Filter Results By:





read precision values.

See Also: Instrument Cables, Instrumentation Amplifiers

Showing recent results 3286 - 3300 of 4259 products found.

  • Module Solution

    G18 - 18 - Virginia Panel Corporation

    For maximum versatility and easy access to instrument-side wiring and cable assemblies, VPC offers a selection of slide kits designed to fit most common rack depths. Ordering has been simplified by offering a package that includes the G18 receiver, receiver mounting plate, flanges and instrument bracket. Slides are rated to support 180 lbs (81 kg) to accommodate large fixtures. To determine the slide kit needed, measure rack depth between mounting rails. With this measurement, choose the slide mounting kit that fits the rack.

  • Ocean Surveyor

    Teledyne RD Instruments

    For decades, Teledyne RD Instruments has been the preeminent supplier of Acoustic Doppler Current Profiling (ADCP) instrumentation for open ocean applications. Teledyne RDI’s vessel-mounted Ocean Surveyor family of ADCPs continues to raise the bar, collecting detailed maps of the distribution of water currents and suspended materials through the water column and along the ship’s path - at depths and resolutions previously considered unattainable. In real time, the ADCP is also used to aid in situ decision-making, to adapt field operations, and to understand current regime characteristics.

  • Frequency Counter

    FC-2500A - MRC ltd.

    High sensitivity for the VHF & UHFfrequency measurement, useful for theCB amateur.* Handheld & pocket size instrument.* Wide measuring range up to 2.6 GHz.* Good resolution, 0.1 Hz min. displayunit for 10 MHz range.* Used the exclusive Microprocessor ICoffered the intelligent function:Frequency, Period, Multi resolution,Data hold, Relative measurement, Datarecord( Max., Min., Average reading).* Auto power off & manual power off.* LCD display for low powerconsumption & clear read-out even inbright ambient light condition.

  • 4/8 Channel Optimal Multiport Power Meter

    UC8728 - UC Instruments, Corp.

    UC INSTRUMENTS UC8728 4/8 CHANNEL OPTICAL MULITIPORT POWER METER are PC control multiport passive components power meter test system and offer superior performance for the test of multichannel DWDM, WSS, ROADM, AWG & PLC components and modules, optical amplifiers, DWDM system and other general purpose of multiport fiber optical test and measurement applications. The system can be integrated with tunable laser source, optical attenuator & PDL controller provides a high performance passive components and modules automatic test system platform.

  • 8-Channel, 12-Bit, 60 MHz PXI Oscilloscope

    PXI-5105 / 779685-01 - NI

    60 MHz, 8-Channel, 12-Bit PXI Oscilloscope—The PXI‑5105 high-density PXI oscilloscope device has eight simultaneously-sampled channels with flexible settings for coupling, impedance, voltage range, and filtering. PXI oscilloscopes also feature a number of triggering modes, deep onboard memory, and an instrument driver that includes data streaming and analysis functions. This device is ideal for applications with many channels that require up to 60 MS/s or 60 MHz of analog bandwidth. The PXI‑5105 also features PXI synchronization and data streaming capabilities.

  • Automated Three Phase Coupling/Decoupling Networks

    CDN 3063 Series - Teseq AG

    The new, modular CDN 3063 continue Teseq's philosophy of designing easily upgradeable test instruments that maximize the user's initial investment. Users can select a CDN from this series that fulfils their basic testing needs with the assurance that they can upgrade it to a model to fit different generator compatibility as their testing requirements change. The CDN 3063 is designed for maximum reliability in a wide range of test setups. Over temperature protection, which allows short term operation at currents exceeding the nominal rating, prevents damage to internal components.

  • Automatic Emissivity Measurement System

    Pyrometer Instrument Company

    The Pyrofiber® Lab Automatic Emissivity Measurement System (AEMS) non contact infrared thermometer uses the latest fiber optic sensor and pulsed laser technology to precisely measure the true target temperature measurement. While all non contact infrared thermometer instruments measure a target radiance temperature, the Pyrofiber® Lab dynamically determines a targets emissivity value resulting in unmatched temperature measurement accuracy to ±3° C. With the Pyrofiber® Lab, extremely accurate temperature measurements can be made.

  • (B1500A-A1A, B1500AU-141) 50 s Pulse Medium Current Source/Measure Unit (MCSMU)

    B1514A - Keysight Technologies

    The 50 s Pulse Medium Current SMU is an SMU designed for faster pulsed IV measurement. It enables a pulsed measurement down to 50 s pulse width, a 10 times or more narrow pulsed measurement than provided by a comparable conventional SMU. In addition, the instrument offers a wider range and versatility, up to 30 V / 1A, with voltage/current programmability. It is useful to characterize high to medium power devices on the new materials such as SiC and GaN, and organic devices, and the MCSMU expands your choices of pulsed IV measurement.

  • Benchtop X-ray Diffractometer

    Aeris - Malvern Panalytical Ltd

    Meet Aeris – our brand-new benchtop X-ray diffractometer. Aeris will impress you with data quality and speed of data acquisition so far only seen on full-power systems. The instrument is accessible for everyone with its built-in touch screen and intuitive software. Being a Malvern Panalytical product guarantees delivery of the best benchtop data and full automatability for industrial applications. Aeris is designed for low cost of ownership and is available in 4 editions tailored to the needs of specific markets: the Cement, Minerals, Metals and Research editions.

  • Boiler Tube Oxide Scale Nondestructive Tester

    DX-201' - Dexing Magnet Tech. Co., Ltd

    This instrument is suitable for measuring non-magnetic stainless steel pipe inner layer accumulation rust. It can use a rechargeable battery, without power supply when test, which is suitable for outdoor environment operation. It can be used 4 hours once charge saturation. This product has been used by Hunan Xiangtan Power Generation Company Limited, Wuhan University, Nanyang Henan Yahekou Power Generation Co., Ltd., Anhui Huainan Pingwei power plants and Changsha thermal power plant, received good evaluations.

  • Box Rain Test Chamber

    ACE Technology

    Comprehensive box rain test chamber (with swing pipe and right angle tube) is used to test the electric and electronic devices by simulating natural rainfall with spraying water from the water nozzles (holes) on swing pipe or straight tube. To estimate and recognize if the shell or sealing elements of these device could ensure a good condition of working during and after the test. The products are widely used in the industries of light, electrical, electronics, automobile, motorcycle, household electric appliances, electromechanical equipment, instruments and meters, and other industries.

  • Capacitor Tester

    Cap Check® - HD Electric Company

    The Cap Check® line of capacitor testers is designed to identify internal problems with a capacitor or capacitor bank. The instruments are proven to be a valuable asset in maintaining both pole-mounted and substation capacitors. The testers will identify bad or failing capacitors that may rupture upon energizing. Cap Check III is designed for pole mounted and individual capacitors and can enable a two-man crew to check a bank of 12 in about 20 minutes. Cap Check II is based on the same principles and specifically designed for checking capacitor units in substation banks.

  • Create Topographic Profiles from SPM Images

    TopoStitch - Image Metrology A/S

    topoStitch™ offers the easiest and most accurate way to stitch topographic or greyscale images from Scanning Probe Microscopes (SPM’s), profilers, interferometers, confocal microscopes or any other instrument type. All images are placed automatically according to stage position coordinates when stored in the image files. Otherwise, the Grid Layout Wizard helps to lay out images in seconds. topoStitch™ even offers advanced snapping and semi transparent rendering, which makes it easy to place and adjust images manually.

  • Digital Digitizer

    MOS2 - Holding Informtest

    Mezzanine module (mezzanine) MOS2 is designed to convert instantaneous voltage values ​​of an electrical signal into a digital code, measure instantaneous voltage values. The mezzanine is intended for use in HF and microwave systems as a terminal device for digitizing intermediate frequency signals up to 200 MHz. Together with the frequency converter DOWNCONVERTER 10 GHz LXI manufactured by the holding "Informtest" MOS2 under the control of the common software shell ACM2 makes up a synthetic instrument - spectrum analyzer, a ready-made solution for testing microwave devices and radio reception channels.

  • Digital Display Auto Torsion Testing Machine

    NJS Series - Jinan Testing Equipment IE Corporation

    NJS Series Digital Display Auto Torsion tester is designed and built for torsion test on metal & non-metallic materials, as well as parts & components. NJS is loaded through the rotation of the active cartridge driven by the AC servo motor and cyclonical pinwheel reducer motor. The torque and torsion angle are measured respectively by the high-precision torque transducer and photoelectric encoder. The digital torsion testing machine is an essential instrument to inspect torsion properties of materials for mechanical laboratories of aviation industry, construction industry, scientific research department, universities and industrial enterprises.