Filter Results By:

Products

Applications

Manufacturers

Display

illuminates image signaling.


Showing recent results 3391 - 3405 of 3494 products found.

  • Chassis

    CXM/128-MF - Cytec Corp.

    These Chassis controls up to 16 8x1 modules, 32 4x1 modules or mixtures of 8x1"s, 4x1"s, 2x1"s and 2x2 modules in any combination or configuration for up to 128 relay drives. LEDs on the front panel show switch and power status. Add Switch Modules, display / driver modules and a Control Module to complete the system or simply buy the chassis wired out to D connectors to control your own relays. A manual control is optional. Chassis is available with sink or source relay drivers from + 5 to + 28 volts, ot TTL drivers for programmable attenuators. Firmware commands for Fade and Handover for WiFi, Cell Phone and WiMax labs. Fully custom systems built with little to no NRE.

  • K-3980 Battery Load Bank / Battery Load Unit

    K-3980 - Kongter Test & Measurement Co., Limited

    K-3980 series customized DC load banks feature unique design and excellent performance that will facilitate your work for battery maintenance. It covers different types of batteries (1.2V, 2V, 6V and 12V). With different customer-tailored models, it covers a wide discharge range from 12V to 480V for users from different industries. With optional DAC, discharge values of each cell could be monitored on the LCD display and computer simultaneously by using the Kongter PC software. For charge and discharge of single cell, you could also consider BCD-3932T Battery Charger/Discharger for 1.2V, 2V, 6V and 12V cell types. Also, same DAC in K-3980 can work independently with a “String DAC” to make another product, the BDL-3926C Battery Data Logger.

  • Soldering Station

    SM-898D - MCH Instruments Co.,Ltd.

    *Using micro-processor PID program control technology, precise dual digital display hot air gun and the stability of the actual temperature of the soldering iron, fast automatic temperature compensation feature further enhanced temperatures.*The amount of wind, air flow, temperature soldering iron are adjustable.*The air gun holder is a magnetron (or light control), holding the handle when the system will automatically enter the working mode; handle is placed on the shelf when the system enters standby mode automatically.(One more than the 898D Auto Sleep off function)*System with automatic cold wind function, can prolong the life of the heating element.*This product uses "brushless fan" as a source of air, reduce noise, improve work efficiency

  • Six Channel GPS Synchronized IRIG Inserter

    6055B-6GX - Instrumentation Technology Systems

    Model 6055B-6GX is a video insertion generator that inserts an IRIG time message in up to six asynchronous video signals. The unit includes a 12 channel GPS receiver that automatically acquires all in-view satellites upon power up and locks an internal IRIG B time code generator to the GPS time reference. Other functions include a full screen annotator, a GPS/IRIG synchronized Countdown Clock and an RS232C port. Display formatting and annotation is performed via an included detachable keyboard or via the RS232 port. Also included are individual event alarm inputs for each channel. Countdown Clock enable (Start) and load (Preset) are controlled by TTL or Contact closure inputs. An active magnetic mount GPS antenna is included.

  • Digital Power Meter

    CP-200 - Chyng Hong Electronic Co., Ltd.

    Proper for low capacity rectification load, the accuracy will not deviate even when PF=0.1True RMS voltage, current measure, auto/manual range.Frequency resolution 0.001Hz.All digitized type.Close case calibration, no adjust, soft calibration, high stability, long interval between two calibrations.IDRC CP-268 Series multi-range power meter seven measure parameter: V, A, W, PF, VA, VAR, HzBi-directional active power measurementPeak current over range indication.Current phase lead or lag indication4 screens display , 4 test values at same time, all function refresh rate is 5 times/sec.Last panel set memory.Build-in RS-485 interface, baud rate up to 115K bpsGPIB SCPI compatible (optional)CE approved

  • Four Channel GPS Synchronized IRIG Inserter

    6055B-4G - Instrumentation Technology Systems

    Four Channel GPS Synchronized IRIG Inserter, Model 6055B-4G is a video insertion generator that inserts an IRIG time message in up to four asynchronous video signals. The unit includes a 12 channel GPS receiver that automatically acquires all in-view satellites upon power up and locks an internal IRIG B time code generator to the GPS time reference. Other functions include a full screen annotator, a GPS/IRIG synchronized Countdown Clock and an RS232C port. Display formatting and annotation is performed via an included detachable keyboard or via the RS232 port. Also included are individual event alarm inputs for each channel. Countdown Clock enable (Start) and load (Preset) are controlled by TTL or Contact closure inputs.

  • Vision Systems

    ADLINK Technology Inc.

    Embedded vision systems, also referred to as compact vision systems, offer an alternative to Smart cameras and computer-based systems. The ADLINK EOS series is a complete embedded system that offers image acquisition, processing, archiving, and display capabilities. It is equipped with a multi-core CPU, ideal for applications requiring high computing power and multi-camera imaging, such as 3D vision and robotics guidance. Featuring rich I/O connectivity with factory-floor networks, including RS-232/422/485, USB, and isolated digital I/O, as well as onboard storage, ADLINK’s embedded vision system is ready to deploy. A system monitoring feature, feeding back temperature and voltage data, combines with a watchdog timer to maximize robustness and reliability of the ADLINK EOS series in mission critical applications.

  • ADAQ Data Systems

    Atec, Inc.

    ADAQ™ is Atec’s custom engine test software and system, built upon the industry-proven National Instruments LabVIEW and LabWindows™/CVI. Atec’s Data Acquisition and Control System is a modern, full-featured, highly integrated hardware and software solution that is applicable to most commercial and military turbine engine test cell applications. It is robust, versatile, user friendly, and specifically designed to handle the demanding requirements of engine testing. ADAQ™ links seamlessly to digital engine modules (FADECs, DEECs, EECs, ECUs) as well as older analog and mechanical controls. ADAQ™ has been designed and improved since version 1.0 in 2006. Users can create, remove, calibrate & display channels, and generate custom calculations, screens and reports.

  • Three-Phase Transformer Winding Resistance Meters

    TWA Standard Series - IBEKO Power AB

    When it comes to winding resistance measurement on three-phase power transformers and autotransformers, TWA Standard series offers some of the most technically advanced instruments with LCD display in the market. Both models are capable of testing six transformer windings with a one-time cable connection, as well as three-phase automatic transformer demagnetization. The stored magnetic energy is safely automatically discharged at the end of the test. The built-in tap changer control unit enables automated test mode, where the instrument operates the tap changer without operator input and records winding resistance results based on pre-selected stabilization criteria. This option makes the operator’s job significantly easier.Both models can output test currents from 5 mA to 25 A DC for the purpose of winding resistance measurement. TWA40D has a special test mode for checking the synchronization of on-load tap changers with three phases simultaneously tested in parallel, in which the total test current can rise to up to 40 A DC.TWA40D has additional advantages when it comes to non-intrusive tap changer analysis. The unique DVtest method enables checking the moving contacts of on-load tap changers during the transition, measuring the transition time, detecting open circuits, and many other types of faults. It is performed with 0.1 ms sampling rate, simultaneously with the measurement of tap changer motor current which helps with the detection of motor and mechanical issues. A special proprietary algorithm is used for testing tap changers connected through a built-in series (booster) transformer. The DVtest can be performed either on one phase or on three phases simultaneously. It can also be performed as an additional test simultaneously with the winding resistance test in all tap positions.An additional unique advantage of TWA40D is the capability of simultaneously testing the winding resistance of all three phases of a three-phase transformer (connected in a YN configuration). This can significantly shorten the total testing time – for example, it enables the operator to perform 33 measurements instead of 99 on a tap changer with 33 tap positions.The test leads for TWA three-phase transformer winding ohmmeters are interchangeable with the TRT turns ratio testers, which means that both sets of tests can be performed with a single test lead connection to the power transformer terminals.

  • Wireless Microscope

    OCI-20BN-W - ShinewayTech

    OCI-20BN-W is a portable optical fiber connector inspector for checking fiber and connector end-face cleanliness, ideal for bench top and fiber optic network installation technicians to eliminate error caused by poor quality or improper cleaning.OCI-20BN-W offers excellent viewing on connector/fiber end-face and is able to feature to record and save image/video of fiber end-face; It can be connected to PC or phone by WIFI.More than 40 assorted high-precision tips designed for inspection solutionsAngled/Lengthened tips for awkward positions.Connect smart phone for testing FiberEye2 is the application on an android or IOS smart phone to capture, display and record the fiber end-face image from the Wi-Fi probe.Connect tablet/laptop for testing EFD  is the analysis software on Windows tablet/laptop to have dusts, and scratches on end face inspected, analyzed,  compiled and reported

  • Resilient Modulus and Asphalt Testing System

    Atico Export

    The Resilient Modulus software features built and test sequences, and the capability to specify user defined sequences. Contact stress is automatically adjusted according to the above procedures as selected. Available waveforms include haver sine, sine, square and triangular, along with a user defined waveform selection. Optional peak & valley compensation ensures proper and quick matching of the load parameters. Real time displays of the prescribed versus actual dynamic load or the dynamic deformation measurements by each sensor are always present. Deformation ratio of the two sensors, Rv (to ensure that the two deformation sensors are in agreement) and  Mr are also calculated in real time. During export, curve fitting is done to fit the results to models that predict Mr as a function of σm, σd, and CP (cell pressure). Four different functions are calculated automatically

  • TCS Comfort

    Maschinenbau Haldenwang GmbH & Co. KG.

    Trip distance / tachograph meter integrated into the brake tester (only in conjunction with PC)Electronic control unit TCS shockproof (workshop-oriented) aluminum housing with connection D-Sub 25p / D-Sub 9pEntire operation via integrated time and data display, and your existing PC (OS: Windows).Complete measurement and programming of the tachograph types 1311, 1314, 1318, 8400, FTCO 1319 MTCO 1324, TVI 2400, SE 5000, EFAs, SmarTach, DTCO 1381 incl. Integrated dial measurementLCD 4 rows, 16 digits; backlit with an integrated smart card readerMobile and / or stationary usable instrument; used stationary as integrated into the brake tester and the computer; optionally a road measurement is possible.Expression of complete test reportData storage for customer and vehicle datamultilingualism

  • Trip Amplifiers

    Datexel

    Datexel manufacture a large range of Trip Amplifiers and Process Limit Alarms that accept universal inputs and provide either relays or NPN or PNP transistor outputs. The DAT5028 is also an isolated signal converter and has a local display with up to 4 relays and is DIP switch programmable. The inputs can be Thermocouples, RTD, mV, mA, Resistance, Potentiometers or Voltage. They can be supplied fully configured set up by PC or DIP switches. The DAT5024 is a trip Amplifier / Temperature limit alarm for RTD's, Thermocouples, Voltage, Resistance and Current with the option of 1 or 2 relay outputs hysteresis and delay timers. The DAT5024 E range is an economical choice with DIP Switch programmable for voltage or current input. Either 1 relay or 2 relays (SPDT) are available with delay timers.

  • General Purpose Geiger Counter

    Radalert® 100X - International Medcom

    The Radalert® 100X is a general purpose geiger counter that measures alpha, beta, gamma, and X-radiation. Features of the Radalert® 100X, include a three-second update and a Utility Menu that allows you to change the default settings for several operating parameters. Its digital liquid crystal display (LCD) shows the current radiation level in your choice of SI units (microsieverts per hour) from .000 to 1,100 and counts per minute (CPM) from 0 to 350,000 or counts per second (CPS) from 0 to 3,500. For users of conventional units mR/hr (milliroentgens per hour) from .000 to 110 and CPM are optional in the Utility Menu. This instrument also offers an accumulated total and timer function, up to 9,999,000 counts and 40 hours.

  • Inspection Cameras

    PCE Instruments

    The inspection camera opens a new view into the insides of machines and systems; whether an endoscope, thermal imaging camera or infrared thermometer - an inspection camera is the ideal instrument for monitoring and maintenance.Due to the flexible control of the endoscope or the visual display of potential damage areas in machines or systems, weaknesses and points of failure can be detected and therefore be prevented. The inspection camera make this possible without the need for complex disassembly.The inspection camera is used by electricians, safety experts, expert witnesses, mechatronics, and mechanics. The inspection camera is also used for apprenticeships and in-service training. An inspection camera can be applied internally as well as at school or at universities for demonstration purposes. With their help, inspections in the industrial sector can be organized considerably faster, more targeted and more cost-efficient. An inspection camera is an important companion in the course of everyday work.