Filter Results By:

Products

Applications

Manufacturers

Display

illuminates image signaling.


Showing recent results 2386 - 2400 of 3494 products found.

  • Premanaged Gigabit Ethernet Switch

    XES-2T6 - SWISSON ag

    The XES-2T6 is a six plus two port Gigabit Ethernet switch with two ports being aggregated to a high throughput, redundant trunk link. The six other ports are individually assignable to groups (IEEE 802.1Q VLANs) that may participate in completely independent networks that do not interfere with each other. Thanks to the graphic OLED display, the encoder knob and a push button for each of the six configurable ports, the switch is intuitive to setup and the configuration is done in next to no time.

  • PX Powerstations

    Compumotor Division of Parker Hanni

    The new line of PX Series PowerStations are available with 10", 12", 15", or 18" display options and up to 1 GHz CPU processor. With InteractX Windows HMI software, factory-installed and tested on PX Series units, there's no need to integrate hardware and software products from different suppliers. This "out of box" Windows HMI solution makes it easy for your designers, field service and manufacturing personnel.

  • Rebound Hammer

    DigiSchmidt - LD - PASI srl

    The Schmidt Hammer Digi-Schmidt Type LD  was developed for the non destructive measurement of the concrete compressive strength and controlling the uniform concrete quality. Besides showing the basic settings on the included display unit, the Schmidt Hammer offers the transmission of the measured data to a standard printer or to a PC. This supersedes the time consuming business of note taking allowing the user to focus on the essential. The window based software ProVista allows downloading, presenting and editing of the measured values in a fast and easy way.

  • Rebound Hammer

    DigiSchmidt - ND - PASI srl

    The Schmidt Hammer Digi-Schmidt Type ND  was developed for the non destructive measurement of the concrete compressive strength and controlling the uniform concrete quality. Besides showing the basic settings on the included display unit, the Schmidt Hammer offers the transmission of the measured data to a standard printer or to a PC. This supersedes the time consuming business of note taking allowing the user to focus on the essential. The window based software ProVista allows downloading, presenting and editing of the measured values in a fast and easy way.

  • Scopes

    SmartView Duo 4K - Blackmagic Design Pty. Ltd.

    The SmartScope Duo 4K model includes built in waveform monitoring when you need to analyze image quality more accurately than simply looking at the picture! You get seven of the most popular scopes most widely used in broadcast and post production facilities. Scope displays include waveform, vectorscope, RGB parade, YUV parade, histogram, audio phase and level scopes, and of course you can simply select to view the video itself!

  • Sound Level Meter

    831C SoundAdvisor - Larson Davis, Inc.

    The SoundAdvisor Model 831C Sound Level Meter is designed to make noise measurement easy. Due to its color display, connectivity, extensive software features and small form factor the SoundAdvisor is an ideal choice for handheld operation. Attended measurements are simplified, with the ability to control and monitor data via any PC or mobile device with a standard web interface. Designed with the acoustic professional in mind, the SoundAdvisor offers an elegant solution for complex needs in an easy to use system.

  • Spectral Domain Signal Analyzer

    Baudline - baudline

    Baudline is a time-frequency browser designed for scientific visualization of the spectral domain. Signal analysis is performed by Fourier, correlation, and raster transforms that create colorful spectrograms with vibrant detail. Conduct test and measurement experiments with the built in function generator, or play back audio files with a multitude of effects and filters. The baudline signal analyzer combines fast digital signal processing, versatile high speed displays, and continuous capture tools for hunting down and studying elusive signal characteristics.

  • Spectrum Analyzers

    T3SA Series - Teledyne LeCroy

    Teledyne Test Tools new T3SA3000 family of Spectrum Analyzers offers a frequency range of 9 KHz to either 2.1/3.2 GHz alongside many impressive features. With their light weight, small form factor, and user friendly interface, these Spectrum Analyzers take powerful and reliable automatic measurements that are presented on a large, bright, easy to read touch screen display. Typical uses for the T3SA3000 series are research and development, education, production, maintenance, and pre-compliance testing.

  • Transmitter Control Subsystem (TCS)

    Loran C Accufix 7500 - BCO, Inc.

    USCG Loran Transmitter Control and Display stations modernized and upgraded to state-of-the-art processor controlled technology. Fully redundant system with comprehensive built-in performance monitoring. Automatic switchover upon detection of error, high single point failure tolerance. Long distance communications link supports remote station operation on a continuous basis. Built-in fault detection and monitoring enables dynamic re-allocation of failed subsystem modules, and fault isolation to major replacement assemblies.

  • Ultrasonic Wind System

    UWS - Aeronautical & General Instruments Ltd.

    Data from the mast-mounted (and virtually maintenance-free) anemometers is processed and used to drive full colour displays. The system calculates cross winds, head winds and tail winds, gusts and lulls and directional variation, as well as allowing for marked discontinuities. Instantaneous data may be displayed, as well as 2 minute and 10 minute averages.The UWS can operate as a stand-alone system or integrate to an AWOS.Systems can be supplied fully installed with comprehensive engineering and operator training, and post-installation support is available worldwide.

  • Video Graphics/Time Inserter

    6225GCR - Instrumentation Technology Systems

    An internal clock is controlled by the GPS receiver. Once the time is established, a loss of GPS lock will cause the 6225GC to automatically switch to the internal clock that will increment the time display until the GPS signal is re-acquired. The default format is UTC time. It is also possible to program a time offset to convert from UTC to local time. This offset is entered via the keyboard or RS-232 port. All configuration and programmed values are stored in non-volatile memory and remain until overwritten.

  • Video Pattern Generator

    6113B - Instrumentation Technology Systems

    Generates RS-343, 875/60 line video signal source for use in setup and performance test of video monitors, recorders and other video processing equipment. Three separate simultaneously operating video outputs are provided. Each output may be configured to provide either one of two patterns or a reference signal which produces a blank image on a display. Either pattern or the reference signal may be selected by front panel switches or remotely via a control port.

  • Voltage Testers

    Morris Products Inc.

    Electrical Receptacle Tester Instantly Displays Wiring Condition of Any Standard 3-Wire AC 110-120 OutletNeon Indicators Give Positive Indication of Current StatusCompact Unit Simply Plugs into any Standard 3 Wire/Grounded Receptacle (110–125 Volt AC Circuits)Tests for 6 Circuit Conditions: Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse & Correct WiringBlister PackedcULus ListedOrder Qty of 1 = 1 Piece

  • Waterproof Portable Meter

    EW-35630-10 - Cole-Parmer Instrument

    Select meter with combination pH/conductivity/temperature probe or separate pH and conductivity/temperature probesIntuitive, user-friendly icons—electrode status displays pH slopeGrip-Clip™ electrode holder quickly and easily secures electrode to side of beaker or container (for use with separate pH and conductivity/ATC probes)Memory of 500 data sets and USB or RS-232 output for tranfer to PCExtended battery life or optional universal power adapterBuilt-in stand with wall mount allows for easy benchtop measurement or storage

  • Analog Oscilloscope

    Eston Instruments Ltd.

    CRT: 6 inches rectangular screen with internal graticule, 8*10div (1 div=25px).- Vertical deflection- Display mode: CH1, CH2, CH3, ADD, ALT, and CHOP- Deflection factor: 5mV/div to 5V/div±3 %,( 1mV/div to 1V/div±5% at*5), 10steps.- Rise time: ≤17.5ns- Max. Input voltage: 40v (DC+AC peak value) when≤1KHz- Input coupling: AC, DC, Grounding- Polarity selection :±( CH2 only)