Filter Results By:

Products

Applications

Manufacturers

Instruments

read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers


Showing recent results 3316 - 3330 of 4234 products found.

  • (Compact PCI) GPIB Controller Card

    Model 488-PXI - ICS Electronics

    * Adds GPIB Controller capability to any PXI or Compact PCI System.* Fast >1 Mbs transfer rate* 488.2V4 Driver supports 32 and 64-bit Windows XP, Vista, Windows 7, 8 and Windows 10 with a true 64-bit DLL.* Compatible with industry standard 'ib' and '488.2' command sets.* Works with Agilent, NI and Kikisui VISA libraries.* ICS's Explorer auto configures your controller as it finds your instruments.* Program with Visual Basic, C, LabVIEW, Matlab or Agilent VEE* Most affordable PXI-GPIB controller card available.

  • Component Testers

    Aplab Limited

    A new generation of impedance test equipment with high accuracy, wide measurement range and six digits resolution. Being featured with test frequency up to 300kHz, test voltage of 5mV ~ 2V, built-in -5V ~ 5V DC bias and -10V ~ 10V DC voltage source output, it can meet all requirements for measuring components and materials and provide guarantees for production line quality assurance, incoming inspection and laboratory precision measurements. The Handler, RS232C and GPIB interfaces as well as improved command system provided by the instrument make it easier to build the test system.

  • Compressed Air Monitor and Alarm

    SENTRY - Edgetech Instruments

    The Edgetech Instruments Model SENTRY detects upset conditions in compressed air systems by constantly monitoring dew point and pressure at the system header or dryer output. The SENTRY alarms when a loss in pressure or high dew point is detected. This information is valuable in detecting compressor failures, system leaks, or drops in dryer performance. A pulsing audible alarm and strobe lamp provide quick notification of upset conditions. The SENTRY also provides a local display of pressure, dew point and system status as well as 4-20mA analog output and alarm relay contacts.

  • CWDM SFP Transceiver Tester for Installation & Verification

    ZonuCheck - Optical Zonu Corp.

    Hand held instrument combines: Transceiver Tester (Tx power and Rx sensitivity),CWDM (Wavelength selective) Optical Power Meter, Media converter (enables GbE connectivity to bypass customer CPE) and datalogger. The new Tester makes the installation, service and maintenance of an SFC Access Network a ?snap? for Field Technicians. Optimized for our SFC Transceivers and Passives, the ZonuCheck? Handheld Tester may be used in any CWDM application to identify ITU CWDM Wavelengths and measure the Optical Power levels for the ten (10) commonly used ITU CWDM Channels.

  • Digital Current Integrator

    ORTEC

    The ORTEC Model 439 Digital Current Integrator was designed to accurately measure dc currents or the average value of pulse currents such as produced by accelerator beams. It digitizes the input current by producing an output pulse for specific values of input charge. A front-panel switch permit the selection of three different amounts of charge (10–10, 10–8 or 10–6 coulomb) required to produce an output pulse. The instrument has a digitizing rate from 0 to 10 kHz to provide wide dynamic range on each setting and high-resolution readout without meter interpolation.

  • Digital Transmission Analyzer

    AV5283 - Wuhan Sunma Technologies Co., Ltd.

    it is mainly used for comprehensive transmission test of SDH/PDH network and equipment and widely applied in the R&D, manufacture, acceptance inspection, performance monitoring, maintenance and measuring of networks and equipment. The instrument can insert and measure varieties of errors and alarms in PDH and SDH systems (including on-line and off-line test), perform performance analysis on various errors as well as modulate and test jitter signals at a max. test rate of 2488MHz (STM16). It also has many function-test capabilites, such as: automatic protection convert test, generation and analysis of pointer adjustment and frequency test.

  • ElectroPuls

    Instron

    With more than ten years of running tests over billions of cycles, ElectroPuls systems are the established materials testing instruments using patented linear motor technology. Offering slow-speed static and high-frequency fatigue testing, this versatile testing capability means ElectroPuls systems are ideal for any lab or office space. Choose from axial only or combined axial-torsion systems that can deliver up to 10kN and 100Nm. Available in 3 sizes, simply pick the one that's right for you. ElectroPuls, a simpler, smarter, safer way to meet your testing needs.

  • Fiber Identifiers & Talk Set

    Fiberinthebox

    Fiber Identifiers and Talk Set are essential installation and maintenance instrument in data networks, CATV and telecommunication networks. Fiber identifier can identify the optical fiber by detecting the optical signals transmitted through the cables. Talk Set combines in one set the functions of both a digital optical phone and a stabilized light source. It is usually used in pairs, and can work over 80km. Fiberinthebox supply different types of Fiber Identifiers and Talk Set to meet you requirement, and they are with rechargeable battery and power supply adapter, so you can use them easily.

  • Fixed Attenuator

    FAXE - Elmika

    Fixed Attenuators are waveguide components for introduction of some particular attenuation value in to the waveguide network for signal leveling or reflection compensation. The attenuators have two types of design: with resistive plate in the waveguide diagonal plane or using coupling technology. The FAXE 3, 6, 10, 15, 20, 30 dB attenuators are available in waveguide bands from 18 through 225 GHz. The FAXE Fixed Attenuators can be used as laboratory Standards against which other instruments or devices are calibrated in case the parameters of these Fixed Attenuators are stable enough and were measured with appropriate accuracy.

  • Forensic Products

    ScienceGL, Inc.

    During 6 years of R&D, original 4D hyper-spectrum data processor software was developed. Based on Hyper-spectrum image stack processing the software is optimized for specific document examining tasks. The program is designed to process data from Hyper-spectral imaging equipment. It was successfully implemented in our partner product ForensicXP automatic full digital hyper-imaging spectrograph. The original patent pending method was developed for spectral signature unwrapping and enhancement of spectrometer output. An exceptional sensitivity of the instrument and broad spectral range permits to detect very small differences in similar inks.

  • For Flaw Detection, Thickness & Dimensional Measurement In Tube & Bar.

    ECHOMAC® FD6 MULTICHANNEL UT - Magnetic Analysis Corp

    *Versatile Ultrasonic tester with superior performance and versatile, intuitive operation.*For full inspection of tubes, pipes and bars, plate and weld.*Operate on or off line.*Upgrade and/or replace older ultrasonic testers.*Use with rotary, spin-the-tube, squirter and bubbler installations.*Vivid, real time, flicker free full color display of test signals, thresholds and settings.*Up to 32 independent channels in one instrument.*Model 6A is GE Qualified as of 9-6-16 for P3TF31 Class A & B, & P29TF82 Class A & B, typical requirements for nuclear and aerospace applications.

  • Guardian Hipot Tester AC/DC/IR/SCAN

    19050 - Chroma Systems Solutions, Inc.

    AC/DC/IR 3 in 1 hipot testerAC 5kV and DC 6kV output1kV insulation resistance testInsulation resistance measurement: 1Ω~50ΩGround continuity checkOpen Short Check(OSC) functionGFI shutdown the instrument when imbalance current > 0.5mAFlashover (ARC) detectionQuick discharge of DUT in IR and DC testPause modeLarge LCD display (240 x 64 dots matrix)UL and TUV approved (*see spec)CE markProgrammable ramp/fall and test timeProgrammable high/low limitSave/Recall program test functionRemote control and interface support2-Year factory warranty

  • HIPOT Insulation Testers

    Laycock Systems

    Crown high voltage, transformer type hipot insulation testers are safe, easy to use for quick, positive determination of grounds, shorts, and broken wires in motors, transformers and other low voltage equipment or wiring systems. A turn of the selector switch gives a selection of seven voltages; 500, 1080, 1250, 1500, 1750, 2000 or 2500 volts calibrated to +/- 5% accuracy; NEMA recommendation for insulation test is twice normal voltage plus 1000 volts. Since this instrument has a capacity of 2500 volts, it readily accommodates all normal requirements.

  • Industrial Automatic Emissivity Measurement System

    Pyrofiber Industrial - Pyrometer Instrument Company

    The Pyrofiber® Industrial Automatic Emissivity Measurement System (AEMS) infrared thermometer uses the latest fiber optic sensor and pulsed laser technology to precisely measure the true target non contact temperature measurement. While all non contact infrared thermometer instruments measure a target radiance temperature, the Pyrofiber® Industrial dynamically determines a targets emissivity value resulting in unmatched temperature control accuracy to ±3° C. With the Pyrofiber® Industrial, laboratory precision temperature control measurement can be made in harsh industrial environments.

  • ISA bus GPIB Controller Card

    Model 488-PC2 - ICS Electronics

    * Adds GPIB Controller capability to any PC with an ISA bus.* Fast data transfer rate, > 300kbytes per second.* Drivers for MS DOS, Windows 3.1, Windows 95 and Windows 98. * IEEE-488.2 linkable libraries for Quick Basic, MS Visual Basic, Borkand C/C++ andMicrosoft C/C++.* Functions as System Controller, Controller-in-charge or a GPIB Device.* Replaces most generic ISA 7210 Cards and NI PC2a cards.* Includes interactive keyboard Control Utility for controlling instruments from the computer keyboard without writing a program.