Showing results: 481 - 495 of 573 items found.
-
Extech MO57 -
Extech Instruments Corporation
Take pinless (non-invasive) Moisture measurements on wood and building materials without damaging the surface with the depth of approx <4" (100mm) with Extech’s MO57 Moisture Meter. The ball moisture sensor provides smooth gliding on hard or delicate surfaces. Easy-to-operate with display icons that indicate the levels of moisture content plus audible alert feature. Ideal for building restoration projects and applications where moisture detection on floors, tiles and under carpets is critical. A musthave tool for analyzing the after-effects of water leakage behind walls and in ceilings and also measuring moisture content on a non-flat surface.
-
SHS800X Series -
SIGLENT Technologies
The SHS800X series has two non-isolated scope channels and one isolated multimeter channel. Available in 100 and 200 MHz versions, all feature a single ADC with 1 GSa/s maximum sample rate and a single memory module with 12 Mpts memory depth. When two channels are enabled, each channel has a sample rate of 500 MSa/s and a standard record length of 6 Mpts. When only a single channel is activated, the maximum sample rate is 1 GSa/s and the maximum record length is 12 Mpts. For ease of use, the most commonly used functions can be accessed with its user-friendly front panel design.
-
Antenna Technology Communications, Inc.
C-Band Gain - 4 GHz 42.3 db• Ku-Band Gain - 12 GHz 51.1 db• Beamwidth -3 degrees db 4 GHz 1.4 degrees• Beamwidth -3 degrees db 12 GHz .48 degrees• Isolation Port - Port db 35• Antenna Characteristics Weight Raw 207 pounds• Size Pre-Spun 148 inches• Size Post-Spun 142.25 inches• Depth 20.5 inches• Area 113 sq. ft.• Focal Length - F/D Ratio 57.6 inches - .4• Wind Load Survival 125 mph• Operational - 4GHz 75 mph• Operational at 12GHz 60 mph
-
Guangdong Bell Experiment Equipment Co.,Ltd
Sea Water Immersion Test Device Relevant standards requirement:Test Object: Battery storage pack or system.The test object connects all the wiring harness, connector and other parts according to the whole vehicle connection mode. Select one of the following two methods to operate test at the room temperature.Immerse the test objects (in the direction of real vehicle assembling) into 3.5% NaCl solution (mass fraction, simulated under normal temperature water composition) for 2 hours. The water depth is to be sufficient to completely submerge the test objects.Test objects according to GB/T4208-2017 part 14.2.7 test method and test process.
-
Profoscope -
PASI srl
The Profoscope is a versatile, fully-integrated rebar detector and cover meter with a unique real-time rebar visualization allowing the user to actually “SEE” the location of the rebar beneath the concrete surface to a maximum depth of 180 mm. This is coupled with rebar-proximity indicators and optical and acoustical locating aids. Rebar diameter can also be estimated within the specified testing range. The Profoscope combines these unique features in a compact, light device that allows the user to operate this rebar detector with one hand making the task of locating rebars a simple and efficient process. In addition, Proceq’s rebar detector convinces through its intuitive user interface making rebar detection easy.
-
IRIS Instruments
The Syscal Pro is an all-in-one multinode resistivity and induce polarization sounding and profiling system for environmental and engineering geophysical studies. The Syscal Pro gathers a 10 channels receiver and a 250 W internal transmitter which make it the more powerful system of the Syscal range. Compact, easy-to-use and field proof, the Syscal Pro measures both resistivity and chargeability. It is ideal for environmental and civil engineering applications such as depth-to-rock determination, weathered bedrock mapping. With a maximal output voltage of 2000Vpp, the Syscal Pro is very adapted to detect deep fault in fractured aquifers or to characterize the depths and thickness of the groundwater aquifers.
-
VM-850 -
Vivax-Metrotech Corp
Using the correct frequency makes a world of difference when locating buried utilities. The depth of the utility, size, material, and amount of congestion (proximity of other utilities) all need to be taken into consideration for the correct frequency selection. Large diameter, direct buried pipes with bell housing ends that use insulators and rubber gaskets, such as water or gas require a higher frequency while smaller diameter, well-grounded direct buried or long distance in conduits work, better with a lower frequency. The VM-850 operates at a much lower frequency of 9.82kHz which is ideal for smaller diameter utilities such as CATV, power and telephone with less bleeding onto adjacent services.
-
Alliance Calibration
123 BLOCKS ANGLE BLOCKS BALL BAR BORE GAGE CALIPERS CHAMFER GAGES CMM'S COATING THICKNESS GAGES CYLINDER PLUGS DEPTH GAGES GAGE BLOCKS GO-NO-GO GAGES HARDNESS TESTERS HEIGHT GAGES INDICATORS LENGTH STANDARDS LEVELS MICROMETERS OPTICAL COMPARATORS PARALLELS PIN GAGES PROFILOMETERS RADIUS GAGES ROUGHNESS SPLINES THREAD RINGS THREAD PLUGS
-
Megger Group Ltd.
The need for a comprehensive current transformer testing regime is evident when the alternative is considered: a catastrophically damaging current transformer fault. A fault leading to an open secondary could cause the primary current to overwhelm the insulation, causing the winding to short circuit. Megger’s range of current transformer test equipment allows you to construct an in depth test and maintenance programme to prevent problems before they occur.
-
Chroma ATE Inc.
Support 8K SHV (Super Hi-Vision 7680x4320 / 8192x4320)Support full 8K scrolling functionIndependent signal and power module designDual-core graphics processing architecture - Increase graphics and data transmission performance - 8K Super Hi-Vision images switch in less than 200msSupport 6/8/10/12 bits color depth (12 bit only in LUT mode)Support user edited test patterns - BMP pattern format - Maxi. 300 of 8Kx4K bmp patternsSupport VDIM and PWM dimming functionSupport cross coordinates defect positioning functionSupport auto flicker adjustment (with A712306)Support gigabit Ethernet control interfaceSupport USB port for data update
-
HM2000 -
Helmut Fischer AG
Ample load and depth range; can be used for a broad range of applications from polymeric automotive clear coats to cermaic diamond-like carbon coatingsMotorized z-axis and fully automated surface detection for higher productivityEnhanced high resolution optical system with autofocus and multiple objective turretCustom granite structure for enhanced frame stiffness and low noise floorMeasure on smallest structures, cross-sections with high precision programable X/Y-tableMinimal sample preparation due to large working area and open layouMeasurement of dark surfaces without sample pretreatmentVickers, Berkovich or spherical indentors are availableOptional: active damping table to reduce influence of vibrationsEasy operation through the customizable WIN-HCU Software
-
PCI-E 20 Slot 4U -
Comtel Electronics
The brand-new PCI-E server platform features 20 fully-fledged PCIe card slots along with a built-in CPU card based on double Intel® Xeon® CPU. This powerful CPU card and x16 PCI-E (Gen3) available to all 20 slots unleash the unprecedented performance in a very compact 19″ form factor with only 4U height and 20” depth. A big selection of commercial off the shelf (COTS) PCIe cards, such as GPU, Flash storage, FPGA, DSP cards, etc. enables a variety of system configurations. The platform is ideally positioned for high performance computing (HPC), deep learning, artificial intelligence (AI), high-end storage, and other applications.
-
CTS Valpey Corp.
Piezo elements are used in military and commercial sonar systems for position finding activities. Location of surface and subsurface vessels, depth measurement, surveying, fish location, and communication are several of the more common sonar applications. Piezoelectric ceramic materials have high bandwidth and can quickly respond by applying high force at low power levels. These materials are generally unaffected by environmental factors such as humidity and temperature. CTS materials can be formed to customer specifications and are available in a wide range of geometries with dimensions up to 150 mm or thicknesses less than 100 microns. Our materials sustain high levels of drive voltage and provide excellent coupling factors in sonar applications.
-
PCS-800 -
Schonstedt Instrument Co.
The NEW PCS-800 pipe/cable and sonde locating kit consists of a portable, holstered pipe and cable locator, a 512 Hz sonde and various accessories. The instrument is capable of detecting all buried metallic pipes or cables, by direct connect or inductive means.Choice of two sonde models based on depth range and inside diameter of pipe. Either of the two available 512 Hz sondes allow sewer inspection crews to pinpoint blockages or areas needing repair inside a pipe. In combination with an insertion device such as a push or tractor-style camera, clean-out rodder or plumbers snake, the mini sonde or beacon emitting a 512 Hz signal is traced above ground with the XTpc receiver.
-
HelixQAC -
Perforce Software Inc.
For over 30 years, Helix QAC has been the trusted static code analyzer for C and C++ programming languages. With its depth and accuracy of analysis, Helix QAC has been the preferred static code analyzer in tightly regulated and safety-critical industries that need to meet rigorous compliance requirements. Often, this involves verifying compliance with coding standards — such as MISRA and AUTOSAR — and functional safety standards, such as ISO 26262.
