XMS-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS6-500XM-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS6-DIFF-1000XMS-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
WS6-500XMS-W5 - TEAM SOLUTIONS, INC.
TiePie engineering has introduced the WiFiScope series oscilloscopes. The new range WiFi oscilloscopes can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the WiFiScope the possibility to perform fully wireless measurements. Measurements can then be performed completely galvanically isolated, and over long distances. This wireless PC-based data acquisition instrument offers the user more possibilities for measurement applications.
-
PVA-3000 - Sifos Technologies, Inc.
Sifos Technologies offers the PhyView Analyzer PVA-3000 multi-slot chassis supporting the highly innovative and fully automated 10/100/1000 PHY Performance Test Suite covering transmitter, receiver, and auto-neg behaviors of any 10/100/1000Base-T interface. Alternative to Standard Ethernet Compliance Testing with Innovative, Cost-Effective, Plug’n Play Verification of Ethernet 10/100/1000 Base-T Interfaces. Unmatched Automation and Simplicity.Connects up to 24 10/100/1000Base-T ports and provides access to the PHY Performance Test Suite supporting one-click, fully automated transmitter, receiver, and, auto-neg testing.Key Features• Comprehensive Physical Layer Testing at the RJ-45 Interface• 100/1000Base-T Transmitter Testing WITHOUT Costly Scopes, Probes, Fixtures, and PHY Test Signals• Accelerated Receiver Testing with Versatile Physical Impairments including Insertion Loss, Alien Crosstalk, and Jitter• Basic 10/100/1000 Auto-Neg Evaluation• Faster and More Informative Alternative to Packet Testing• Unique and Innovative Metrologies including Tx Power, Power Spectral Distortion, SNR, Wideband Return Loss, Wideband Crosstalk• Combine with PowerSync Analyzer to Assess PSE Physical Layer Performance while Powering PD's Fully Certified Commercial Test Instrument, Extensively Documented
-
LSG-1200A - Lisun Electronics Inc.
The compact goniophotometer of LSG-1200A is used to measure the luminous intensity distribution curve, intensity data, spread angle and other parameters for Chip LED, LED Module, LED Spotlight and all other light which beam angle is no more than 180 degree. • Meets the requirements of IEC, CIE and LM-79 standards • Measures beam angle automatically: staple half intensity angle as well as 1/4 intensity angle, 3/4 intensity angle and 1/10 intensity angle which meets the special requirements. • Measured data is matched with international standard form (IES) and can be applied for lighting design by other lighting design software such as DiaLux • LSG-1200A has included a dark room, measures the maximum size of lamps: 180mm • Test range of luminosity: 0.1～30,000lx. Test accuracy of detector: Class 1 • The distance between the tested lamp and detector is 316mm/1000mm • Angle interval: Horizontal angle: 1°/5°/10°/15°/22.5°/30°/45°/90°, Vertical angle: 0.5°/2°/1.5° • The LSG-1200A horizontal automatic rotating on 0°~360° and Vertical automatic rotating on -90°~+90° • Test accuracy of angle: ±0.2° Work with the follow instruments as a System
-
Imbotec Group
Imbotec Group has been providing glossmeter Calibration, Repair and refurbishment services for over a decade. Our ability to meet the demanding schedules required by Tier 1 companies as well as leaders in the Coatings industry, has resulted in Imbotec Group being the Glossmeter Calibrator of choice for all emergent and "Critical Scheduling" maintenance requirements. Imbotec Group provides prompt and cost-effective calibration services to clients throughout North America. Reliability, thoroughness and the professionalism of our service department have been key factors in the growth of Imbotec Group Service. As we continue to expand, our focus will remain the same, by providing world-class calibration quality and personalized service to each of our clients.We are truly specialists in the calibration and servicing of gloss meters (glossmeters), moisture meters and psychrometers only. We will ensure that your equipment will operate to the international standards needed for the highest quality performance of your instrumentation.With calibration and service from Imbotec Group, you get the benefit of the most efficient and up-to-date instrument calibration and repair services, with the ability to tailor solutions for both small and multi-instrument large organizations. We provide a choice of calibration levels to suit your needs that is described further below.
