Filter Results By:

Products

Applications

Manufacturers

Automatic Test Equipment

equipment that automatically analyzes functional or static parameters to evaluate performance. AKA: ATE

See Also: ATE


Showing recent results 76 - 90 of 207 products found.

  • Automatic Winding Test Machine

    AWX-05S - ECG KOKUSAI Co., Ltd.

    This equipment is a system which does several electric characteristic tests, such as Armature and Stator coils. It is a system which performs an automatic test and judge according to the set-up parameters, and anyone can perform quality test judgment easily by desorbing a work. Moreover, an impulse test is efficient and does the electric examination of the winding state by not destroying the item.It is inductance and Q which the damped oscillatory wave form generated in a transient phenomenon waveform, i.e., coil, and when there are number of turns difference in a coil, a core, the difference in the material, etc. can judge it simultaneously.That is, almost all characters required as a quality of winding can be inspected very much in a short time.

  • Insulation Resistance Measurement

    MD 5075x - Scope T&M Pvt, Ltd.

    The digital insulation tester model MD-5075x is Megabras'' cutting edge insulation analyzer equipment and it is one of the most complete and sophisticated available in the international market. A powerful software allows for further analysis of tests results, including features such as graphical representation and automatic report generation. Its proven technology provides safe, reliable and accurate measurements of insulation resistances up to 5 TW, with 4 pre-selected test voltages, 500 V - 1 kV - 2.5 kV - 5 kV. Other test voltages may be selected in steps of 25 V, 100 V or 500 V.

  • PXI Hybrid Dual Transfer Switch, DC to 26.5 GHz

    M9156C - Keysight Technologies

    M9156C operates from DC to 26.5 GHz, providing a low-cost operation switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromise in the RF performance. It is being used in applications such as ATE, RF communications measurement and RF parametric measurements where a rugged switching module is needed for signal routing. Keysight M9156C transfer switches can be used in many different applications to increase system flexibility and simplify system design. For example, switch between two inputs and two outputs, or bypass an active device.

  • VXI Video Processor System

    Model 65VP1 - North Atlantic Industries

    NAI’s 65VP1 is a Video Processor System (VPS) on a VXI board. Capable of highly accurate video stimulus and measurements, this state-of-the-art instrument is the culmination of over three generations of Automatic Test Equipment (ATE) development programs. It provides increased functional density, and it reduces power consumption, size, and cost of the overall system. The 65VP1 is ideally suited for defense and commercial ATE programs, including television applications.

  • Impact Specimen Preparation Equipment

    Jinan Testing Equipment IE Corporation

    DWCT Low Temperature Chamber for Impact Specimen in Drop Weight Testing is specially designed according to ASTM E 208& equivalent ISO Test Method for DWTT of Ferrite Steel Materials. The Low Temperature Chamber adopts multiple compressors, cooling technology and utilizes the heat balance principle and cycle stirring method to realize the constant cooling to impact specimen. With digital display and automatic control temperature, the Low Temperature Chamber is an ideal equipment for cooling and keeping constant temperature.

  • Clock Generation Devices

    Analog Devices Inc.

    Analog Devices offers ultralow jitter clock generation products for wireless infrastructure, instrumentation, broadband, automatic test equipment, and other applications demanding subpicosecond performance. Our clock products are ideal for generating the high speed, low noise clock signals required to clock high performance analog-to-digital converters (ADCs) and digital-to-analog converters (DACs). ADI clock ICs integrate PLL cores, dividers, phase offset, skew adjust, and clock drivers in small chip scale packages.

  • PXI Hybrid Dual SPDT Coaxial Switch, DC to 26.5 GHz, Unterminated

    M9155C - Keysight Technologies

    The M9155C operates from DC to 26.5 GHz, providing a low-cost switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromising RF performance. It is used in applications such as ATE, RF communication and RF parametric measurements where a rugged switching module is needed for signal routing. Typical switching applications for SPDT coaxial switches include signal routing of a single input to dual instruments.

  • PXI Hybrid Single SP6T Switch, DC to 26.5 GHz, Terminated

    M9157C - Keysight Technologies

    M9157C operates from DC to 26.5 GHz, providing a low-cost operation switching solution for measurement and automation of Automatic Test Equipment (ATE) systems without compromise in the RF performance. It is being used in applications such as ATE, RF communication and RF parametric measurements where a rugged switching module is needed for signal routing. Typical switching applications for multiport coaxial switches include signal routing to a single input to multiple instruments and routing of multiple input signals.

  • VXI Video Processor System

    North Atlantic Industries

    NAI’s 65VP1 is a Video Processor System (VPS) on a VXI board. Capable of highly accurate video stimulus and measurements, this state-of-the-art instrument is the culmination of over three generations of Automatic Test Equipment (ATE) development programs. It provides increased functional density, and it reduces power consumption, size, and cost of the overall system. The 65VP1 is ideally suited for defense and commercial ATE programs, including television applications.

  • LXI High-Density Matrix

    Pickering Interfaces Ltd.

    Our LXI High-Density Modules are single and double pole matrices available in a wide range of configurations including versions with the added flexibility of dual analog bus. These high-density matrices are ideal for signal routing in large automatic test equipment (ATE) systems and are suitable for applications where a simple start-up process is required and for applications requiring control over large distances.

  • Synchro/Resolver Simulators

    North Atlantic Industries

    NAI offers a wide variety of Synchro/Resolver Standards and Simulators that can be used as standards for calibrating and testing Automatic Test Equipment (ATE) or for measuring the static or dynamic characteristics of Angle Position Indicators (APIs) and Synchro-to-Digital Converters. Features include up to 2 arc-second accuracy, programmable parameters, and 3.0 VA output. Ideally suited for defense, commercial aerospace, and industrial applications, these measurement instruments deliver industry-leading performance in a variety of accuracy and resolution grades, with various packaging options.

  • Fiber Optic Power Meter

    Huihong Fiber Inc

    Fiber optic power meter is a test instrument used for absolute optical fiber power measurement as well as fiber optic loss related measurement .This hand held type fiber optic test equipment features ingenious appearance,wide range of power measurement, high accurate test precision and user automatic self calibration function. Fiber optic power meter is a tool for telecom and CATV network.

  • Automatic High Voltage Wire Harness Testers

    MK Test Systems Ltd.

    Automatic high voltage wire harness testers are used in a variety of industries, such as aerospace and defence through to rail, and are used to test any equipment which contains a high number of electrical wires, or active components ensuring these pass specified test criteria at the sub-assembly and final stages of construction. These systems ensure the wiring and components are 100% compliant and undamaged, recording every test measurement and aiding diagnosis of detected faults.

  • Digital Programmable Attenuators

    AD-USB4APT5 - Adaura Technologies

    The Adaura Technologies AD-USB4APT5 series of digital programmable attenuators offers the best in class of performance, size, cost, and ease of programmability. The AD-USB4APT5 provides 0.05-6.00GHz 50 ohms operations in 0.5dB steps. Four independent channels can be controlled and powered via one single USB port thus greatly reducing test set up complexity. An easy to use GUI provides fixed attenuations as well as flexible ramp functions. Custom automation is easily accomplished via simple serial port commands on any Windows or Linux based PC. It can be adapted to any existing automatic test equipment with minimal effort.

  • VLF Testing and Diagnostics Unit

    Frida TD - BAUR Prüf- und Messtechnik GmbH

    Cable testing and diagnostics with the BAUR frida TD. The portable and high performance high-voltage testing and diagnostics device is available in two different configurations: frida: Used for cable and cable sheath testing of medium-voltage cables and electrical equipment up to 20 kV. Another function is insulation testing on electrical equipment.frida TD: Expands the functional scope of frida with the tan delta diagnostics and Monitored Withstand Test (MWT) that combines the cable testing and dissipation factor measurement. This allows for an accurate and comprehensive assessment of the cable condition.* Cable testing and dissipation factor diagnostics in one device* Easy and quick test setup* Automatic testing and diagnostic sequences* Compact dimensions and lightweight