Showing results: 1906 - 1920 of 2664 items found.
-
Lt-C/M3840B -
Teledyne Lumenera
With a smaller design, the Teledyne Lumenera Lt Series Board Level Cameras can be added to many applications where weight is the deciding factor. If a device needs to be light and/or mobile, such as in a vehicle, adding weight can really limit performance. The Lt-C/M3840B offers high resolution images with increased sensitivity to ensure the clarity of images, even in low light environments.
-
Lt-C/M4020 -
Teledyne Lumenera
The top priority for a vision system designed to be transported is size and weight. The Teledyne Lumenera Lt-C/M4020 camera offers an easy-to-handle form factor that can be integrated into a variety of designs such as handheld vision systems. The Lt-C/M4020 camera is also an obvious choice for applications in machine vision such as flat panel inspection, metrology, and robotics where a camera needs to fit into a predetermined space. The smaller footprint and lower weight means vision system designers do not have to be concerned with heavy and bulky hardware when looking to maximize imaging performance.
-
Lt-C/M4060 -
Teledyne Lumenera
The Lt-C/M4060 camera combines advanced Teledyne Lumenera technology with the Sony Pregius® IMX255 CMOS global shutter sensor. Its small form factor and lightweight design means the Lt-C/M4060 is ideally suited to applications in machine vision, life science, and UAVs. With FPGA power and integrated frame buffering, the Lt-C/M4060 provides fast, dependable image delivery.
-
Lt-C/M2050 -
Teledyne Lumenera
Using the Sony Pregius® global shutter CMOS IMX252 sensor, the Lt-C/M2050 provides the fastest full resolution images possible from this sensor. Combining a 3.45 µm pixel size, CMOS global shutter architecture, and very low noise, the Lt-C/M2050 is cost effective, off-the-shelf solution for machine vision, life sciences, and high motion applications.
-
Lt-C/M2020 -
Teledyne Lumenera
The Teledyne Lumenera Lt-C/M2020 camera, like the others in the compact Lt Series, allows for cable connection on the side of the camera instead of at the back. Using the side of the camera for cabling allows for a much thinner vision system because the camera can lie flush against other components. With a 3.2 megapixel resolution and a fast 55 fps frame rate, the Lt-C/M2020 camera captures images in a wide variety of application environments. This form factor is ideal for aerial imaging systems such as, unmanned aerial vehicles (UAVs) by reducing the weight and size of the vision system.
-
Lt-C/M4430 -
Teledyne Lumenera
Choose the Lt-C/M4430 USB3 camera for high-resolution and high frame rates. With 4432 x 4436 pixels and a maximum speed of 28 fps, this Sony® Pregius™- based camera captures every detail in a wide variety of vision system applications from aerial imaging and Intelligent Traffic Systems, to robotic inspection solutions, and life sciences. Capture fine detail more quickly with the high-resolution Lt-C/M4430 and get the simple integration of a USB3 interface that is up to 15% faster than competitive USB3 Vision cameras.
-
Lt-C/M4030B -
Teledyne Lumenera
With the caseless design of the Teledyne Lumenera Lt Series Board Level Cameras, the Lt-C/M4030B offers a compact option for OEM solutions. With ease of design in mind, the flat back and side mounted connectors for these cameras can provide a smaller foot-print and shorter cable lengths. This caseless design also reduces the mass of the Lt-C/M4030B camera to 28g which makes it ideal for aerial imaging applications such as, precision agriculture with UAVs. By reducing the overall weight of the vision system, a battery powered vision system can increase its flight time and collect more data.
-
Lt-C/M2420 -
Teledyne Lumenera
The Teledyne Lumenera Lt-C/M2420 camera offers the full set of features that have come to be expected in the imagining industry. Instead of compromising on a camera because of its size, the new Lt-C/M2420 comes in a compact design that is ideally suited to a wide variety of vision systems. Without the added space taken up by traditional machine vision cameras that use rear connecting cables, these cameras open up new opportunities for engineers to incorporate a full functioning camera without unnecessary compromises.
-
Lt-C/M4040 -
Teledyne Lumenera
The Lt-C/M4040 uses the Sony Pregius® IMX253 sensor which is the largest of Sony’s global shutter CMOS sensors. With FPGA performance, onboard frame buffering, and Teledyne Lumenera’s advanced image processing technology, the Lt-C/M4040 delivers high resolution images from a camera with a small form factor. This makes the Lt-C/M4040 ideally suited for machine vision, life sciences, UAV, and ATI applications.
-
Lt-C/M1950 -
Teledyne Lumenera
The Teledyne Lumenera Lt-C/M1950 camera reaches a frame rate of up to 162 fps. This is important in applications such as factory automation where camera frame rate has a direct relationship to the speed of a conveyor belt, for example. By using a faster camera, the high frame rate allows an assembly line to increase the speed at which products are being inspected. An example of this is with flat panel inspection where the speed of inspection can increase by taking a greater number of images with the high frame rate of the Lt-C/M1950, effectively increasing the potential production.
-
Lt-C/M3200B -
Teledyne Lumenera
In challenging outdoor imaging applications, having the ability to capture clear images in varying lighting conditions is key. The 7.1 megapixel Sony® Pregius™ IMX428 is capable of large full well capacity and brings increased dynamic range to the Lt-C/M3200B camera. This, in combination with larger pixel sizes, also allows for high levels of detail in low light environments.
-
Lt-C/M2420B -
Teledyne Lumenera
For many industrial cameras, the volume of the space they occupy in any vision system can result in some design compromises. With the Teledyne Lumenera board level cameras, even products that need to be regularly transported or easily handled, can still benefit from the imaging performance of a high-performance camera while maintaining a compact design with a smaller footprint or reduced weight. With the Lt-C/M2420B, vision systems can be equipped to image virtually any application that can benefit from the smallest design from Teledyne Lumenera so far.
-
Lt-C/M5470 -
Teledyne Lumenera
With many imaging applications the overall megapixel value of a camera’s sensor is not the most important specification. With a 5472 x 3084 resolution, the Lt-C/M5470 camera is ideal for applications that benefit from a large pixel width. For example, a large pixel width allows unmanned aerial vehicles to capture a wider landscape with each image or an intelligent traffic system to image a greater number of lanes on a roadway. And, with a high dynamic range to go along with its wide field of view, the images from the Lt-C/M5470 clearly distinguish areas of interest.
-
Lt-C/M6480 -
Teledyne Lumenera
For challenging imaging applications where the maximum number of pixels are needed, the Lt-C/M6480 offers a large 31-megapixel APS-C sensor in a compact, rugged, and reliable camera. Designed for use in hot or cold environments and supporting operating temperatures of 0 to 50 degrees Celsius, the Lt-C/M6480 is suited for industrial applications with its secure USB3 interface with a locking connector. In outdoor applications such as traffic monitoring, this camera offers reliable color and detail in various weather conditions.
-
Lt-C/M3200 -
Teledyne Lumenera
The Sony® Pregius™ Gen 3 IMX428 sensor used within the Lt-C/M3200 camera enables a higher degree of fidelity within challenging imaging applications. For example, DNA sequencing and digital pathology can benefit from high dynamic range, sensitivity, and frame rate. The slim profile of the Lt Series Cameras is ideal for applications that require a tight fit in their OEM designs without compromising on image quality.
