Filter Results By:





read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers

Showing recent results 3826 - 3840 of 4258 products found.

  • Target Boards

    C5000 - Spectrum Digital, Inc

    Selectable Core Voltages (1.2V, 1.4V, 1.6V)Power Capture for Core, I/O, and board current via onboard National Instruments USB power monitor interfaceCPU clock frequency measurementUser USB port via VC5509AEmbedded USB JTAG controller with plug and play, USB cable includedTLV320AIC23B codec8 Megabytes SDRAM512K bytes of on board Flash ROM3 expansion connectors (Memory Interface, Peripheral Interface, and Host Port Interface)On board IEEE 1149.1 JTAG connection for optional emulator debugFour 3.5 mm. audio jacks (microphone, line-in, speaker, line-out)4 user definable LEDs4 position dip switch, user definable+5 Volt operation only, power supply includedSize: 8.25" x 4.5" (210 x 115 mm), 0.062" thick, 6 layersCompatible with Spectrum Digital's DSK Wire Wrap Prototype CardRoHS Compliant

  • UHF Arbitrary Waveform Generator

    Zurich Instruments AG

    The UHF Arbitrary Waveform Generator (AWG) integrates signal generation and detection in a single instrument, providing a complete solution for pulsed measurement protocols. Its state-of-the-art programming concept offers a quick route to custom signals on the two 600 MHz output channels with 14 bit vertical resolution. The available detection schemes include multiple high-speed demodulators, pulse counters, and a digitizer for time domain analysis. Sequence branching based on internal measurement results enables feed-forward protocols at unparalleled speeds, making it suitable for quantum error correction. The UHF AWG''s modulation features ensure phase coherence for demanding measurement environments, such as quantum computing, mixed-signal device testing, NMR spectroscopy and more. The entire functionality is conveniently integrated into the LabOne software enabling intuitive Signal Composition and platform-independent control.

  • USB Oscilloscope

    Handyscope HS6 DIFF - TiePie engineering

    This powerful USB 3.0 super speed oscilloscope combines fast sampling up to 1 GS/s with high resolutions of 12, 14 and 16 bit and a large memory of 64 MSamples on all four channels. The oscilloscope supports continuous streaming measurements up to 200 MS/s and can be synchronized with other oscilloscopes using the CMI interface to form a multi channel combined instrument with synchronized timebase. The CMI interface is available by default on the Handyscope HS6 DIFF. Optionally, the Handyscope HS6 DIFF can be delivered with SureConnect connection test and resistance measurement on each channel. Also, the Handyscope HS6 DIFF can be delivered with SafeGround option. With SafeGround you can switch the differential inputs of the Handyscope HS6 DIFF into single ended inputs with ground protection. It allows to make measurements using standard attenuating probes and protects the scope when a short circuit to ground is created.

  • ZYGO 3D Optical Profiler

    Zygo Corporation

    ZYGO's 3D Optical Profiler instruments enable precise, quantitative, ISO-compliant, non-contact surface measurement and characterization of micro- and nano-scale surface features, capturing up to two million data points in just seconds. Choosing the right optical profiler system depends on your application's requirements, including speed, precision, vertical range, automation, and flexibility.The ZeGage Plus optical profiler expands on the capabilities of the ZeGage profiler with higher precision, faster measurement speed, and an increased range of measurable surfaces – while preserving its ease of use, vibration insensitivity, and small footprint. The ZeGage Plus profiler can measure a wider variety of surfaces – ranging from very rough to super smooth, with sub-nanometer precision, independent of field of view. Surface finishes may include ground, honed, lapped, polished, and super-polished on materials such as glass, ceramic, and metal.

  • Microplate Reader

    EKKO - Uniscan Instruments Ltd

    The EKKO™ CD microplate reader is the first well plate reader designed for circular dichroism measurements. It introduces a new fast and economic tool to meet today’s advanced pharmacopeia requirements. The EKKO™ operates like other well plate readers already on the market for absorbance and fluorescence. By eliminating the need to transfer samples to a cuvette, users significantly reduce the amount of time spent running large numbers of samples. The EKKO™ reads 96 well plates standard, and can accommodate 384 well plates as an option. The EKKO™can read 96 wells in less than two minutes. Thousands of measurements are possible per day, making circular dichroism a new high throughput and cost saving technique.The EKKO™ also saves lab space with a footprint one fourth of conventional CD instruments with autosamplers.

  • Battery Capacity Tester

    BLU-C Series - IBEKO Power AB

    BLU-C is the latest solution from DV Power for conducting a comprehensive battery capacity test. This universal instrument is applicable to any battery string, such as lead-acid, Li-Ion, Ni-Cd, and others, with voltages up to 800 V DC.BLU-C tester simplifies battery testing in multiple ways. The instrument provides monitoring of discharge parameters (graphically and numerically) in real-time on a 7-inch touch screen display. The instrument also enables measurement and monitoring of cell parameters (voltage/intercell voltage/temperature), which makes it a complete stand-alone discharge test system.The capacity tester is compatible with DV-B Win software. Because of that, the user can view detailed numerical and graphical presentations of key parameters, and create reports in various formats.The capacity test is performed in a user-friendly way according to battery testing standards: IEEE 450-2010, IEEE 1188-2005, IEEE 1106-2015, IEC 60896-11/22 and other.The battery tester enables setting the discharge current up to 300 A, with 0,1 A resolution. If higher currents are required, BLU-C units can be connected in parallel, or BXL additional load units can be used.The user can select one of three discharge modes: Constant current, Constant power, Constant resistance. Additionally, different battery duty cycles can be simulated using user-selectable discharge profiles.Testing can be carried out without disconnecting the battery from the equipment it supplies.

  • Dual Channel Transmitter

    9950 - Georg Fischer Signet

    The 9950 Transmitter is a two channel controller that supports two sensors of same or different types in one instrument. The sensor types supported by the 9950 are Signet Flow, pH/ORP, Conductivity/Resistivity, Salinity, Temperature, Pressure, Level, Dissolved Oxygen, and devices that transmit a 4 to 20 mA signal with the use of the 8058 iGo® Signal Converter.

  • Portable Digital Tesla Meter

    HT20 - Rinch Industrial Co.,Limited

    This instrument is convenient for operator to measure magneticinduction of DC magnetic field accurately. It is characterized by its wide range, clear display of LCD, and indefectible structure of sensor.A piece of 9V dry battery, which acts as its power supply, can servefor 4 hours continuously. Meanwhile, regulated power supply (enclosed) is available to 220VAC.

  • Temperature Meters

    PCE Instruments

    PCE Instruments’ temperature meter products are precise, portable, handheld devices ideal for professional, industrial, commercial and residential use. From contact temperature meter devices with probes to noncontact temperature meter devices using infrared or laser technology to measure temperature from a distance, PCE Instruments offers a wide range of accurate, reliable temperature meter products at an affordable price.Temperature is measured and recorded in many different applications. For example, HVAC technicians measure temperature to identify and address issues in heating or cooling systems, while quality control professionals in the food sector measure temperature to ensure the proper storage and preparation of everything from meat and produce to cheese and frozen foods. PCE Instruments carries a variety of temperature meter products, including temperature meter devices to measure different temperature ranges between -200 and 1767ºC / -328 ... 3212ºF; temperature meter devices that can indicate temperature in °C (Celsius), °K (Kelvin) and °F (Fahrenheit); and temperature meter devices that are water resistant. In addition, a number of thermal elements and type-K sensors are available for different temperature meter products.Each temperature meter comes factory calibrated to ensure accurate measurement. ISO-certified calibration, performed by one of our first-class calibration laboratory partners, may be obtained on most temperature meter models for an additional fee.A temperature meter is an instrument used to measure the temperature of beings or things. The most widely recognized temperature meter is a mercury thermometer used to measure the temperature of people. These thermometers consist of a graduated glass capillary with a pool of mercury in one end. However, there are many different types of temperature meters, such as digital thermometers that take temperature measurements on contact with an object or infrared temperature meters that take measurements at distance, without contact.

  • Power Analyzer

    HMC8015 - Rohde & Schwarz GmbH & Co. KG

    The R&S®HMC8015 Power analyzer is a compact tester for AC/DC load and standby current characterization that enables measurements without additional tools such as a computer or remote infrastructure. In addition to a numerical and graphical display with 26 key parameters, the instrument delivers performance and compliance protocols in line with IEC 62301, EN 50564 and EN 61000-3-2.

  • Full Function Electrical Safety Analyer

    MULTI-PRO 2000 - Netech Corp.

    The MULTI-PRO 2000, Electrical Safety Tester is a micro-processor based, full function electrical safety analyzer with a built-in 12 lead ECG Simulator. The combination instrument is designed to test the electrical safety of all types of medical equipment by hospital and field service biomedical technicians. In addition, the built-in ECG Simulator allows performance testing of ECG equipment.

  • Electron Probe Microanalyzer

    EPMA-8050G - Shimadzu Corp.

    This instrument is equipped with a cutting-edge FE electron optical system, which provides unprecedented spatial resolution under all beam current conditions, from SEM observation conditions up to 1 μA order. Integration with high performance X-ray spectrometers that Shimadzu has fostered through the company's traditions achieves the ultimate advance in analysis performance.

  • High Current Winding Resistance Meter

    SG5002\SG5003\SG5008 \SG5009 - Shanghai Jiuzhi Electric Co., Ltd.

    The SG5002 \ SG5003 \ SG5008 \ SG5009 high current resistance meters are special designed for high performance measurement of high inductance, low value resistances such as transformer windings, motors, breakers, switchgear etc. Unlike normal resistance meters these instruments have a built-in high-speed discharge circuits for safe discharge of the stored energy in a measured inductance.

  • Frequency Counter

    Tektronix, Inc.

    The Tektronix FCA Series frequency counter / timer / analyzer packs the functionality of a frequency counter, frequency meter and timer into one feature-rich instrument. With unprecedented resolution, you can capture very small frequency and time changes. Tektronix frequency counters and timers offer comprehensive analysis modes, including measurement statistics, histograms, and trend plots.

  • NI TestStand Development Services

    Simplicity AI Ltd

    Simplicity AI have a high degree of ATE software development expertise using NI TestStand, in industry areas such as aerospace, defense and telecoms. With Certified TestStand Architects and Certified TestStand Developers on the engineering team, and holding National Instruments Alliance Partner status, Simplicity AI have the knowledge and experience to deliver advanced test software solutions.