Filter Results By:

Products

Applications

Manufacturers

Continuous Waveform

Wave having a constant amplitude and frequency.


Showing recent results 1 - 15 of 36 products found.

  • Function Generator

    SG-4115/SG-4105/SG-4104 - IWATSU Electronic Co., Ltd.

    High accuracy (10ppm: SG-4115, 50ppm: SG-4105, SG-4104) and high definition waveform output by employing DDS (Direct Digital Synthsizer) system. Easy operation (set performance can be checked at a glance). 2 channel outputs and arbitrary waveform output function (SG-4115). Continuous change of frequency while keeping phase difference between channels (SG-4115)

  • Digital ESU Analyzer

    ESU-2050P - BC Group International Inc.

    Calibration quality analyzer; uses external precision non-inductive test loads and wide band current transformer. The Pulsed Model is compatible with all continuous output generators (same as standard model), plus generators with pulsed output waveforms.

  • Full Wave Recorder

    V-FullWaver - IRIS Instruments

    The V-FullWaver systems were specifically developed for precise full waveform time domain Induced Polarisation, Resistivity and SP measurements. Each system is fully independent; incorporating its own power source, GPS module and digital memory for up to 3 months continuous recording.

  • Full Wave Recorder

    I-FullWaver - IRIS Instruments

    The I-FullWaver systems were specifically developed for precise full waveform time domain induced polarisation, Resistivity and self-potential measurements. Each system is fully independent; incorporating its own power source, GPS module and digital memory for up to 3 months continuous recording.

  • 3-Phase Class A Power Quality Analyzer

    G4400 - Computec SRL

    The BlackBox G4400, the best power quality analyzer on the market today, is equipped with the revolutionary PQZIP patent algorithm for continuous waveform recording. This most advanced analyzer allows you to easily predict, prevent and troubleshoot an incident, without the need to set any triggers or thresholds to capture a specific event.

  • Oscilloscopes

    all-sun

    *Screen Display 60mm×80mm Screen 240 Dot×320 Dots*Backlight Adjustable Save 6 Groups Of Waveforms And 10 Groups of parameters*Dual Channel, Bandwidth 20 MHz*The auto set function, continuous fully automatic adjustment of amplitude range and time base.*Waveforms and waveform parameters can be displayed on the screen at the same time. The user can choose parameters (such as RMS, peak to peak, means, frequency, period and so on) according to the needs.*With 100Msa/s real time sampling rate each channel and 20MHz bandwidth. It can reflect the waveform state quickly and factually, catch the fault impulse with the least breadth of 10ns.*Saving and recalling function. It can save six groups of waveform data and ten groups of parameter setups.*High distinguishable crystal display. It can display the details of the waveform distinctly.*With compact, convenient, full functional operating menu.*It can be portable with lighter, smaller, only 0.7kg weight.*Supplied with Ni-battery. It can be used under all kinds of environments constantly.

  • Vector Signal Generator

    PXIe-5673E / 781340-02 - NI

    6.6 GHz PXI Vector Signal Generator—The PXIe‑5673E is a wide-bandwidth module that, when combined with the appropriate software, can generate a variety of signals. With the Modulation Toolkit for LabVIEW, it can generate different waveforms including AM, FM, CPM, ASK, FSK, MSK, PSK, QAM (4‑, 16‑, 64‑, and 256‑QAM), multitone signals, arbitrary waveforms, and many others. In addition, you can combine these vector signal generators with standard-specific software to generate signals for GPS, GSM/ EDGE/WCDMA, WLAN, WiMAX, DVB‑C/H/C, ISDB‑T, ZigBee, and others. With PXIe‑5673E stream‑from‑disk capabilities, you can generate continuous waveforms that are up to several terabytes in length.

  • Vector Signal Generator

    PXIe-5673E / 781263-02 - NI

    6.6 GHz PXI Vector Signal Generator—The PXIe‑5673E is a wide-bandwidth module that, when combined with the appropriate software, can generate a variety of signals. With the Modulation Toolkit for LabVIEW, it can generate different waveforms including AM, FM, CPM, ASK, FSK, MSK, PSK, QAM (4‑, 16‑, 64‑, and 256‑QAM), multitone signals, arbitrary waveforms, and many others. In addition, you can combine these vector signal generators with standard-specific software to generate signals for GPS, GSM/ EDGE/WCDMA, WLAN, WiMAX, DVB‑C/H/C, ISDB‑T, ZigBee, and others. With PXIe‑5673E stream‑from‑disk capabilities, you can generate continuous waveforms that are up to several terabytes in length.

  • Vector Signal Generator

    PXIe-5673E / 781340-04 - NI

    6.6 GHz PXI Vector Signal Generator—The PXIe‑5673E is a wide-bandwidth module that, when combined with the appropriate software, can generate a variety of signals. With the Modulation Toolkit for LabVIEW, it can generate different waveforms including AM, FM, CPM, ASK, FSK, MSK, PSK, QAM (4‑, 16‑, 64‑, and 256‑QAM), multitone signals, arbitrary waveforms, and many others. In addition, you can combine these vector signal generators with standard-specific software to generate signals for GPS, GSM/ EDGE/WCDMA, WLAN, WiMAX, DVB‑C/H/C, ISDB‑T, ZigBee, and others. With PXIe‑5673E stream‑from‑disk capabilities, you can generate continuous waveforms that are up to several terabytes in length.

  • Vector Signal Generator

    PXIe-5673E / 781340-03 - NI

    6.6 GHz PXI Vector Signal Generator—The PXIe‑5673E is a wide-bandwidth module that, when combined with the appropriate software, can generate a variety of signals. With the Modulation Toolkit for LabVIEW, it can generate different waveforms including AM, FM, CPM, ASK, FSK, MSK, PSK, QAM (4‑, 16‑, 64‑, and 256‑QAM), multitone signals, arbitrary waveforms, and many others. In addition, you can combine these vector signal generators with standard-specific software to generate signals for GPS, GSM/ EDGE/WCDMA, WLAN, WiMAX, DVB‑C/H/C, ISDB‑T, ZigBee, and others. With PXIe‑5673E stream‑from‑disk capabilities, you can generate continuous waveforms that are up to several terabytes in length.

  • Vector Signal Generator

    PXIe-5673E / 781263-01 - NI

    6.6 GHz PXI Vector Signal Generator—The PXIe‑5673E is a wide-bandwidth module that, when combined with the appropriate software, can generate a variety of signals. With the Modulation Toolkit for LabVIEW, it can generate different waveforms including AM, FM, CPM, ASK, FSK, MSK, PSK, QAM (4‑, 16‑, 64‑, and 256‑QAM), multitone signals, arbitrary waveforms, and many others. In addition, you can combine these vector signal generators with standard-specific software to generate signals for GPS, GSM/ EDGE/WCDMA, WLAN, WiMAX, DVB‑C/H/C, ISDB‑T, ZigBee, and others. With PXIe‑5673E stream‑from‑disk capabilities, you can generate continuous waveforms that are up to several terabytes in length.

  • Vector Signal Generator

    PXIe-5673E / 781263-03 - NI

    6.6 GHz PXI Vector Signal Generator—The PXIe‑5673E is a wide-bandwidth module that, when combined with the appropriate software, can generate a variety of signals. With the Modulation Toolkit for LabVIEW, it can generate different waveforms including AM, FM, CPM, ASK, FSK, MSK, PSK, QAM (4‑, 16‑, 64‑, and 256‑QAM), multitone signals, arbitrary waveforms, and many others. In addition, you can combine these vector signal generators with standard-specific software to generate signals for GPS, GSM/ EDGE/WCDMA, WLAN, WiMAX, DVB‑C/H/C, ISDB‑T, ZigBee, and others. With PXIe‑5673E stream‑from‑disk capabilities, you can generate continuous waveforms that are up to several terabytes in length.

  • USB

    DAQ - Digital Communication Technologies Ltd

    USBDAQ-9100MS is an 8-CH, 12-bit, 500 kS/s Simultaneous-sampling Multi-function DAQ Module with USB 1.1 compliant interface. Eight analog input channels are differential, with software programmable gain of x0.5, x1, x2, x4, x8 and can accept bipolar or unipolar signals. In addition to traditional automatic analog input scanning, four of the eight channels can be sampled simultaneously up to 500 kS/s, or 100 kS/s for continuous acquisition. The analog outputs of the USBDAQ-9100MS feature up to 500 kS/s update rate at 12-bit resolution. With hardware-base waveform generation and the onboard 511 samples D/A FIFO, it is capable of generating continuous waveforms without taking up USB bandwidth. The USBDAQ-9100MS also features 8-CH isolated digital inputs and 8-CH isolated digital outputs, as well as 2-CH 16-bit general-purpose timer/counters. These enhancements make the USBDAQ-9100MS ideal for standalone data acquisition applications.

  • V-FullWaver

    IRIS Instruments

    The V-FullWaver systems were specifically developed for precise full waveform time domain Induced Polarisation, Resistivity and SP measurements. Each system is fully independent; incorporating its own power source, GPS module and digital memory for up to 3 months continuous recording. The V-FullWaver is a dual channel Induced Polarisation, Resistivity and SP receiver. Continually recording at 10ms sample rate provides a full waveform record. It can be synchronized on the GPS PPS signal, allowing an easy process of the signal. Data on the memory can be downloaded directly on a simple USB stick from all the Fullwavers.

  • VXI DAC/ Waveform Generator

    VM3616A - Digital Communication Technologies Ltd

    The VM3616A provides 16 independent channels of a digital to analog converter (DAC) with 16 bits of resolution. Each channel consists of an independent DAC combined with an output amplifier. Along with static output operation, the VM3616A provides a FIFO mode where the selected channels can accept and output a continuous stream of data. The VM3616A also offers arbitrary waveform generation (AWG) mode which supports sophisticated looping and branching to build complex waveforms without the system controller’s intervention. The data may be paced out of the instrument by using either a user-supplied clock or the internal programmable timer.