Filter Results By:

Products

Applications

Manufacturers

Display

illuminates image signaling.


Showing recent results 3451 - 3465 of 3537 products found.

  • Digital Power Meter

    CP-200 - Chyng Hong Electronic Co., Ltd.

    Proper for low capacity rectification load, the accuracy will not deviate even when PF=0.1True RMS voltage, current measure, auto/manual range.Frequency resolution 0.001Hz.All digitized type.Close case calibration, no adjust, soft calibration, high stability, long interval between two calibrations.IDRC CP-268 Series multi-range power meter seven measure parameter: V, A, W, PF, VA, VAR, HzBi-directional active power measurementPeak current over range indication.Current phase lead or lag indication4 screens display , 4 test values at same time, all function refresh rate is 5 times/sec.Last panel set memory.Build-in RS-485 interface, baud rate up to 115K bpsGPIB SCPI compatible (optional)CE approved

  • Programmable & Single Channel - DC (Power Supply).

    PSM-Series - Digital Communication Technologies Ltd

    The PSM-Series are single output / dual range, 120 or 200W, programmable linear DC power supplies. OVP, OCP, OTP, and, output On/Off control protect the PSM-Series and their load from unexpected conditions. High resolution, high regulation, and low ripple are maintained at 1mV/1mA, 0.01%, and <350 Vrms, respectively. Operation and configuration is simplified with a digital interface and a clear LCD display. Standard features include store/recall output memories, automatic stepping with timers for continuous testing and self-testing, and software calibration features to reduce maintenance efforts. SCPI programming, LabVIEW drivers, RS-232C, and GPIB interfaces enable easy automated test system integration and remote control. The PSM-Series are an ideal choice for high precision applications such as QA verification and product development.

  • Four Channel GPS Synchronized IRIG Inserter

    6055B-4G - Instrumentation Technology Systems

    Four Channel GPS Synchronized IRIG Inserter, Model 6055B-4G is a video insertion generator that inserts an IRIG time message in up to four asynchronous video signals. The unit includes a 12 channel GPS receiver that automatically acquires all in-view satellites upon power up and locks an internal IRIG B time code generator to the GPS time reference. Other functions include a full screen annotator, a GPS/IRIG synchronized Countdown Clock and an RS232C port. Display formatting and annotation is performed via an included detachable keyboard or via the RS232 port. Also included are individual event alarm inputs for each channel. Countdown Clock enable (Start) and load (Preset) are controlled by TTL or Contact closure inputs.

  • Six Channel GPS Synchronized IRIG Inserter

    6055B-6GX - Instrumentation Technology Systems

    Model 6055B-6GX is a video insertion generator that inserts an IRIG time message in up to six asynchronous video signals. The unit includes a 12 channel GPS receiver that automatically acquires all in-view satellites upon power up and locks an internal IRIG B time code generator to the GPS time reference. Other functions include a full screen annotator, a GPS/IRIG synchronized Countdown Clock and an RS232C port. Display formatting and annotation is performed via an included detachable keyboard or via the RS232 port. Also included are individual event alarm inputs for each channel. Countdown Clock enable (Start) and load (Preset) are controlled by TTL or Contact closure inputs. An active magnetic mount GPS antenna is included.

  • Three-Phase Transformer Winding Resistance Meters

    TWA Standard Series - IBEKO Power AB

    When it comes to winding resistance measurement on three-phase power transformers and autotransformers, TWA Standard series offers some of the most technically advanced instruments with LCD display in the market. Both models are capable of testing six transformer windings with a one-time cable connection, as well as three-phase automatic transformer demagnetization. The stored magnetic energy is safely automatically discharged at the end of the test. The built-in tap changer control unit enables automated test mode, where the instrument operates the tap changer without operator input and records winding resistance results based on pre-selected stabilization criteria. This option makes the operator’s job significantly easier.Both models can output test currents from 5 mA to 25 A DC for the purpose of winding resistance measurement. TWA40D has a special test mode for checking the synchronization of on-load tap changers with three phases simultaneously tested in parallel, in which the total test current can rise to up to 40 A DC.TWA40D has additional advantages when it comes to non-intrusive tap changer analysis. The unique DVtest method enables checking the moving contacts of on-load tap changers during the transition, measuring the transition time, detecting open circuits, and many other types of faults. It is performed with 0.1 ms sampling rate, simultaneously with the measurement of tap changer motor current which helps with the detection of motor and mechanical issues. A special proprietary algorithm is used for testing tap changers connected through a built-in series (booster) transformer. The DVtest can be performed either on one phase or on three phases simultaneously. It can also be performed as an additional test simultaneously with the winding resistance test in all tap positions.An additional unique advantage of TWA40D is the capability of simultaneously testing the winding resistance of all three phases of a three-phase transformer (connected in a YN configuration). This can significantly shorten the total testing time – for example, it enables the operator to perform 33 measurements instead of 99 on a tap changer with 33 tap positions.The test leads for TWA three-phase transformer winding ohmmeters are interchangeable with the TRT turns ratio testers, which means that both sets of tests can be performed with a single test lead connection to the power transformer terminals.

  • Torque Meter Bench

    Vetek Weighing AB

    BTR is a desktop torque for torque meas urements consisting of a digital indicator model DTR and a strain gauge torque extremely rugged and compact which has a precision better than 0.20%. Ideal for the calibration and the control of torque keys and to rque screwdrivers. Microprocessor indicator is fed by 4 internal batteries with an autonomy of 200 hours, with the AUTO POWER OFF function which activates if any change in the measurement is detected in an interv al of 30 minutes. The new generation electronic section consists of a particularly long-term stable analogue circuit and of a 16 bits A/D converter which ensures 65.000 internal divisions with an acquisition sp eed of 200 conversions per second. On the display there is an analogue bar for torque, that is still active, even in the programming menu.

  • CORROSION GAUGE

    MVX - Dakota Ultrasonics

    The MVX finishes the line of MX gauges with class. This thing is loaded with all of the features of the MX gauges and a lot more. Four selectable display options: RF, Rectified, B-Scan, and Large Digits. An internal data logger that stores a total of 12,000 readings and waveforms, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and auto waveform find just to mention a few! Equipped with a single element flaw prove-up mode for basic angle beam inspections. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability and portability! The MVXview java-based PC software makes this thing a complete kit, and then some!

  • Hardness Testers

    MH310 - Dandong Flaw Detector Equipment Co., Ltd.

    MH310 portable Leeb hardness tester, based on Leeb hardness measuring principle, quickly and easily on-site test the hardness of series meta materials, support free conversion between Leek, Brine , Rockwell hardness scale and others, it uses high contrast segment LCD to display clear, stable performance. integrated high speed thermal printer ,which can print on-site measurements. It is widely used in annealing, tempering, quenching , quality control for the work piece; hardness testing for machine too and automobile chassis ; on site hardness testing of in service non-removable parts; quality testing for hardware, forging, machine too s and special steels; quality control for batch production process and so on.Good quality and effective cost ,which is a wise choice for regular need of hardness testing.

  • Resilient Modulus and Asphalt Testing System

    Atico Export

    The Resilient Modulus software features built and test sequences, and the capability to specify user defined sequences. Contact stress is automatically adjusted according to the above procedures as selected. Available waveforms include haver sine, sine, square and triangular, along with a user defined waveform selection. Optional peak & valley compensation ensures proper and quick matching of the load parameters. Real time displays of the prescribed versus actual dynamic load or the dynamic deformation measurements by each sensor are always present. Deformation ratio of the two sensors, Rv (to ensure that the two deformation sensors are in agreement) and  Mr are also calculated in real time. During export, curve fitting is done to fit the results to models that predict Mr as a function of σm, σd, and CP (cell pressure). Four different functions are calculated automatically

  • TCS Comfort

    Maschinenbau Haldenwang GmbH & Co. KG.

    Trip distance / tachograph meter integrated into the brake tester (only in conjunction with PC)Electronic control unit TCS shockproof (workshop-oriented) aluminum housing with connection D-Sub 25p / D-Sub 9pEntire operation via integrated time and data display, and your existing PC (OS: Windows).Complete measurement and programming of the tachograph types 1311, 1314, 1318, 8400, FTCO 1319 MTCO 1324, TVI 2400, SE 5000, EFAs, SmarTach, DTCO 1381 incl. Integrated dial measurementLCD 4 rows, 16 digits; backlit with an integrated smart card readerMobile and / or stationary usable instrument; used stationary as integrated into the brake tester and the computer; optionally a road measurement is possible.Expression of complete test reportData storage for customer and vehicle datamultilingualism

  • Underground Cable Fault Locator

    KM-CFPL-620 /620B - KUSAM-MECO

    “KUSAM-MECO” underground Cable Fault Pre-locator is an automatic Cable Fault Locator which adopts ARM, FPGA & Dot Matrix Color LCD display Technology. This tester combines both pulse reflecting technology (TDR) & (intelligent Bridge testing (Bridge) (Model-KM-CFPL-620B) for measuring the exact fault location such as broken line, cross faults, earthing, (poor insulation & poor contact of the lead covered cables as well as plastic cables. (Model-KM-CFPL-620B)).It is a microprocessor based fault locator with a user friendly menu. It is easy to operate. It tests almost all telecom & signal cables. It has an English menu which is easy to understand & use. With Megameter & Ohmmeter it enables to test insulation resistance & loop resistance. It has USB Port for uploading test data to computer

  • Inspection Cameras

    PCE Instruments

    The inspection camera opens a new view into the insides of machines and systems; whether an endoscope, thermal imaging camera or infrared thermometer - an inspection camera is the ideal instrument for monitoring and maintenance.Due to the flexible control of the endoscope or the visual display of potential damage areas in machines or systems, weaknesses and points of failure can be detected and therefore be prevented. The inspection camera make this possible without the need for complex disassembly.The inspection camera is used by electricians, safety experts, expert witnesses, mechatronics, and mechanics. The inspection camera is also used for apprenticeships and in-service training. An inspection camera can be applied internally as well as at school or at universities for demonstration purposes. With their help, inspections in the industrial sector can be organized considerably faster, more targeted and more cost-efficient. An inspection camera is an important companion in the course of everyday work.

  • Multifunctional Meter

    CPM-10 - Chang Shuan Electronics Co., Ltd.

    CPM-10 Multifunction Power meter measure single phase 2 wire ,single phase 3 wire, three phase 3 Wire and 3 Phase 4 wire systems with high accuracy measurement for parameters such as voltage, current ,active power, reactive power, apparent power, power factor ,frequency, effective energy (V,A,W,Watt-Hr,Var,Var-Hr,VA,PF,Hz), having LED display and standard communication RTU Modbus RS485..Optional functions 1 set relay output,1 analogue,1 RS485 (ModbusRTU Mode) or 1 pulse output. Most suitable for power management,remote input /output, alarm and remote signal control uses needs.Case depth 120mm only, easy panel mounting installation

  • Simple Handheld Resistivity Meter

    LandMapper ERM-01 - Landviser, LLC

    LandMapper® ERM-01 measures electrical resistivity or conductivity of soils and related media for express non invasive mapping and monitoring of agricultural fields as well as construction and remediation sites. In a typical setting, a four-electrode probe is placed on the surface and an electrical resistivity value is read from the digital display. The device measures electrical resistivity in a surface layer of the depth from 2 cm down to 20 m, which is set by varying the size of a four-electrode probe. Measurements are based on well-known four-electrode principle, which allows to avoid influence of electrode contact potential on measured electrical conductivity or resistivity of the media and obtain accurate readings. The field tests were performed by our customers in USA, Russia, China, Canada, Sweden, France, Germany, Iraq, Dubai, Brazil, Panama and many others.

  • Wireless Microscope

    OCI-20BN-W - ShinewayTech

    OCI-20BN-W is a portable optical fiber connector inspector for checking fiber and connector end-face cleanliness, ideal for bench top and fiber optic network installation technicians to eliminate error caused by poor quality or improper cleaning.OCI-20BN-W offers excellent viewing on connector/fiber end-face and is able to feature to record and save image/video of fiber end-face; It can be connected to PC or phone by WIFI.More than 40 assorted high-precision tips designed for inspection solutionsAngled/Lengthened tips for awkward positions.Connect smart phone for testing FiberEye2 is the application on an android or IOS smart phone to capture, display and record the fiber end-face image from the Wi-Fi probe.Connect tablet/laptop for testing EFD  is the analysis software on Windows tablet/laptop to have dusts, and scratches on end face inspected, analyzed,  compiled and reported