Filter Results By:

Products

Applications

Manufacturers

Display

illuminates image signaling.


Showing recent results 3121 - 3135 of 3546 products found.

  • New Link system Control and Image Capture Software

    Linkam Scientific Instruments

    New uncluttered and intuitive user interfaceLive display of current status for easy monitoringFull control of heating and cooling rate, limit and hold time of up to 100 rampsRow by Row control of Vacuum, Humidity, Tensile Force and Shear modes controllable and synchronised with TemperatureParameters of connected Linkam sensors displayed and stored - e.g. Vacuum, Humidity, Force, XY position and Pressure (dependent on connected stage type)Real Time chart of temperature and other measured parametersTrigger I/O for synchronisation with other equipmentTriggers recorded and plotted row by rowAutomatic setup of controls and parameter limits based on stage type connectedFull five point temperature calibrationUSB 2.0 to T96 and CSS450 ControllersOptional modules including Linkam Imaging Systems with high performance camerasIncludes .NET Components for easy integration into 3rd party applications e.g. LabViewNative 64 bit application

  • Optical Chopper

    Edmund Optics Inc.

    These high stability variable frequency optical choppers each include a set of chemically blackened photoetched chopping discs. The mini chopper is an excellent choice for applications requiring a compact package. The chopping discs come in a variety of slot apertures and allow operation. Beam diameter is limited to 0.75mm when using the 200-slot disc and 1.0mm when using the 40 slot mini disc. The easy-to-interchange blades are made of non-magnetic, half hard brass and can be used in combination. Chopping frequency is set by adjusting a ten-turn dial or by applying an external DC voltage to the BNC input. Reference output is a TTL pulse and is in-phase with chopping action. The 5 digit led display gives a direct read-out of the chopping frequency. Power: 90-130V or 180-260V; 50/60Hz; 12VA max. Power supply included. Choppers are often used together with lock-in amplifiers.

  • Overhead Line Grounding Fault Locator

    XJD-100 - ZIBO WIT ELECTRIC CO.,LTD

    1. Apply to small current neutral grounding distribution power system.2. Used to detect the over head line metallic grounding fault, arc grounding fault, resistance grounding fault and so on.3. Workable for broke down line, apply for branch line4. Ultralow frequency signal to avoid capacitor influence. Easy to find the high resistive fault5. Recreate fault by high voltage signal, easy to locate6. Safe transmitter by black and short-circuit function7. High sensitive sensor, open design and easy to hang on the line8. Wireless transmission, safe and reliable9. Flexible power supply. Transmitter is workable by Utility power and electric generator. Sensor and receiver are by dry battery10. Light and easy to carry11. Receiver has large LCD display interface, which can show the current waveform and current value

  • Portable Calibration Baths

    6109A / 7109A - Fluke Calibration

    The Fluke Calibration 6109A and 7109A Portable Calibration Baths are liquid baths that let process industry professionals calibrate four times more sanitary sensors per batch in less time and with twice the accuracy of other portable baths in this class. Larger than micro baths, up to four tri-clamp sanitary sensors fit easily into these baths for calibration at ± 0.1 °C temperature display accuracy. Throughput is even higher for sanitary RTDs with small or no flanges. Two bath models cover a wide temperature range: 35 °C to 250 °C for the 6109A and -25 °C to 140 °C for the 7109A. Each model offers a “-P” version that includes process electronics for connecting an external reference probe. Professionals working in clean process industries, including facilities managers, production engineers and calibration technicians, prefer these baths for a variety of reasons.

  • Portable Hardness Testers

    NovoTest

    The UCI hardness measuring method complies to ASTM A1038.The ultrasonic contact impedance (UCI) probe is purposed to be used for hardness measuring in the case of the testing area minimal thickness (from 1 mm), objects of complex surface shape, and for measuring surface hardened layers hardness.This method is very fast and easy: place the probe on the tested object surface, press the probe with the required effort to the surface and save the hardness value, shown on the display of the device. Small size diamond indenter allows measuring hardness value of all items, which are thicker than 1 mm. The UCI method of hardness testing is the least destructive because the hardness tester NOVOTEST T-UD3 with UCI probe leaves much smaller prints (imprints) than the majority of bench hardness tester would. That’s why a portable hardness tester with UCI probe is the best choice.

  • Power Monitor

    P4200 Kill A Watt Wireless - P3 International Corp.

    Now, you can monitor your power consumption remotely. Simply plug in the wireless sensor along with the item(s) you wish to check and it will transmit data to the central LCD display where you can see your cumulative electrical expenses and your carbon footprint. Carbon footprint can be defined as: The total amount of greenhouse gases produced, directly and indirectly, as a by-product of human activity and understanding your carbon footprint can be a very powerful tool in recognizing the impact your personal behavior has on global warming. Monitoring the power consumption of your household electronics allows you to see how they contribute to your carbon footprint. Built-in software allows you to customize the device to fit you; giving you the ability to take KWH (kilowatt hour) data and combine it with the type of electricity that is generated in your area (i.e. coal, hydro, atomic) for a more precise reading.

  • Solar Installation Test Kit

    PV210 - Seaward Group USA

    The Seaward Solar PV210 PV installation tester provides a highly efficient and effective test and diagnostic solution for PV systems, carrying out all commissioning tests required by IEC 62446 and performing fast and accurate measurement of I-V curves in accordance with IEC 61829. With direct connection to individual PV modules or strings using the supplied lead sets, tests can be conducted easily and within a matter of seconds at the press of a single button. A high contrast display is clearly visible in direct sunlight and shows open circuit voltage, short circuit current, maximum power point voltage, current and power, as well as the fill factor of the PV module or system under test, and insulation resistance (as part of an auto sequence or a discrete probe to probe measurement). If the measured curve deviates from the expected profile, the PV210 alerts the user to this, identifying the need for further analysis.

  • Spectrophotometers

    GAO Tek Inc.

    GAOTek Color Spectrophotometer with Customized Aperture – a portable and impressively precise color measurement device. This piece of equipment comes together with an extensive PC software and 3.5-inch TFT touchscreen LCD display combined with SCI and SCE supported 8mm aperture, 256 image element double arrays CMOS image sensor and D/8 geometrical optics that conform to tails such as CIE No.15, GB/T 3978 and ISO7724/1 above others makes this GAOTek Spectrophotometer perfect both for professionals and beginners. Other features include large-capacity storage space for over 20,000 measurements and long-lasting Li-ion battery, as well as automated camera locating function for better positioning and extremely convenient USB port and Bluetooth compatibility. GAOTek Color Spectrophotometer with Customized Aperture can be used in color transferring and matching in cosmetics, printing and textile and garment industries above others.

  • Surface DC Voltmeter

    SVM2 - Alpha Lab, Inc.

    The SVM2 has high sensitivity (resolution), and can detect even a 1 volt charge anywhere within its full range of +29,999 to -29,999 volts. Thus it is easy to measure whether a given process is increasing or decreasing the static electricity present, even if the increase or decrease is by a tiny fraction. The meter reads the actual static signal, but it also captures and stores the highest positive and highest negative signals that were experienced since the last time that the "Reset" button was pressed. These peak + and can be displayed at any later time. The peak function has a "window" time of 0.005 seconds (which is much faster than the display) so even very quick peaks are captured and stored. There is also a user-settable alarm. The alarm will sound if the signal (whether + or -) ever exceeds the value set by the user for at least 0.005 seconds. The alarm can be reset or muted at any time.

  • Turnkey Solution for Unattended Noise Monitoring

    NoiseScout - NTi Audio AG

    NoiseScout provides a comprehensive but easy-to-use 24/7 noise monitoring solution. Noise levels are recorded on-site by the XL2 Sound Level Meter and are available online for monitoring and download. NoiseScout is aimed at both short term noise assessments and long term monitoring applications. During acquisition, automated email alerts allow noise issues to be addressed before a non-compliance condition arises. NoiseScout displays the noise levels measured by the XL2 Sound Level Meter live in your web browser. The measurement data recorded out in the field is presented online in charts and dashboards. Multiple noise level meters can be monitored simultaneously within the map view, thus providing localized geographic visualization for all noise levels at a glance. Identified users can access all their projects, control their monitors or create basic view modes, allowing stakeholders to oversee their noise level data.

  • Ultrasonic Flaw Detector

    Mitech Co., LTD.

    Digital ultrasonic flaw detector, Mitech concentrated years meticulously developed main product. Unique design, sophisticated manufacturing, convenient operation, powerful function, It takes many advantages in one unit. It had received customers' favored since its inception. It can test, orient, evaluate and diagnose various flaws such as crack, lard, air hole in workpiece’s interior swiftly and accurately without any destruction. With full digital 640X480 TFT LCD display, it can select the operating interface style and the LCD brightness according to environment. With humanizing interface design, the waveform show delicately. It can find the defects clearly in full screen. Single hand capable for holding operation, the curve making, probe calibration and other conventional operation can be completed automatically. Core processor CPU with 400M main frequency, it can complete the complex run quickly and realize intelligent defect analysis.

  • Ultrasonic Hardness Tester

    Mitech Co., LTD.

    Non-destructive ultrasonic hardness tester, based on the principle of ultrasonic vibration sensor rod, can easily detect a variety of metal materials hardness without damage. Its measurement speed and precision is high and there will be no indentation. It uses advanced sensing system and single chip technology, better than the traditional ultrasonic hardness testers in structure and function. MU200 support value conversion among HRC,HB,HV and others and the multi-point measurement can be averaged. It can also accurately display and print the test results if possible. The product is widely used in hardness testing of finished workpiece, metal foil, metal thin layer (nitriding layer, carburizing layer, electroplating layer, etc.), difficult to move large parts, easy to dismantle the parts and special shape parts.It is one precision testing equipment to improve production pass rate and cost savings .

  • Video Autoselector

    1154A - Audio Authority Corp.

    Consumers who own a receiver and/or TV with limited inputs can use the 1154A to add multiple A/V sources. Its exclusive Adaptive Signal SensingTM technology uses multiple criteria to decide when to switch sources, and adapts to users’ activity patterns, customizing its switching behavior over time. The high bandwidth circuitry accepts HDTV component video (YPbPr), stereo analog audio, and digital audio in both optical and coaxial formats, and switches all audio and video signals simultaneously when a new source becomes active. Digital audio signals are converted automatically to the desired format. Up to four sources may be connected to one receiver/video display system through the 1154A. A manual select button is provided to override the 1154A’s automatic selection. Multi-color front panel LEDs indicate source availability.

  • Fanless Embedded System With LGA1150 Socket Intel® Core™ I7/i5/i3 & Celeron® Processor, Intel® Q87, 2 HDMI/VGA/DisplayPort, 4 GbE LANs, 6 USB 3.0, Wide Range DC-in And PCIe Mini Card

    eBOX670-883-FL - Axiomtek Co., Ltd.

    The eBOX670-883-FL supports the LGA1150 socket type for 4th generation Intel® Core™ i7/i5/i3 and Celeron® processors (formally codename: Haswell) with Intel® Q87 Express chipset. Under this rich support system, the eBOX670-883-FL allows wide operating temperature ranging from -40°C to +55°C for the most endurable operation. The outstanding embedded controller comes with four 10/100/1000 Ethernet ports, Jumbo Frame (9.5K), PXE Remote Boot, Teaming, and wake-on-LAN (WOL) function to highly enhance its network connection speed. Additionally, the eBOX670-883-FL supports up to three independent hi-resolution displays or a 4K display. Undoubtedly, this rugged fanless embedded computer is the best solution for any industrial field, including host computers, cloud computing servers, multimedia applications, and automation systems.

  • Impedance Meter, Audio, 200Ω, 2KΩ and 20KΩ scales

    72-6948 - Tenma

    Audio impedance tester with 2000 count display.*3 test ranges (200/2K/20Kohm) allow testing of home theatre and commercial sound systems*Convenient portable battery operation*Rotary switch for range selection*Zero adjustment knob*Timer function provides continuous hands free operation*12-month limited warranty *view Terms & Conditions for details