Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers


Showing recent results 3466 - 3480 of 4238 products found.

  • Digital Iron Loss Tester

    VDW-2065 - Veer Electronics

    VEER make Digital Iron Loss Tester VDW-2065 is portable & easy to use instrument which is very useful to find Watt loss of electrical steel immediately. Internationally accepted standard method of testing is Epstein frame method but that method needs 30mm x 305 mm size & min. 250g weight of material. Stamping, Laminations can not be tested on Epstein Frame because of size. So, we have designed a direct reading type Single Sheet Tester called Digital Iron Loss Tester VDW-2065 which provides very fast testing of final products like Stamping, EI & other laminations etc...

  • Digital Thermometer

    Digital 500 II - Pyrometer Instrument Company

    The Pyrometer Digital 500 II digital thermometer is a rugged portable easy to read thermocouple pyrometer that utilizes interchangeable, reusable thermocouple tips for both surface and immersion applications. This digital thermometer pyrometer is ideal for temperature measurement using thermocouple thermometer K type thermocouples. Instrument temperature measurement accuracy to ± 1.0% of reading is achieved by employing an automatic internal cold end junction compensator to prevent temperature measurement errors due to ambient temperature variations. The Digital 500 thermocouple thermometer comes complete with a durable Lexan housing and is ready to use with a wide variety of optional rigid & flexible extension arms and thermocouples.

  • ENA Vector Network Analyzer

    E5061B - Keysight Technologies

    Select the best configuration for your test needs from a wide variety of test set options: 100 kHz to 1.5 GHz/ 3 GHz, 2-port, 50 or 75 ohm, transmission/reflection or S-parameter test setAddress a broad range of applications with the LF-RF option (Option 3L5/3L4/3L3): 5 Hz to 3 GHz, 2-port, 50 ohm, S-parameter test set, gain-phase test port, built-in DC bias sourceCombine network analysis and impedance analysis to customize your application in a single instrument (Option3L5/3L4/3L3 plus 005) Every spec verified, adjustments included Lock in support & peak performance from the start

  • Fluorescence/UV-VIS Spectrophotometer

    Vernier Software & Technology, LLC

    Our affordable Fluorescence/UV-VIS Spectrophotometer is designed specifically for upper-level chemistry courses. We've combined the functionality of a fluorometer with the power of a UV/VIS spectrophotometer to allow students to easily and accurately conduct numerous fluorescence experiments with compounds such as quinine sulfate, DAPI, GFP, and tryptophan. Exchangeable LEDs ensure you get the exact excitation wavelength needed for your experiment. To conduct emission spectra experiments simply attach the Vernier Spectrophotometer Optical Fiber. The Fluorescence/UV-VIS Spectrophotometer connects directly to a computer or LabQuest. Data can be collected and analyzed using our Logger Pro software, so there is no need to train students on yet another instrument software.

  • Fusion Splicer

    AV6471 - Radiasun International Group Ltd.

    AV6471 fusion splicer is a new designed fiber splicing equipment.The powerful funtcion and super low splicing loss make it be competent for construction of trunk line and FTTX: Because of the compact configuration and precise mechanism, it can adapt to execrable enviroment; The novel fiber imaging system make the image clearer and exquisiter; The real-time embeded OS provide friendly man-machine interface and abundant functions. The bulit-in large capacity Li-Ion battery can support long-time fieldwork.The embeded sensors measured temperature, humidity and air pressure supply closed-loop feedback control, so the instrument can adopt all kinds' atrocious circumstance and the consistency of splicing loss was improved.

  • Guardian Electrical Safety Analyzer

    19032 - Chroma Systems Solutions, Inc.

    Electrical safety testing is a major item in electrical product quality testing. All electrical products like adapters, SMPS, charges, house appliances, information technology products, and video products are required to undergo electrical safety testing. The 19032 series combines Hipot, Insulation Resistance (IR), Ground Bond (GB), Leakage Current (LC)/AC LC/DC LC and Dynamic Function Tests. Space savings can be up to 50% of production line space, through not purchasing multiple safety test instruments. The 19032 is able to increase the efficiency of electrical safety testing during manufacturing and reduce associated labor costs.

  • Handheld OTDR

    JW3302B - Shanghai Joinwit optoelectronic Tech,co.,Ltd

    JW3302B handheld OTDR is a new generation of intelligent optical measuring instrument designed for the optical fiber communication system testing by JOINWIT.This product is mainly used to measure the parameters of optical fibers and cables, such as length, loss, and connection quality, etc.; it can realize the accurate positioning of event points and fault points, and can be widely used in the construction, maintenance testing and emergency repair of the optical fiber communication systems as well as the research, production and production measurement of optical fibers and cables and so on. This product can provide you with the highest performance of solutions for installation and construction of fiber optic network construction and the subsequent fast and efficient maintenance and troubleshooting testing.

  • Harmonics & Flicker Analyser

    AC2000A - Laplace Instruments Ltd.

    The Laplace Harmonics and Flicker analyser provides the user with a complete system for testing product compliance with IEC61000-3-2 and IEC61000-3-3. Quick and easy to use, the built-in screen provides a clear pass/fail indication of compliance status, plus a full listing of results for each harmonic, in either tabular of bargraph format. The instrument is properly configured to cope with fluctuating harmonics. The Flicker mode provides proper measurement of short term and long term parameters, using algorithms specified in IEC61000-4-15. In addition, inrush current measurements can be automated such that the product under test can be automatically cycled on/off with user entered time profiles.

  • High Frequency RF and Microwave USB Programmable Signal Generators

    LMS Series - Vaunix Technology Corporation

    The Lab Brick LMS series of high frequency RF and microwave USB-compatible, synthesized signal generators cover a frequency range from 0.5 MHz - 20 GHz with low noise, fast 100-microsecond switching time, and fine 100 Hz frequency resolution. They require no additional DC supply voltage and offer advanced features such as phase-continuous linear-frequency sweeping, internal/external 10 MHz reference, and optional pulse modulation. GUI software can track and control several connected signal generators, simplifying multiple-signal test setups. Each device stores settings in internal memory, allowing it to power up in a specific instrument state.

  • Insulation Resistance Testers

    Shanghai Beihan Electronics Co., Ltd.

    *This is a variable high voltage insulation tester from 500V to 15kV in 500V steps.*The is menu driven and uses Dynamic Current Auto ranging technology.*It has a Bar-Graph which displays the voltage stressing the insulation while the test is in progress and the voltage decay during the automatic discharge of the tested circuit.*The top line of the display shows the elapsed time at the start of the test. Digital readout of the total time will remain displayed even after testing has ceased.*A 4-digit display (2000 counts) is showing the actual insulation resistance.*This instrument displays a voltage warning and sounds when AC or DC is present before injecting the test voltage.

  • LEON In-Circuit Test Systems

    Konrad Technologies GmbH

    The LEON Gen III Embedded PCB Tester combines classical analog in-circuit test (ICT) or manufacturing defect analysis (MDA) with additional functional test capabilities on a single PXI board. Multiple embedded testers can be configured in a single system for parallel test and high throughput.Highlights Combined test system ICT, FCT Digital test using JTAG In-system programming Open and flexible platform Small footprint Combines up to 6 instruments 2xPMU, 1xDVM, 1xHVCs 4xADC, 4x DAC High Speed Test Execution Parallel Test with max 16 modules Automated test sequencing Custom extension modules

  • Lightning And Steeping Impulse Testing Of HV Insulators

    FIVG - Fivestar HV Testing Equipment Co., Ltd.

    Impulse voltage test systems are used for impulse voltage testing of instrument transformers, power transformers, cables, gas-insulated switchgears (GIS), insulators, arresters, and other high-voltage devices. The test systems generate lightning impulse voltage (LI, 1.2/50 μs), chopping lightning impulse voltages (LIC, front time 1.2 μs, front, crest or tail chopped), and switching impulse voltage (SI, 250/2500 μs) in accordance with IEC 60060-1; as well as IEC 60076-3 for transformers, and IEC 62067, 60840 and 60502-1 for cables), etc. Also it can be used for steeping and oscillating impulse test by adding some extra equipment.

  • Long Light Source

    LM-A - Eddy Co.

    The long light source is compatible with the LM-101 or the LMC-20. The light is supplied with a 50 watt tungsten halogen convection cooled light source which provides suffcient energy for use with narrow band pass filters or monochronomators in the wave length range of .35 to 2.5 microns. The light beam is chopped at 200 hz by a quiet, vibration free, synchronous motor. The housing also contains a secondary LED light source and detector for synchronization of the amplifier, plus an electro-mechanical shutter to block the light output when the instrument is zeroed. An internal collimating lens produces a narrow beam (<1") so the LM-A can be used in bell-jar and large coating systems.

  • Portable Flaw Detector

    EPOCH 6LT - Olympus Corp.

    Portable and easy to use, the EPOCH 6LT flaw detector is an ergonomic, rugged instrument that delivers user comfort and more uptime. Weighs just 1.95 pounds (890 g) with a grip-oriented weight distribution for one-handed operation with minimal wrist fatigue. Rotary knob and simple button design make it easy to use, even when wearing gloves. Engineered to IP65/67 and drop tested. Clear, bright screen for readable A-scans in any light. The EPOCH 6LT flaw detector’s workflow is simple and straightforward. Despite the instrument’s small size, it has the features and functions to meet the requirements of nearly any conventional ultrasonic inspection application.

  • Pre-programmed autonomous water sampler

    AWS1000-2L / AWS1000-5L - JFE Advantech Co., Ltd.

    A compact and affordable water sampler system carrying up to 10 water sampling bottles of 2 L and/or 5 L was designed to be used in many different conditions, including in small vessels equipped with a crane (we recommend a crane that is able to lift at least 300 kg). The system has a built-in pressure sensor, but it was also designed to be equipped with our CTD instrument from ASTD series that allows for more options of sensors to be used and simplifies upgrades when necessary. The CTD and the water sampling bottles can be easily attached and/or detached from the frame which allows for different configurations and also an expedite maintenance.