Filter Results By:





illuminates image signaling.

Showing recent results 3001 - 3015 of 3546 products found.

  • Mini Temperature and Humidity Meter

    PTHM15 - Pyle Audio Inc.

    Auto Power OffFast Response TimeDew Point TemperatureDual Display Temperature & HumidityData Hold FunctionHumidity Range: 0-100%RHTemperature Range: -20 - 80 C / -4 - 176 FDew Point Temperature: -20 - 80 C / -4 - 176 FWet Bulb Temperature: 0- 80 C / 32 - 176 FHumidity Accuracy: +/- 3% RHAir Temperature Accuracy: +/- 0.5 C @ 25 CResolution: 0.01% RH, 0.01 C/FResponse Time: %RH: 105 (90% at +25C still air)Battery Type: 9V (Included)Operating Temperature: 32 F to 104 F, <80% RHStorage Temperature: 14F to 140 F, <80% RHDimensions: 6.89' H x 2.28' W x 1.38' DWeight: 5.04 oz.Sold as : Unit

  • Modbus Controllers


    Datexel has a range of Modbus RTU Masters, Slaves, Controllers, Data Loggers and Modbus remote displays. The DAT9000 is a Modbus RTU Master with RS485, RS232 and Ethernet Interfaces. The DAT9000IO is similar to the DAT9000 but it has digital input and outputs. The DAT9000DL has an additional Data Logging facility and the DAT9000DLIO has both Data Logging and digital IO. The DAT9011 is a Modbus Master with 2 analog inputs which can chose from Thermocouple's, RTD's, Potentiometers, mA and mV's. It also has 2 outputs which can be mA or voltage. The DAT9011 can also accept digital inputs and provide 2 SPDT relay outputs. The DAT9011DL also has a Data Logging facility which can store up to 8gb of readings on a thumb drive.

  • Multimeter

    KT7040 - Ketai instrument (kunshan) Ltd.

    *Analogue multimeter in a handy and compact housing*Large display with mirror scale for accurate reading *20 ranges in 4 functions*Manual range selection*AC Voltage measurement up to 1000V(±4% full scale)*DC Voltage measurement up to 1000V(±3% full scale)*DC current measurement up to 10A(±4% full scale)*Resistance measurement up to 20M ohm(±3% full scale)*LED test*Acoustical continuity check*Input resistance: 20K ohm /VDC, 9K ohm /VAC *Overload protection*Power supply: 1x9V,IEC 6F22 2x1.5V,IEC LR6 AA*Fuse: F500mA /250V,10A /250V*EN 61010, CAT II 600V

  • Partial Discharge Meters

    W. S. Test Systems P.L.

    Ours is the most acknowledged name involved in offering different models of Partial Discharge Meters that includes DTM D, DTM Integrated and DTM Modular. Partial Discharge Meters is used for the measurement of partial discharges in pC and RIV in V. Partial Discharge Meters feature variable selective filter ranging from 600 kHz to 2400 kHz. And, the alternatively fixed bandwidth wide band filter is from 40 to 220 kHz. These Partial Discharge Meters have built-in oscilloscope to display PD pulses on elliptical time base and window gating facility to mask unwanted noise. Also, these meters have facility to conduct balance mode PD detection to minimize the background noises. All models conform to IEC60270.

  • Particle Image Analyzer

    DRK-7020 - Shandong Drick Instruments Co., Ltd.

    Determine the melting point to detect the purity of crystal material. Mainly used for determination of medicine, dyestuff, spice, and other crystal organic compounds’ melting point. Using photoelectric automatic detection, dot matrix image liquid crystal-display technology, and digital keyboard input. The instrument can measure three samples at the same time and has the initial melting, final weld automatic display, automatic recording of melting curve, automatically determine the melting point of the mean value function. The temperaturesystem uses highly linear platinum resistance as detection elements and PID regulation technology, improved the melting point’s precision and reliability. The instrument establishes communication with PC through the USB or RS232, printing or saving the curve and it uses capillary Pharmacopoeia as sample tube.

  • PD Test Systems

    Shanghai Himalayal Co.

    1. Number of channels: 2/4 electric signal interfaces & 1 EXT interface 2. Sampling frequency: maximum 200MGa/s 3. Sampling precision: 12bit 4. Range: 0.1mV~20V 5. Range switch: 1mV, 2mV, 5mV, 10mV, 20mV, 50mV, 100mV, 200mV, 500mV, 1V, 2V, 5V 6. Frequency band range: 1Hz-60MHz 7. Range non-linear error: 5% 8. Range of capacitance for test object: 6pF~250µF 9. Power source mode: internal lithium cell / AC 220V 10. Display: 6.5 inches TFT LCD 11. Resolution: 640×480 12. PV: 4GB 13. Hard disk: 32G stiff disk used for storing the test data

  • Portable Spectrum Analyzer

    LP Technologies

    LPT-3000 Portable Spectrum AnalyzerThe LP Technologies LPT-3000 Spectrum Analyzer is a fully synthesized RF Spectrum Analyzer featuring simple user controls which allow the novice or the seasoned expert to use the LPT-3000 right out of box. The LPT3000 provides you with a powerful RF test and measurement tool for CDMA and WCDMA RF systems, broadcast RF systems, EMI/EMC. The features include 6.4 color display, centronics printer, internal memory, USB host, built in CDMA measurement (ACP, Channel Power and Occupied bandwidth). The LPT 3000 Spectrum Analyzer gives educational institutions, mobile and communication system manufactures and RF product service centers a quality RF test instrument at an unbelievably affordable price.

  • Protocol Intelligent Pressure Transmitter

    HR3288Hart - HighReach Measuring & Controlling System Co.,Ltd

    The HR3288 HART protocol intelligent pressure transmitter is a high-precision, high-stability, multi-parameter, 4-position, half-LCD display intelligent pressure measurement product that complies with the HART protocol. Users can use the HART communicator to manage, adjust Or monitor process variables for HART instruments running in the process, or use the buttons for on-site configuration, which is easy to operate.This product adopts the latest application results of digital technology in the field of sensor manufacturing, combined with the most advanced pressure transmitter design and manufacturing technology, precision digital temperature compensation and nonlinear correction technology, safe and reliable explosion-proof structure design and standardized signal output , precision high, wide range coverage, suitable for places where precise measurement of fluid pressure is required.


    3013 - LBA Group, Inc

    LBA Technolog offers a cost-effective SWR Analyzer covering all Cellular and radio communication bands 30-2700 MHz. This analyzer measures transmition & antenna impedance, frequency, SWR, return loss, and bandwidth by sweeping band of interest. The LCD Display works in direct sunlight and with backlight in dark areas. It has a built-in synthesized RF sweeping source and measured results can be stored for further analyzing and documentation on internal and external storage media. Time stamp and operator ID is possible including all in one analyzing for antenna tuning and control. It is a cost-effective SWR Analyzer covering all major Cellular and mobile radio communication bands. SWR TRUE 3013 Antenna Analyzer gives you quick and reliable trouble-shooting capabilities

  • Test Bench for AC Compressors

    MS111 - MSG Equipment

    The test bench is intended to test AC compressors of wide range of vehicles on R134a refrigerant. The equipment detects failures of a vehicle unit before its mounting in a car, whether it is a remanufactured, repaired unit or a used one. In the process of testing, data is shown on LCD display. It gives an opportunity to follow testing results realtime, save and/or print them due to software special features. Unit fixation mechanism is very flexible: a compressor can be easily fixed, no matter what kind of fittings it has. Units with electromagnetic clutch or electromagnetic valve can be tested both separately and simultaneously. Peculiar features of electric commutation are considered, connection polarity is identified automatically, indicator on the control panel indicates on presence of a diode in a circuit.

  • USB Controlled Multi-Function DAQ For ATE Education And ATEasy Training

    GT98901 Series - Marvin Test Solutions, Inc.

    The GT98901 Demo board is a USB controlled, cost-effective, multi-function PCB assembly. The module is completely self-contained and includes an LCD display, measurement and stimulus resources, digital I/O, relays, and switches – all of which can be accessed and monitored via the USB port using a SCPI command set via a USBTMC interface which supports the USB488 protocol. Power for the board is provided via the USB interface, providing a totally self-contained assembly which can provide users with a simple yet complete vehicle that replicates many of the stimulus and measurement functions associated with ATE systems. When combined with Marvin Test Solutions' ATEasy® Test Executive and Test Development environment, the GT98901 is the ideal product for creating and supporting ATE training and education applications.

  • Vickers Hardness Tester

    Mitech Co., LTD.

    Digital vickers hardness tester, based on the principle that positive quadrangular pyramid diamond indenter presses the surface of the sample to produce indentation.By measuring the diagonal length of the indentation to achieve the measurement of the hardness of the material can be for small specimens, thin specimens, surface coating, heat treatment of the workpiece surface Vickers hardness test. With stable performance, strong structure, high reliability, simple operation, adopt digital display and high magnification optical measurement system, adjust the cold light source, photoelectric sensing technology and computer-aided means it has a powerful function. It is widely used in the fields of metal processing, electronics industry, mold parts, watch manufacturing, engineering quality inspection and so on. It is an ideal hardness tester for material research and testing.

  • Automatic Asphalt Content Tester

    Atico Export

    4000g sample capacity, integrated +0.1gm accuracy weighing scale, High temperature ceramic filtration system and afterburner for accurate measurement of bitumen content in asphalt mixes. Automatic operation through user defined automatic end point detection and 24 hour start timer. User defined control of furnace chamber temperature from 200 – 650oC, Digital display and printing of test data through bright LED displays and integrated printer, Software activated mechanical door lock to prevent door from opening during test process and cutting off power from the heating elements upon opening the door. Operates on Single Phase, 220V, 50 Hz, 20 Amp and consumes less than 5000 W.

  • Benchtop Digital Multimeter

    MDM-8145A/MDM-8146A - Matrix Technology Inc.

    4½ digits, 22000 counts.Dual parameter display: display two parameters of the same input signal.Measurement rate: FAST (7 times / sec), MID (5 times / sec), SLOW (2 times / sec).Trigger mode: Automatic trigger, single trigger, external trigger(optional).Range switching mode: Auto / Manual.12 basic measurement functions: AC and DC voltage, AC and DC current, two-wire / four-wire resistance, period / frequency, diode, on-off test, capacitance, duty cycle.DCV basic accuracy: 0.05%.Mathematical functions: MX+B/MAX/MIN/dB/dBm/Rel/Comp Hi/Comp Low/ Statistics.Additional functions: Data hold, data record, data readback.keys can be locked.Open calibration function.Square wave output.(Optional.)

  • Programmable & Multiple Channel - DC (Power Supply)

    PST-Series - Digital Communication Technologies Ltd

    The PST series are 3-channel, 96 or 158W, programmable linear DC power supplies. High resolution, maintained at 10mV, 1mA ( 3A). OVP, OCP, and OTP, protects the PST-Series and its loads from unexpected conditions. The PST Series are capable of independent, series, or parallel operation for increased flexibility. The large LCD display conveniently displays all outputs and configurations simultaneously to simplify operation. The programmable interface allows automatic stepping, 100 set of memory, and comprehensive timing operations. GPIB and RS232C interfaces, Labview driver,s and SCPI compatibility allow easy ATE software development and remote control. The versatile PST-Series is ideal for high resolution, multiple output, and automated operations such as production testing and rack mounting systems.