Filter Results By:





read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers

Showing recent results 3691 - 3705 of 4259 products found.

  • Optic Fiber Identifier

    ST-3306 - Wuhan Sunma Technologies Co., Ltd.

    is an essential installation and maintenance instrument. By inserting the fiber into its adapter head, it can identify SM optical fibers without any damage by detecting the optical signals being transmitted through them so as to avoid the opening of the fiber at the splice point for identification and thus avoids the interruption of the service.In the presence of traffic, the intermittently audible tone is activated.The 3306A optical fiber identifier also allows relative core power display and identification of the 270Hz,1kHz and 2kHz frequencies. When they are used to detect the frequency, the continuously audible tone is activated.There are four types of adapter heads available: ?.25, ?.9, ?.0 and ?.0. The 3306A optical fiber identifier is powered by a 9V alkaline battery.

  • Portable optical DO meter

    ARO-PR - JFE Advantech Co., Ltd.

    The Portable optical DO meter makes use of the fast-response optical DO sensor RINKO, maintaining its high-speed response performance (99% response < 7sec). The meter probe is equipped with a temperature sensor close to the sensing foil, and the measurements are made by simply inserting the probe into a DO sample bottle (the calibration is carried out using the National Metrology Institute of Japan (NMIJ) certified traceable gases standards). Differently from galvanic electrode sensors, the instrument does not require water sample stirring or fixing reagents, since there is no oxygen consumption. Thus, the required time to estimate dissolved oxygen is considerably reduced. The display unit shows the output instantaneously, and you can check the measured values in real time.

  • PXI Analog Output Module

    PXI-6723 / 778998-01 - NI

    13-Bit, 32-Channel, 800 kS/s PXI Analog Output Module—The PXI‑6723 delivers low-cost, high-density analog outputs to meet a wide range of applications, such as stimulus-response, signal simulation, waveform generation, and actuator stimulation. In addition, the device provides eight 5 V TTL/CMOS digital I/O lines; two 24‑bit, 20 MHz counter/timers; and digital triggering and external clocking capabilities. The PXI‑6723 can replace several kinds of instruments, including stand-alone proportional integral derivative (PID) controllers, low-speed arbitrary waveform generators, and function generators. You can control each data point for each channel to define common waveforms, such as square, sine, or sawtooth, as well as complex waveforms.

  • Solid State Pulse Amplifier

    S31-500-900P - Instruments for Industry

    Instruments for Industry, S31-500-900P Solid State amplifier is state-of-the-art and provides outstanding RF performance. The S31-500-900P amplifier operates over the frequency range from 0.8 – 3.1 GHz and supplies 500 watts CW / 900 watts Pulse offering all the control and communication features needed for today's automated test systems. From the ground up, the S31-500-900P amplifier is built to withstand rugged handling, whether it's being shipped to you or hauled from site to site. They feature heavy-duty aluminum chassis construction with a modular approach for easy access and service. The S31-500-900P is perfectly suited for automotive testing as well as general purpose industrial applications.

  • Stand-alone Software

    N4391AU - Keysight Technologies

    The analysis software from the N4391A optical modulation analyzer can be used on your PC without any instrumentation. It offers all the analysis capabilities of the N4391A including its advanced signal processing algorithms for complex modulated optical signals. Use this software to process and analyze raw data stored as .sdf, .mat or .csv files from N4391A or N4392A measurements. This capability allows you to work with the data as if you would work directly in front of the instrument. It is an excellent tool for developing your own signal processing algorithms and testing them off-line, together with your MATLAB compiler. In addition, this software is an effective tool for learning basic and advanced concepts of complex optical modulation, based on stored files.

  • Synthesizers

    8300 family - Pronghorn Solutions

    The 8300M Systems Module Synthesizer is part of Pronghorn’s 8300 family of microwave synthesizers which cover the frequency range of 10 MHz to 18 GHz. The 8300M is the world’s smallest and lightest instrument grade 18 GHz synthesizer. In addition to the Systems Module solution, the family includes a Bench Top model (8300B) and a Handheld model (8300H). Any programs written to control the Hand Held or Bench Top models are 100% compatible with the System Module which has been designed to be used in automated manufacturing test systems or in embedded systems that need a computer controlled broad band synthesizer. The 8300 series can be ordered with an upper frequency of 6 GHz, 9 GHz, or 18 GHz.

  • Tungsten Halogen Lamp

    Heraeus Noblelight GmbH

    Heraeus has designed a series of tungsten halogen lamps (TH) specifically for use in analytical applications. Special quartz envelopes enable high transmission below 380 nm and the position of the tungsten filament is closely controlled through precise alignment. The lamps offer high colour temperature, luminous efficacy and long life. TH lamps are filled with a halogen gas mixture specific to their final application and range from 5 W – 200 W, with typical lifetimes of more than 2,000 hours. Lamps can be designed and built according to OEMs specific requirements, such as colour temperature, voltage, wattage and mechanical tolerances. Each lamp fit for purpose, ready finished to drop into the instrument. No pre-selection required.

  • VXI

    Data Patterns Pvt. Ltd.

    VXI stands for VME eXtensions for Instrumentation. It is an open standard first developed by five leading Test and Measurement companies in 1987 to standardise a backplane capable of developing open, interchangeable instrument modules that could be used to build Automatic Test Equipment (ATE).Data Patterns designs and markets a wide range of VXI modules, some of which are listed below. Due to the use of the latest technologies, Data Patterns VXI modules offer the highest I/O density available in the industry today.Further enhancements of functional capabilities are achieved by the use of VXI IP carriers and VXI M Module carriers. This extends standard functions available from Data Patterns in these mezzanine architectures to the VXI platform.

  • Waveform Generation Toolbox for Wideband Signal Simulation

    N7509A - Keysight Technologies

    The Waveform Generation Tool provides a simplified interface for baseband modulation of Keysight's wide bandwidth signal simulation solutions, for signals with up to 1 GHz RF bandwidth. Even the most complex signals are defined and implemented easily through the software interface. Signals can be defined through basic parameter entry or from files created in MATLAB or other engineering environments. For each selection in the main menu, a subsequent screen appears, enabling the user to enter the parameters required to define the waveform and invoke the built-in calibration routines. A display on each sub-panel shows the ideal frequency domain waveform calculated from entered parameters. A simulation mode is provided to enable development and operation without connection to the instrument hardware.

  • Circuit Breaker Analyzers & Timers

    CAT Handheld Series - IBEKO Power AB

    When it’s not practical to use conventional robust circuit breaker analyzers, a handheld circuit breaker analyzer and timer may come handy. DV Power has developed a unique CAT Handheld series. It is specially designed for testing of circuit breakers with one break per phase. Their compact and ergonomic design can provide a wide range of features and reliable operations in low, medium and high-voltage substations or in industrial environments.CAT Handheld series consists of two models, CAT-P and CAT-H. Both of them have a large (5,7 in) colored touch screen display. Because of that, test results are visible in dark places as well as in bright sunlight.Powerful internal Li-Ion battery of the instruments can last up to 8 hours of testing without recharging.CAT Handheld series records:main contacts operating times,contact synchronization,sequence time,a resistance of pre-insertion resistors,open and close coil currents,main contacts bounce time,auxiliary contact time,DC Voltage.Multiple operations, such as Open-Close and Open-Close-Open, can be initiated by using a predefined delay time or by triggering signal from current clamps connected to circuit breaker coil.CAT-H is capable of performing a coil control, while this feature is optional at CAT-P instrument. In contrast to CAT-H, CAT-P instrument can execute “First Trip” test.Both instruments display numerical and graphical results. Because of that, a user can easily overlay up to 4 records in the graphical form and make a quick on-site analysis of potential defects.A user can download test results to a PC via Bluetooth interface for more detailed analysis using DV Win software.

  • LCR Meter

    Hantek1832C/Hantek1833C - Qingdao Hantek Electronic Co., Ltd.

    Hantek1832C/Hantek1833C handheld LCR Meter is a portable handheld measuring instrument to measure the parameters of the component such as inductance, capacitance, resistance and so on.small volume, powered by 5V lithium battery, it can meet the requirements of desktop LCR application, and can also be applied to flow measurement and handheld measurement.

  • Digital AC Power Supply

    AS Series - Metrue Inc.

    The AS series AC power supply is a high accuracy, low distortion, and high stability AC power supply. It provides frequency adjustable pure sine waves and is suitable for the test of household appliances, lamps, computers, etc. It separates the output of the transformer so as to increase the stability of the instrument.

  • Network Analyzers

    Contrel Elettronica s.r.l. Company

    Complete plant monitoring. The network analyzers have been designed to combine maximum simplicity of operation with a wide choice of advanced functions. Measurements range from currents and voltages through energy consumption, harmonic components. Multifunction measuring instruments with basic energy quality analysis.

  • Digital Flow Meters

    FM-2500A/1500 - Ono Sokki

    High-precision fuel flow meters that support automobile energy conservation countermeasures. The global warming phenomenon is one of several global environmental conservation problems that need to be tackled, and the further reduction of fuel consumption is one of the important issues currently being addressed. Ono Sokki has been developing and supplying automotive-related measuring and control instruments for over the past half century, with effort of satisfying demands in the market and improving accuracy of instruments, especially for fuel consumption measurement, which could be an essential part of automotive tests. With selection of measurement module, the FM-2500A/1500 digital flow meter can ensure high accurate measurement in combination of flow detectors FP/FX/FZ series, according to testing purpose.

  • Handheld X-Ray Imager

    HBI-120 - Viken Detection

    Heuresis’ HBI-120 is a rugged, ergonomic, handheld backscatter x-ray instrument that enables users to quickly and cost-effectively find concealed explosives, narcotics and other contraband, even through 12- gauge (over 2 mm thick) steel — more than twice the thickness of typical motor-vehicle body panels — with none of the limitations of portable transmission x-ray systems. The HBI-120 weighs only 6.6 lbs. (3.0 kg) and images objects with a miniaturized, internal 120 keV x-ray generator that makes a raster-scanning pencil beam of x-rays to scan objects of interest. As the handheld HBI-120 is moved over the object, a 2- dimensional backscatter x-ray image of the object is displayed in real-time on HBI-120's high-resolution transflective LCD touchscreen and saved in the instrument’s memory.