Showing results: 1951 - 1965 of 2779 items found.
-
Smiths Interconnect
Smiths Interconnect is committed to providing technically advanced, high quality “state-of-the-art” RF Filters, Multiplexers, Switched Filter Banks, and Integrated assemblies, from 100 KHz to 65 GHz. All products are subject to the same rigorous design, manufacturing, and inspection criteria. Regardless of the application, our internal process and procedures help ensure that all products are fully compliant to all specifications. Our R & D activities are constantly evaluating new materials, plating techniques, and manufacturing processes to offer the highest performing components available today.
-
Teledyne RF & Microwave
Teledyne RF & Microwave IQ Demodulators are fully space-qualified designs providing stringent phase and amplitude matching, and superior output third order intercept performance. To meet high LO and IF rejection requirements diplexers are used at the I and Q ports. All components and processing fully meet MIL-PRF-38534, Class K and MIL-DTL-28837. Teledyne RF & Microwave can provide performance to meet most receiver system requirements, including single or moving LO frequencies and tight phase and amplitude matching. Customers can specify our designs for space, military, or commercial applications.
-
Lt-C/M2020 -
Teledyne Lumenera
The Teledyne Lumenera Lt-C/M2020 camera, like the others in the compact Lt Series, allows for cable connection on the side of the camera instead of at the back. Using the side of the camera for cabling allows for a much thinner vision system because the camera can lie flush against other components. With a 3.2 megapixel resolution and a fast 55 fps frame rate, the Lt-C/M2020 camera captures images in a wide variety of application environments. This form factor is ideal for aerial imaging systems such as, unmanned aerial vehicles (UAVs) by reducing the weight and size of the vision system.
-
Sri Comm Instruments Sdn Bhd
Switching systems are the nerve centre of any telecommunications network, providing interconnectivity for the various users of the network. Sri Comm has been very active in this core component, installing over 40 telephone exchanges throughout the country since 1975. Various types of exchanges including electromechanical, ESK and stored programme or computerized exchanges have been installed over the years. In total some 400,000 subscribers have benefited from these projects. More recently, systems incorporating technologies involving DDN, AN and FMK systems have also been implemented.
-
WIKA Alexander Wiegand SE & Co. KG
Load pins represent one of the most important components for measuring forces. Existing retention bolts can easily be replaced by these products in existing applications. The application areas range from construction machinery and cranes to stage construction. These force transducers are often used by designers, because, due to their design, they can be directly integrated into the force flow, without taking up space. Since the design requirements for the use of load pins are very individual, the exact layout is important. With WIKA, you will have specialists by your side who already have lots of experience in force measurement.
-
Bourns
Chip Diodes from Bourns has emerged that offers the capability to provide a silicon diode with minimal packaging overhead. The small signal 0603, 1005 and 1206 Chip Diodes are lead free with Cu/Ni/Au plated terminations while the other packages (SMA, SMB, SMC, 1408, 1607, 2010, 2419, 8L NSOIC, 16L NSOIC, SOT23, SOT23-6, 16L WSOIC) use 100% Tin terminations. All Bourns® diodes are compatible with lead free manufacturing processes, conforming to many industry and government regulations on lead free components.
-
Co-Sense Series -
Shimadzu Corp.
The Co-Sense series features automatic sample processing systems intended to improve the efficiency of LC-MS operations by automating complicated sample processing steps. This eliminates the need for tedious, time-consuming, and expensive manual processes. It also achieves parameter settings for separating target components by HPLC can be set freely without being encumbered by LC-MS limitations. The Co-Sense series is especially well suited to the structural analysis of impurities in pharmaceuticals. It is also advantageous for LCMS measurement in the life sciences or chemical industry fields, such as to research metabolites in biological organisms or to analyze the side reaction in chemical synthesis.
-
Hamilton Sunstrand GSE
Primary power distribution systems (PPDS) and secondary power distribution systems (SPDS) enable seamless control and protection of all electrically powered devices, such as window wipers, fans, pumps, heaters and lights. Power distribution systems incorporate the use of solid state power controllers (SSPCs), which increase the reliability of the aircraft by eliminating lower reliability components. Unlike a centralized electric power distribution systems, distribution units that contain SSPCs can be distributed throughout the aircraft and remotely controlled, allowing them to be strategically located to minimize total aircraft wiring.
-
TEST-9110-VXI -
Holding Informtest
The TEST-9110-VXI "Flight" system is a Russian modular system for automated quality control of harnesses and wiring. The system is built on the basis of the international VXI standard, and all its components are manufactured entirely in the Russian Federation by the Informtest holding. The advantages and simplicity of TEST-9110-VXI have already been appreciated by more than 50 leading Russian enterprises in various fields of production. Starting from 2007 and up to the present moment, “Polyot” is the most popular system of this class in Russia, which completely replaces similar import systems in its parameters.
-
Chroma 16502 -
Chroma Systems Solutions, Inc.
With a basic accuracy of 0.05%, Chroma 16502 offers a 0.001mΩ ~1.9999MΩ wide measurement range. It provides measurement range with 4 1/2 digits resolution. The fast measurement time is 65 ms. It suits component evaluation on production line. Pulsed test current output mode is used to reduce thermal EMFs affection on milliohm measurement. DC test current output mode is used to fasten measurement speed for inductive DUT. Dry-circuit test current output mode is used to measure such contact resistances where the maximum open-circuit voltage must be limited to 20mV.
-
CS-139E -
HORIBA, Ltd.
The CS-139E is for TMAH/H2O2 solutions in the cleaning process in semiconductor manufacturing, and monitors the concentration of chemical solutions with high precision. Achieve unprecedented high-speed responsiveness and compactness. The concentration of each component of the TMAH/H2O2 solution (TMAH/H2O2/H2O), which is used as an alternative SC-1 for the removal of particles and organic matter, is constantly monitored. By feedback control employing monitor output, it is possible to keep the concentration of TMAH/H2O2 solution within the allowable range while eliminating unnecessary chemical solution exchange. In addition, a lineup of integrated coolers is also available, covering a wide range of sample temperatures.
-
TTTech Computertechnik AG
TTESync is a synchronization component that allows tight synchronization of VxWorks 653 partitions to the fault-tolerant system-wide cycle time of the TTEthernet communication network. All partitions executed on different modules can be “pinned down” within the overall system cycle time, thus enabling the lowest latency and minimum jitter in message exchange among distributed functions. At system level this results in clean layering, well-understood functional interactions and simpler application design, testing and system integration. System architects can reduce system complexity and further optimize system size, weight, power (SWaP) and life-cycle costs.
-
Atico Export
A Universal Testing machine, also known as universal tester, materials testing machine, is used to test the tensile strength and compressive strength of materials. It is named after the fact that it can perform many standard tensile and compression tests on materials, components and structures. Along with these, there are many more capabilities of this testing machine. There are variety of terms in the industry that are used to refer to a UTM. Most common are “tensile tester”, “compression tester” and “bend tester”. An earlier name for a tensile testing machine is a Tensometer. It is used to play out the numerous tractable pressure and compressive quality of materials or parts.
-
KOERZIMAT® 1.097 MS -
Foerster Instruments, Incorporated
The KOERZIMAT 1.097 measuring system by FOERSTER facilitates the accurate, automatic, and fast measurement of the weight-specific saturation polarization σs and volume-specific saturation polarization Js. The largely geometry-free measurement is particularly suitable for testing samples with complex shapes. The KOERZIMAT 1.097 MS is used for applications such as controlling the sintering level during hard metal sintering processes and determining the tungsten content dissolved in cobalt as well as the free iron, cobalt, and nickel content in powder / hard metals. The saturation polarization Js in Tesla can also be determined in soft magnetic components of magnetic circuits.
-
PractiTest Ltd.
Filters enable you to organize your data in a dynamic rather than a static way. Using filters, you can organize your issues, tests, testSets, and requirements, based on their fields, and have the information, displayed in multiple ways. For example, you can create 2 filters in the Test library module - one that displays the tests that are related to the DB server and the other filter displaying tests whose priority is ‘Show Stopper’. A test that has its component field set on ‘DB server’ and its Priority set on ‘Show stopper’ will appear in both trees accordingly.
