Filter Results By:





illuminates image signaling.

Showing recent results 1876 - 1890 of 3537 products found.

  • UV Meter


    This affordable UV meter detects both atmospheric UV-A and UV-B light ranging from 400 nm to 280 nm. It displays the current atmospheric UV index and the UV Irradiance. UV-A and UV-B are the UV rays that penetrate the atmosphere. A graphical meter alongside a UV color code chart makes it easy to determine the level of UV risk.

  • Vehicle Pressure Acquisition System

    VPAS - Validyne Engineering

    The Vehicle Pressure Acquisition System (VPAS) is designed to record and display up to 8 or 16 low pressure measurement points for the investigation of vehicle pressures within the passenger cabin, in HVAC ducting or with respect to the exterior of the vehicle. Validyne DP103 pressure sensors can be ordered with full scale ranges as low as 0.1 in H20 and up to 55 in H20.

  • Video Test Generator

    882D - Teledyne LeCroy quantumdata

    The Teledyne LeCroy quantumdata 881D/882D is programmable video test generator packed with features for video and audio testing of HDMI, dual link DVI, high speed analog displays (up to 400MHz) and a composite analog output for testing standard definition TVs. The HDMI output also supports 3D testing in accordance with HDMI 1.1 standard.

  • Wire Harness Tester

    NX Solo - Dynalab Test Systems, Inc.

    The Dynalab NX Solo Wire HarnessTester is a low-cost, feature-packed, stand-alone tester with a maximum capacity of 256 test points. The flexibility of the NX System allows each program to perform multiple tests, display custom messages or sounds, and analyze the results of a test or an input to decide which operation to perform next. Testing for continuity, shorts, and a variety of components.

  • Measuring and Test Devices

    ProfiMessage D - Delphin Technology AG

    With a ProfiMessage D device, you can immediately begin using a optinal PROFINET interface as well as communicating to third-party systems via an OPC UA Server/Client. The device is also equipped with a display to show important configuration and measurement data. Other special features include universal sensor inputs, high-level data security, and a diverse range of interfaces.

  • Precision LCR Meter


    320*240 dot-matrix large graphics LCD display. Dendriform operation structure with softkeys. Test speed up to 200kHz can be programmed with 0.01Hz steps. 0.05 test accuracies. Measuring with 9 ranges,ensuring high accuracy,stability and identity. 2 different signal source output impedances with 30¦¸¡¢100¦¸ Open/Short/Load correction functions

  • Gas Detection Controller

    MVR-SC - Bacharach, Inc.

    The Bacharach MVR-SC Gas Detection Controller provides centralized monitoring and alarming for multi-occupant applications utilizing the MVR-300™ VRF Refrigerant Gas Detector. The MVR-SC continuously monitors all connected gas detectors for alarm and fault conditions, and will provide alerts via the integrated color touchscreen display, integrated buzzer, and on-board relay outputs.

  • HPC50 Series Pressure Calibrator

    AMETEK Sensors, Test & Calibration

    The HPC50 handheld pressure calibrator is an intrinsically safe, dual pressure calibrator with options to add an additional two external pressure or temperature modules. The HPC50 pressure calibrator combines the features you love from the HPC40 with improvements like, better battery life an improved display, an extra external module connection, and of course intrinsic safety.

  • Marine Thermal Monitoring System

    FLIR AX8 - Teledyne FLIR

    Gain an entirely new view of your vessel''s mechanical system with the new FLIR AX8 thermal monitoring camera. Combining thermal and visible cameras in a small, affordable package, the AX8 integrates with Raymarine multifunction displays (MFDs) and sends audible and visual alerts when the temperature of machine parts rise above preset thresholds.

  • Cable Tester, HDMI Cable, Handheld, Height 102mm, Width 95mm, Depth 27mm

    72-13550  - Tenma

    *HDMI cable tester with LED status display*Tests for normal/short/open/crossover circuit*Scan/full display testing modes conversion*Single key operation*Manual/auto power off (after 10 minute inactivity)*Low battery indication < 7.2V*HDMI/HDMI-mini interface*9V battery (6F22)*12-month limited warranty *view Terms & Conditions for details

  • 1 Phase TRMS Power Clamp-on Meter With PC Interface

    KM- 351 - KUSAM-MECO

    • Ultra-Slim jaw to access tight places. • 600A AC Clamp-on + Multimeter ranges • 600V AC/DC input protection on all functions • AC True RMS Voltage and Current functions. • Balanced-Load 1-phase Power W, VA & • VAR measurements. • Dual display Power Factor (PF)& A-Lags-V Phase-Shift indication • AutoVATM (Auto Selection on ACV, DCV or ACA functions) • Power measurement of Selectable W, VAR & VA with dual-display Total Power Factor features.. • Display PEAK-rms HOLD & Data Hold function. • Fast Peak-rms Hold (65ms to 90%) for In-rush ACA& ACV readings. • Measure line-level ACV Frequency via test leads • Measure non-invasive ACA frequency via clamp jaws. • Battery Cover with probe holders. • Fast Audible Continuity. • PC-Comm computer interface capabilities (Optional).

  • Battery Monitor

    BAF-M2 - Schumacher Electric Corporation

    BATTERY MONITOR• Plugs into a 12 volt automotive cigarette lighter receptacle• Allows instant monitoring of battery & charging system voltage• Constant automotive battery and charging system check with a digital readout• LED warning lights alert you when your battery or charging system is not functioning properly• Detects charging input voltage within 0.1 volts variance• Detects problems with the alternator, diode and any variance of more than 0.8 volts• Alerts you once battery drops to 12.0 volts giving you approximately one more hour of run time, depending on the system’s wattage• Digital display indicates electrical voltage of your battery• Mounted display on your car’s dashboard for constant monitoring of your electrical system Contents: (1) Battery Monitor with 12V DC plug

  • Digital Clamp Meter

    M266 series - Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD

    M266 · DC Voltage: 1000V ± 0.8% · AC Voltage: 750V ??.2% · AC Current: 200 - 600A ±2.0%, 600 ~ 1000A ±3.0% · Resistance: 200Ω, 20KΩ±1.0% · Continuity check: Built in buzzer will sound · Data hold · Display: LCD size 15 x 47 mm · Dimension: 70 x 230 x 37mm · Weight: 310g M266A · DC Voltage: 2 / 20 / 200V ± 0.5%, 1000V ± 0.8%· AC Voltage: 200V ± 1.0% 750 ± 1.2%· AC Current: 200 ~ 600A ± 2.0%, 600 ~ 1000A ± 3.0%· Resistance: 200Ω, 20KΩ, 2MΩ ± 1.0%· Frequency: 2KHz±3%· Diode Test: Check forward or reverse· Continuity check: Built in buzzer will sound· Peak hold     (Special function) · Display: LCD size 15 x 47 mm· Dimension: 70 x 230 x 37mm· Weight: 310g

  • Digital H.V. Insulation Tester(5kV)

    6304 IN - Standard Electric Works Co., Ltd

    ● 2 Lines × 16 Characters LCD● Microprocessor-controlled● Tests insulation resistance up to 10 TΩ● 4 Insulation test voltages: 500V, 1000V, 2500V, 5000V● AC / DC Voltmeter (30~600V)● Short-circuit current up to 1.9mA● PI (Polarization Index) indication● DAR (Dielectric Absorption Ratio) indication● Auto-ranging on all insulation ranges● Optical USB to RS-232 data transmission● Well isolated from contact● Well protected from surges● 2 built-in optical LEDs for data transfer● Visual and audio warning of external voltage presence (≥30Vac or ≥30Vdc)● Auto-hold function to freeze reading● Overload protection● Adjustable testing duration: 1~30 minutes● Internal memory for data storage● Displays testing duration for insulation measurement● Auto-off function● 200 measurement results can be saved in memory and recalled on display

  • Digital LOOP/PSC/EARTH Tester

    1824 LP - Standard Electric Works Co., Ltd

    ● Microprocessor-controlled.● Measures Earth Resistance without the need for poles    in the ground or external measuring wires.● Earth measurement uses the real earth current path   and the current generated by the electric network,   without the need for any disconnection.● The Earth Resistance displayed is exactly the earth   resistance that the earth current will need to go   through if an earth fault occurs.   (you do not need to add all the bonding points and    connection paths)● Displays voltage supply at the transformer(Line to   Neutral), without loading the transformer.● Single one smart push button operation; ON, Scroll   through results and menus.● Checks wiring integrity (LEDs).● Auto-off / Auto-ranging (software range).● Color-coded test leads.● Combined prospective short circuit current, loop, and   earth tester.● Loop test for L-E and PSC between L-N.● Voltage test L-N.● Display can be customized for large orders.