Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing recent results 3166 - 3180 of 3237 products found.

  • Power Analysers

    Mors Smitt Group

    The quality of all kinds of products is vital and the energy network as well. This does not mean that the electricity network is actually clean. Different processes are detected, such as Flicker, surges and voltage dips. It is necessary to include these processes to a minimum. The power analysers will help the user to draw conclusions on the basis of periodic measurements, so that these problems can be solved.  The European regulation EN 50160 is one of the most important regulations for measurements of LV-installations. The essential values for LV-installations are subscribed in this regulation. Besides the EN50160  there is another important standard, the EN 61000-4-30. This standard ensures that different PQ instruments use the same definitions, and measurement techniques, for various power quality parameters: sags/dips, swells, frequency, harmonics, Flicker etc.. Use of this standard ensures that users use the same terms, measurements and definitions. In order to measure and analyse a LV-installation, according to the EN 50160, two power analysers are available within the Nieaf-Smitt program:

  • Power and energy calibrators

    MEATEST, s.r.o.

    Three or single phase electric power/energy calibrator with power quality functions for calibration and testing of grid measuring appliance like power meters, power transducers or power quality analysers.

  • Power, Energy and Disturbance Analysers

    Chauvin Arnoux Metrix

    Designed for test and maintenance departments working in industrial or administrative buildings, it can be used to obtain a snapshot of the main features characterizing the quality of the electrical network.

  • Power Quality Analyser

    PM7000 - Outram Research Ltd (ORL)

    It offers virtually everything needed to monitor and record power for surveys and audits. It includes 4 voltage input channels capable for measuring 0 to 600 Vac and 4 current input channels for use with voltage output current clamps, or Rogowski Coil sensors supplied. Twelve pre-stored connection configurations are set for 3 phase, 2 phase and single phase measurements. Users can also configure their own set-up and math calculation requirements and save them to non-volatile memory.

  • Power Quality Analyser

    PM1000 - Outram Research Ltd (ORL)

    The PowerMaster 1000 Single Phase Logger is a 3-channel data logging system built into an easy to carry housing. It is ideal for responding to residential voltage complaints and power consumption problems. It is particularly useful for troubleshooting.

  • Power Quality Analyser

    iSTAT M355 - GE Grid Solutions

    The iSTAT M355 is a Power Quality Analyser that provides measurements to IEC 61000-4-30. 2008 Class A and reports Power Quality compliance to EN50160: 2011. Sampling at a rate of 31 kHz (620 samples per cycle at 50Hz) and true RMS measurement gives accurate readings under all harmonic conditions, with Measurement accuracy better than 0.1% and Class 0.2S Energy.

  • Power Quality Analyser

    PM3000HF - Outram Research Ltd (ORL)

    It measures almost every aspect of the electricity you’re supplying or receiving, so is a must for utility, electricity and power supply companies as well as large industrial consumers, from heavy machinery plants to hospitals and supermarkets.

  • Power Quality Analysers

    EPPE - KoCoS Messtechnik AG

    Power quality measuring systems with integrated fault recorder functionality for continuously and automatically monitoring electrical installations at all voltage levels. The measuring systems of the EPPE series continuously and precisely record all the electrical parameters of the power supply. They deliver detailed quality evaluations which reveal even the smallest of deviations and contribute to identifying the cause of disturbances.

  • Pre-Selectors for EMC test

    Laplace Instruments Ltd.

    These Pre-Selectors are high specification, switched band filters which track the scanning of the EMC Analyser. Control is via USB link from the Laplace EMCEngineer software supplied with SA1002 and SA3000 analysers. Installation and operation is completely automatic, and the filters will synchronise with the analyser scan without any operator intervention. A front panel switch allows manual operation if required.

  • Product Range

    Solus - Protea Ltd

    Introducing Protea's new range of laser gas analysers - Solus. The Solus platform represents an extension of Protea's spectroscopic gas analysis equipment into laser based technology, allowing for highly selective, quick response and low range measurements of 1 or 2 gases in a cost-effective, re-configurable package. Solus utilises the latest in Tunable Laser Diode Absorption Spectroscopy (TDLAS), together with the best in micromachining technology, to deliver a precisely controlled narrow wavelength that can be tuned over a small range. The narrow linewidth allows for selection of precise spectral absorbance in the NIR region, free from cross-interferences of other absorbing gases. For some tuning ranges, a number of gases can be measured by tuning a single laser diode e.g. NH3 and H2O.

  • Pronto For Windows

    Outram Research Ltd (ORL)

    Pronto for Windows is Outram’s full-featured Windows-based power quality software designed to extract data from the Outram Power Master family of data loggers and power quality analysers and present it graphically for analysis.

  • Protocol Analyser, Simulator & Conformance Test System

    Clarinet - Packet Data Systems Ltd.

    The PDS Clarinet test system is a well respected and established solution for a wide range of protocol analysis, simulation and development applications. This system has been updated and re-launched under a new product name 'Zumara'.

  • PXI 4 x Changeover Switch 1GHz, 50 BNC

    40-710-504 - Pickering Interfaces Ltd.

    Model 40-710 RF switching card has a bank of 4 individual high performance RF changeover switches (50 or 75 Ohm, Bi-directional) with very low insertion loss, suitable for handling signals up to 2.5GHz. Applications include aerial switching, routing high frequency signals into oscilloscopes and analysers. Available with a choice of connectors: SMA, SMB and Siemens 1.0/2.3 versions. BNC versions are also available with reduced bandwidth and 2 PXI slot occupancy. The 75 Ohm versions are suitable for high frequency video and telecommunication signals up to 1GHz.

  • PXI 4 x Changeover Switch 1GHz, 75 BNC

    40-710-704 - Pickering Interfaces Ltd.

    Model 40-710 RF switching card has a bank of 4 individual high performance RF changeover switches (50 or 75 Ohm, Bi-directional) with very low insertion loss, suitable for handling signals up to 2.5GHz. Applications include aerial switching, routing high frequency signals into oscilloscopes and analysers. Available with a choice of connectors: SMA, SMB and Siemens 1.0/2.3 versions. BNC versions are also available with reduced bandwidth and 2 PXI slot occupancy. The 75 Ohm versions are suitable for high frequency video and telecommunication signals up to 1GHz.

  • PXI 4 x Changeover Switch 1GHz, 75 SMB

    40-710-754 - Pickering Interfaces Ltd.

    Model 40-710 RF switching card has a bank of 4 individual high performance RF changeover switches (50 or 75 Ohm, Bi-directional) with very low insertion loss, suitable for handling signals up to 2.5GHz. Applications include aerial switching, routing high frequency signals into oscilloscopes and analysers. Available with a choice of connectors: SMA, SMB and Siemens 1.0/2.3 versions. BNC versions are also available with reduced bandwidth and 2 PXI slot occupancy. The 75 Ohm versions are suitable for high frequency video and telecommunication signals up to 1GHz.