Filter Results By:

Products

Applications

Manufacturers

Display

illuminates image signaling.


Showing recent results 1081 - 1095 of 3494 products found.

  • Temperature and Humidity Transmitter

    DST1000 - ZOGLAB Microsystem Co., Ltd.

    Design for airflow velocity and heat transfer rate Applied to HVAC and clean room High-accuracy,wide-measuring range Wide view angle LCD for sharp display Analog or digital output with current ,voltage and RS485 On line calibration-availability

  • Direct Access To INIC Node Information

    INIC Explorer - K2L

    An INIC Explorer enables access to an INIC chip in order to display properties and states and to change the Configuration String/update the firmware. An INIC Explorer interfaces with an INIC's Debug Header via a ribbon cable and with a PC via a RS232/USB connection.

  • flow monitors

    B3000 Series - Badger Meter

    The B3000 Series flow monitor from Blancett provides a flexible, durable, easy-to-use platform for flow metering applications. The B3000 monitor makes it easy to track flow, with a crisp dot-matrix display capable of simultaneous display of flow rate and flow total. With a wide variety of enclosure options for both liquid and gas applications, from intrinsically safe and explosion-proof (flameproof) ratings, to an innovative solar-powered model, there''''s a B3000 monitor to suit your needs. Available instrinsically safe models are housed in a UV-resistant, NEMA 4X-rated enclosure available in direct, panel, pipe, DIN-rail and swivel mounts.

  • Power Analyzers

    MRC ltd.

    Multi-functions : WATT, VA, Whr, Power factor, ACV, * Built-in data hold function.ACA, Hz. * RS-232 output interface.* True AC power ( Watt ) & apparent power ( VA ) * Exclusive custom exclusive design LSI circuit, provides highmeasurement. accuracy, reliability and durability.* True rms display for ACV, ACA. * Built-in over input indication.* Supper large LCD, easy to read-out, display the Watt, * Power supply by batteries.Power factor, Voltage & Current value at the same time. * Built-in low battery indicator .* Auto range. * Durable plastic housing case with handle.

  • Load Cell Tester

    Xiamen Elane Electronics Company, Ltd

    Large six-digit LED display < Easy to use and small in size < Accuracy of 0.005%FS/10ppm < 2 channels CH0 : -12mV/V~+12mV/V, with resolution 0.1uV/V CH1 : -1.6mV/V~+4.8mV/V, with resolution 0.01uV/V < Four user selectable output units (N, kgf, lbf and mv/V) < Peak Hold function to capture and holding the peak value for the immediate or later reference < Clear key to clear the peak value < Presence of tare key and foot switch to zero the display (tare function) < Great for monitoring and testing load cell characteristics (repeatability, linearity, creeping, temperature drift, etc

  • Viscometer

    LS - Chongqing Lushun Scientific & Technological Development Co., Ltd.

    This instrument is sophisticated. It adopts advanced mechanical design and manufacture techniques, and microprocessor controlling technologies, it can accurately collect test data; Take a blue background light, ultra-brighten LCD as its display, so it can display test data intuitively; Designed with a RS232 port, so it can print out test data through a printer, and it can communicate with a computer using the software attached. It is sensitive, reliable, beautiful and convenient to be operated. It is used to determine absolute viscosity of Newton liquids and apparent viscosity of non-Newton liquids. It can be widely used for determining viscosity of grease, paint, plastic, medicine, dope, adhesive, and washing solvents, etc.

  • FTTH Indoor 2-Way Optical Node With AGC

    SR802A - Hangzhou Softel Optic Co., Ltd.

    SR-802A is a new product which our company had developed recently. The pre-amplifier adopts GaAs MMIC and post-amplifier adopts GaAs module from American ACA company, SCM controls digital display parameter that makes more convenience operation and becoming main products in CATV network. This equipment adopts full-GaAs MMIC amplify device. Optimized circuit design coupled with our 10 years professional design experience, make the equipment achieve good performance indexes. Microprocessor control, digital display the parameters, the engineering debug is especially easy. It is the main equipment to build the CATV network.

  • Hardness Testers

    YHT100 - Dandong Flaw Detector Equipment Co., Ltd.

    *LCD display of 128×64 matrix is used.*Hardness scales(HV ,HB,HRC,HRB,HRA,HS).*RS232 interface and USB to PC*Max 600 groups(impact times:32-1)of data can be stored at internal.*Back light display has been used to make convenient or the user in poor light.*Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.*Material of “cast steel” is added HB values can be read out directly when D/DC impact device is used to measure “cast steel” work piece.

  • Battery CCA Tester

    Hangzhou Xun Anda Electrical Co., Ltd.

    1. Test application: 12V/6V batteries test and 12V Starting /Charging system test.2. Test battery type: regular liquid, AGM battery, GEL battery.3. CCA test range: 40~2000CCA (SAE).4. Voltage test range: 1.5-24V.5. Display SOH (state of health), SOC(state of charge).6. Test for multiple battery standards: SAE, DIN, EN, IEC, CA.7. Graphic LCD display with back light, LCD brightness adjustable.8. Multigle language operation: English, Chinese, Germany, French, Spanish.

  • Battery Powered, Portable Test Instrument

    700BH - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 780BH is a battery-powered, portable test instrument that enables you to conduct quick, on-site verification testing and troubleshooting of your Ultra High Definition HDMI system and analog video displays. The 780BH builds on the 780A but adds a larger—7 inch—color touch display and features a real time status bar providing at-a-glance status for the HDMI Tx and HDMI Rx ports. The 780BH supports testing of HDMI devices up to 300MHz. The 780BH also supports testing of both HDCP 1.4 and 2.2/2.3 on HDMI sources, sinks and repeaters.

  • Function Generator

    Jiangnan Jndz Technology Co. Ltd.

    1、Various waveforms: sine, square, triangle, pulse, Ramp and etc.2、TTL signal output3、CMOS signal output4、Output amplitude up to 20Vp-p (25Vp-p on EM1643V)5、Attenuator6、VCF external signal control output signal frequency7、Frequency counter8、DC offset, duty cycle, amplitude and other parameters modulation9、4 digits display of frequency, 3 digits display of amplitude10、High power signal output, direct drive circuit (only EM1643V)11.Short circuit , Over current, Current reverse protection 12、SMT process

  • HDMI Video Generator/Analyzer

    Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 780BH is a battery-powered, portable test instrument that enables you to conduct quick, on-site verification testing and troubleshooting of your Ultra High Definition HDMI system and analog video displays. The 780BH builds on the 780A but adds a larger—7 inch—color touch display and features a real time status bar providing at-a-glance status for the HDMI Tx and HDMI Rx ports. The 780BH supports testing of HDMI devices up to 300MHz. The 780BH also supports testing of both HDCP 1.4 and 2.2/2.3 on HDMI sources, sinks and repeaters.

  • Micromanometer

    6700-VG - KANOMAX USA, Inc.

    *Standard with Bluetooth™ wireless capability which allows you to send your data to your ANDROID™ device.*Supply and exhaust*Memory and Averaging*It measures airflow and pressure readings with a pitot tube or velocity grid.*Displays in both imprerial and metric units*Velocity Grid, Airfoil and Pitot tube mode*Velocity and Pressure*Auto -Range and Zero*Air Density corrected*BRIGHT color display*Dual durometer non-slip durable plastic case*Comes with hands-free neck strap*NIST TRACEABLE CALIBRATION Certificate**NIST TRACEABLE CALIBRATIONS are performed at our facility in ANDOVER, NJ.

  • Milliohm Meter

    Tenmars Electronics Co., Ltd.

    *3-1/2 digit LCD display with maximum reading of 2000.*Low battery indication.*Zero adjustment: External zero adjustment control.*Very low impedance measurement, four-wire type, one pair insulated clip.*Wide measurement range 1 milliohm to 20k Ohm in six switchable steps.*Fuse protection: 2 Amp/250Volt (5mm x 20mm), fast minimum interrupt ratings 1500A.*Function keys: D-H switch lockup readings for LCD display.*Dimensions: 160mm (L) x 100mm (W) x 52mm (D)*Weight: 700g approx.

  • Mini OTDR

    OT-8700 - Radiantech, Inc.

    FiberPal OT-8700 series instruments, with power meter built-in, are new miniature, high performance optical time domain reflectometer which is designed as fiber troubleshooter for locating fiber connector, break and imperfections for access networks. It detects event locations along the optical fiber and displays the results on a 7” color LCD display. FiberPal OT-8700 series are light, reliable and easy to use, hence it is ideal for FTTX testing. The Application Software equipped is used for data analysis, processing and storage. With the USB Interface port, enabling FiberPal OT-8700 series to transfer test data to computer easily.