Filter Results By:

Products

Applications

Manufacturers

Display

illuminates image signaling.


Showing recent results 3241 - 3255 of 3494 products found.

  • XYZ Color Sensor

    AS7261 - ams AG

    Calibrated XYZ color sensor provides complete, integrated platform for handheld color analyzers, color calibration and mobile analysis devices. Tri-stimulus XYZ realized by silicon interference filters. UART or I²C slave digital Interface. 16-bit ADC with digital access. Programmable LED drivers. 20-pin LGA package 4.5mm x 4.7mm x 2.5mm, with built-in aperture. Compact true-color sensing. Applications; Color/CCT sensing, Fluid or reagent analysis, Color point comparison, Display calibration.

  • Modbus Data Acquisition

    Datexel

    The Datexel range of Data Acquisition equipment includes Modbus RTU Masters and Slaves, Modbus Input, Modbus Output Modules, Modbus Isolation Modules and Modbus Repeaters. The range also includes converters (RS485, USB, RS232, RS422, TCP-IP). By combining these units with the DAT3000 and DAT10000 series a complete solution for your Data Acquisition can be found from Datexel. The DAT9550 is a remote Modbus display unit that can be programmed to accept data from Modbus slaves or masters such as a PLC or the DAT9000 range of Modbus controllers.

  • Function Generator

    FG-109 - PINTEK Electronics

    *FG-109 is a function generator with a high resolution of 10MHz DDS.*Various output waveforms: Sine, Square, Triangle, Pulse, Anti-Pulse.*Variable DC offset control : ±10V(no load).*Store / Recall. 20 settings*Counter up to 60MHz high frequency.*AM with internal and external carry.*Sweep mode with Linear and Log slope.*FM wide modulation range up to 10 times.*The signal Attenuate can be -20dB or -40 dB.*USB terminal for computer operation.*LCD Display

  • Digitally Tareable Load Cell Amplifier with Indicator

    SY046 - Synectic Electronics

    The SY046 Digitally Tareable Load Cell Amplifier is an analogue amplifier with the digital gain advantages. This amplifier can excite up to 4 x 350Ω bridge transducers and provides either a 4 – 20mA, 0 – 5V or 0 – 10V output with a remotely triggered zero offset.  This feature is of great value when load cells are difficult to access or other strain gauged components have been installed in difficult environments.  The display is very useful during set up and calibration.

  • Network Sensor Interface for USB Pressure Transducers

    SI314 - Validyne Engineering

    The Validyne model SI314 is a network interface that connects our model P61 USB pressure Transducer to your smart phone or network web browser. The SI314 supports Ethernet and Wi-Fi connections and will display current pressure readings and transducer status on any web browser or via smart phone. The SI314 also displays the transducer temperature, date of calibration, model and serial numbers and these can be viewed wirelessly or by Ethernet connection. The SI314 makes your P61 accessible from anywhere in the world. Data logging of pressure data is configured via a web browser or smart phone and readings may be stored once per minute to once per hour. A thumb drive or memory card collects the data in comma separated file format(csv) for download to your computer. The data may also be accessed via the network. A graph of the data is also generated on request. A Twitter function allows pressure data to be tweeted from the SI314 at user-defined intervals. The transducer zero and span calibration adjustments are password protected and operated via browser buttons. No potentiometer adjustments are required to calibrate the P61 transducer. Contact our Sales Department for a link to the Demo!

  • Analog Sensors

    Solar Light Company Inc.

    Solar Light’s NIST-Traceable PMA-Series Analog Sensors represent the pinnacle of accuracy, durability, and selection on the market today. Our sensors measure discrete bands of the electromagnetic spectrum from the UVA, UVB, UVA+B, UVC, Visible Light, and Infrared regions. Both narrow and broad bands are available, to fit any application, including germicidal applications, environmental probes, and sensors for biologically weighted spectra (such as the erythema and CIE action spectra.) Over 135 different sensors are available in a variety of packages to fit any environment, from indoor clean rooms to harsh locations outdoors to 100 meters under water. Please note that Solar Light offers both Digital Sensors and Analog Sensors in the PMA-Series lineup. Select these Analog Sensors if you don’t need a digital display output of the reading, if you will be connecting to your own datalogger, or if you plan to use a voltage source to provide excitation voltage to the sensor and a digital volt or amp meter to read and convert the results. Analog Sensors are typically used as process sensors that are permanently installed to provide ongoing information. Typical current draw is under 1mA. (By contrast, Digital models are typically used as discrete sensors that are portable and located to provide short term information.)

  • Battery Chargers

    BAC Series - IBEKO Power AB

    Battery charger BAC series is a portable and universal battery charging solution. It is primarily intended for charging Lead-Acid, Ni-Cd and Li-ion batteries from 1 V DC to 300V DC level. However, the unit can charge the string of any battery type by one of the available charge modes:IU (constant current + constant voltage)UU (constant voltage + constant voltage with a current limit)Charging modes provide a safe regulation of charging procedure and achieves fast recharge and low risk of overcharge.Variety of implemented protections, such as thermal, overcurrent, undervoltage, and overvoltage, assure the charging process will be safe for the battery and the instrument itself.A user doesn’t have to switch off the main charger in order to use BAC series charger. Just the opposite, the BAC series charger should support the main charger to speed up the process. An alternative use is to quickly recharge a battery following a discharge test.The provided display enables users to monitor all relevant information during the charging process and to adjust charging parameters and limits in real-time.The instrument offers the best power-to-weight ratio in the market, weighing only 10 kg / 22 lbs with the maximum output power of 2,7 kW.The maximum charging currents for lead-acid, Ni-Cd and Li-ion batteries, at various battery voltages, are presented in the brochure.

  • Jammer DDS Convoy Portable

    WF-VIP JAM6 - Wolvesfleet Technology Co.

    01. High-power portable multi-band jammer.02. Upgraded jamming signal source (DDS technology) to provide utmost efficiency.03. Field programmability for rapid adjustment frequency and output power.04. Fully modular compact design with extremely high efficient cooling system provide very good system stability even in hard climatic conditions. Also easy for maintenance, repair and upgrade.05. Jam up to six different jamming modules simultaneously, and cover up to 20 different frequency bands.06. Each module with LCD display to show its working frequency ,output power and etc.07. Increased total RF output power up to 600 watt.08. Equipped with a wired remote control unit. The operator can ON/OFF each module through the wired remote controller.09. Fully portable trolley-type case. Easy to be carried.10. Supplied by AC mains or DC power source.11. Backup battery system or generator system can be optional.12. The jamming system with an active smart cooling system in a continuously cycle working.13. Based on our general design, we can further customize our systems to be client-specified scenarios both for military and civil applications in order to provide the best individual solution.

  • Open Pluggable Specification (OPS) Digital Signage Player With LGA1151 Socket 7th/6th Gen Intel® Core™ I7/i5/i3 & Celeron® Processor, Intel® Q170 And Intel® AMT 11.0

    OPS500-501 - Axiomtek Co., Ltd.

    The OPS500-501 is a 4K resolution OPS compliant digital signage player supporting Intel® Active Management Technology (AMT) 11.0 for better remote management. The space-saving OPS signage module is powered by the 6th generation Intel® Core™ processor with Intel® Q170 chipset. It has one 260-pin DDR4-2133 SO-DIMM socket with up to 16GB memory capacity. Compliant with the Intel® OPS architecture, the 4K-ready signage player provides a high level of compatibility as well as simplified installation, maintenance and deployment for a lower total cost of ownership. The outstanding digital signage player, the OPS500-501, is connected to OPS-compliant display via a standardized JAE TX-25A plug connector that supports DisplayPort, HDMI 2.0, UART, audio, USB 3.0 and USB 2.0 signals. To meet various application needs, the powerful digital signage system offers rich I/O interfaces on its front panel, including one USB 2.0 ports, two USB 3.0 ports, one COM port, audio (in/out), HDMI and a Gigabit Ethernet port. This space-saving OPS signage player has one PCI Express Mini Card slot for WLAN connectivity and features one 2.5” SATA HDD for extensive storage needs.

  • Two Channel GPS Synchronized IRIG Generator/Video Inserter

    6055C-2G - Instrumentation Technology Systems

    Two Channel GPS Synchronized IRIG Generator/Video Inserter, Model 6055C-2G provides for the insertion of alphanumeric messages, date/time and countdown clock, into two, asynchronous, RS-170, NTSC, PAL or S-Video signals. The unit includes a 12 channel GPS receiver that automatically acquires all in-view satellites upon power up and locks an internal IRIG B time code generator to the GPS time reference. The time message may be display in Julian or Gregorian format as selected by the operator. Annotation, positioning of the time message and positioning of the alarm messages can be done via the keyboard and/or the RS-232 or Ethernet ports. The IRIG time may also be transmitted over the RS-232 and Ethernet ports upon command from the keyboard or either port. Sixteen discrete control inputs, eight per channel, are used to enable the alarm/event messages with either a TTL level or a contact closure. The time reference is user selectable as GPS or IRIG. A loss of the selected reference input causes the 6055C-2G to automatically switch to an internal real time clock. If it is desired to operate the unit without GPS or IRIG B input, this clock may be set by the user with the keyboard or via the RS-232 or Ethernet port. The Countdown Clock is set via the keyboard or remotely and controlled by two discrete TTL inputs.

  • USB Type-C Test Fixture | CB26U | Cable & Harness Tester

    CAMI Research Inc. (CableEye®)

    A USB Type-C test interface board for CableEye cable and harness testing systems. Consisting of a daughter board, populated with two USB-C female connectors, it allows users to continuity-check USB Type-C terminated cables using the CableEye tester while seeing the connectors-under-test rendered graphically. The CB26U fits all CableEye models.ConfigurationA leader in development of PC-based cable and wire harness, continuity, resistance and hipot test systems for over 20 years, CAMI offers the CableEye suite of products complete with accessories – including “connector boards”. The selection of these test fixture boards is constantly growing and is currently numbering over 60 – most of which are populated with ‘families’ of connectors. When pre-populated boards are used, the tester GUI automatically displays a graphic of the connectors under test.Sold as a set of two boards, each CB26U accepts two USB Type-C connectors. In addition to the latest CableEye software, it requires the CB26 small-frame motherboard (Item 756) for operation, and plugs into one of two available slots – two USB-C-connectors can be tested simultaneously. The CB26 (with CB26U) attaches to the tester like a regular connector board.WarrantyAll connector boards are included in CableEye’s standard, renewable one-year warranty of the tester for which it was purchased.Contact sales@camiresearch.com or +1 (978) 266-2655 for a quote.

  • Vehicle Bomb Signal Jammer System

    VIP JAM6 - Wolvesfleet Technology Co.

    1. High-power portable multi-band jammer.02. Upgraded jamming signal source (DDS technology) to provide utmost efficiency.03. Field programmability for rapid adjustment frequency and output power.04. Fully modular compact design with extremely high efficient cooling system provide very good system stability even in hard climatic conditions. Also easy for maintenance, repair and upgrade.05. Jam up to six different jamming modules simultaneously, and cover up to 20 different frequency bands.06. Each module with LCD display to show its working frequency ,output power and etc.07. Increased total RF output power up to 600 watt.08. Equipped with a wired remote control unit. The operator can ON/OFF each module through the wired remote controller.09. Fully portable trolley-type case. Easy to be carried.10. Supplied by AC mains or DC power source.11. Backup battery system or generator system can be optional.12. The jamming system with an active smart cooling system in a continuously cycle working.13. Based on our general design, we can further customize our systems to be client-specified scenarios both for military and civil applications in order to provide the best individual solution.

  • DC Power Supply, 6V, 5A, 30W

    E36100 Series - Keysight Technologies

    Keysight E36100 Series basic DC power supplies feature a compact size (2U, -rack), a high-contrast OLED display that is viewable from any angle, and modern USB and LAN (LXI Core) connectivity. They also include low power current measurement capability and overvoltage, overcurrent, and overtemperature protection. You can control these power supplies via the intuitive front-panel interface, a Web interface running on a browser, a SCPI or IVI program, Keysight IO Libraries, or a BenchVue app running on your PC or mobile device.

  • Luminance Meters

    Metrue Inc.

    Luminance meter utilizes a CCD in order to take the luminance of every pixel in an image. It is perfect for applications in which the luminance to be measured will vary greatly and in which multiple points must be taken or in which the zonal luminance and total average luminance is important. Image luminance meters can also be used in glare measurement, LEDs, automotive lights, traffic lights, indicator lamps, instrument and equipment panels, landscape and street lighting, biological luminescence, and any sort of display including LED, plasma, OLED, and any backlight panel.

  • Universal Tester 10kN CT

    84-03 - Testing Machines, Inc.

    The 10kN is a twin-column Universal Materials tester that can be programmed with up to 100 different test methods. Testing capabilities include Tensile, Compression and Flexural based on the type of grip or fixture supplied for the required application. A selection of load cells are offered allowing force measurements from 1 gram to the maximum capacity of the test frame. These tests range from the most basic to the most sophisticated machine control, all with full graphics and statistical display. They are ideal solutions to testing problems where there is a need for precise, efficient and consistent performance.