Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing recent results 2971 - 2985 of 3287 products found.

  • Dual Core Noise Test System

    DCNTS - Noise eXtended Technologies S.A.S.

    The DCNTS is a two channel Phase and Amplitude noise analyzer. Its dual demodulator architecture allows the system to use cross-correlation to cancel its internal noise and limitation; it is like comparing the outputs of 2 systems and only display the similarities while rejecting differences.It is capable of measuring absolute phase or amplitude noise but also residual phase noise under CW or pulsed conditions. The input frequency goes from a few MHz to 140 GHz. Residual noise testing is for devices like frequency multipliers or dividers, amplifiers or any other phase coherent input to output device.Pulse compatible, the system is perfect for very demanding Defense and Aerospace applications. Its state of the art dynamic range makes it the lowest noise floor instrument of the market.

  • Herbal Sensor

    CANNA Dx™ - CDx, Inc.

    Our first sensor, Canna, will enable you to identify the most important chemicals in cannabis and then relate them to how you feel when using that specific chemical combination. By using MyDx™ to detect THC, CBD, and other cannabinoid and Terpene ratios coupled with an extensive database of countless chemical combinations and their associated feelings, you will finally have the ability to find the best chemical profile that works for you all in one convenient, portable THC tester. By doing so, you also join a growing community of users that test and add new chemical combinations and related feelings each week. This is the perfect cannabis analyzer that allows you to do your own THC testing without the need to go to an expensive central laboratory.

  • High Performance Zero Air System

    Model T701H - Teledyne Advanced Pollution Instrumentation

    The T701H adds Modbus TCP/IP connectivity to the proven reliability and performance of our high purity zero air system. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature and output pressure. Additionally, this digital access provides the ability to remotely disable the internal pump, allowing longer service intervals and less power consumption. The user can also remotely start instrument warm-up prior to arrival at the site.The T701H is a fully self-contained source of high purity zero air for dilution calibrators. It is ideal for use with highly sensitive analyzers in ambient background and trace level applications. The T701H includes a dewpoint sensor, an oil and diaphragm-free pump, scrubbers to remove SO2, NO, NO2, O3, H2S and NH3, plus high performance scrubbers to remove CO and Hydrocarbons.

  • PSLab

    PSLab

    PSLab is a small USB powered hardware extension for your Android phone or PC that lets you measure all kinds of things. PSLab comes with a built-in Oscilloscope, Multimeter, Wave Generator, Logic Analyzer, Power Source, and we are constantly adding more digital instruments. PSLab is many devices in one. Simply connect two wires to the relevant pins and start measuring. You can use our Open Source Android or desktop apps to view and collect the data. You can also plug in hundreds of compatible I2C standard sensors to the PSLab pin slots. It works without the need for programming. So, what experiments you do is just limited to your imagination! PSLab is developed by FOSSASIA and OpnTec in collaboration with a global community of Open Source developers.

  • Real-Time RF Drone & Radar Detection System

    Aaronia AG

    Find here our latest product: The RF Drone or Radar Detection System. It is based on the Aaronia IsoLOG 3D Tracking Array Antenna, a rugged or remote-controllable Spectran V5 Real-time Spectrum Analyzer and a new Software Plugin for the RTSA Suite Software. All parts work perfectly together and allow a 24/7 monitoring and recording (full gapless data-streaming with up to 4TB/day). Each Sector/Antenna gets its own real-time view and is based on RF and µW detection. All views are combined to a 360° view including a 360° picture or 360° live video of the surrounding area/landscape. This gives full control over any RF emissions happening around. The system can provide an optical or audio alert if critical values are exceeded. Collect data and compare them to find out irregularities.

  • Suspended Sediment Sensor

    LISST-StreamSide - Sequoia Scientific, Inc.

    Laboratory grade laser particle size analyzer compliant with ISO-13320-1 – same laser diffraction technology as in our other LISST lasers5 mm optical path length for high concentrations (read this article to compute how high concentrations the LISST-StreamSide can handle)Records detailed size distribution AND concentration in 32 size classesBuilt-in clean water delivery system for automatic clean water background collection5-inch graphics touch panel display for configuration and size distribution displayBuilt-in compact flash memory (128Mb standard, expandable to 4Gb)Size and volume distribution is computed on board and saved as ASCII file compatible with ExcelNominal 12VDC power (110VAC or 220VAC optional)Sealed NEMA-4X housing with clear cover and lockSpecially designed 12V sealed pump is available and recommended for use with the LISST-StreamSide

  • TRM Test Library

    TS6 - Rohde & Schwarz GmbH & Co. KG

    State-of-the-art AESA radars contain several housand TRMs each, and each TRM must be tested separately during the development and production stage. To handle the large number of different measurements and result values, these tests require a high degree of automation. The R&S®TS6 TRM test library software automates all tests typical for a TRM characterization. It utilizes an R&S®ZNA or R&S®ZVA vector network analyzer and additional equipment . The test software comprises the R&S®TSrun test sequencer and TRM-specific test cases for all common types of TRM tests. Configuration by test parameters for each test case and an open DUT control ensures the flexibility to adopt DUT-specific requirements.

  • USB Controlled RF Signal Generators

    Windfreak Technologies, llc

    Windfreak Technologies provides high value radio frequency devices such as RF Signal Generators, RF Synthesizers, RF Network Analyzers, RF Power Detectors, RF Mixers, and RF Frequency Converters. These devices can be used as RF Test and Measurement Equipment and controlled by Labview in an Automated Test Equipment (ATE) setup, or used as bolt-in RF modules in RF communications equipment. All products have innovative, powerful feature sets controlled by internal microprocessors so any settings can be memorized and used with or without a PC. Windfreak hardware also comes with the Labview GUI source code saving the end user hundreds of hours programming custom software.  Use one of our RF Signal Generators or other products risk free.  Return it if you dont like it.

  • Zero Air System

    Model T701 - Teledyne Advanced Pollution Instrumentation

    The T701 adds Modbus TCP/IP connectivity to the proven reliability and performance of our zero air systems. This allows remote monitoring of key instrument functions including dewpoint status, scrubber temperature, box temperature, and output pressure. Additionally, this digital access provides the ability to remotely disable the internal pump, allowing longer service intervals and less power consumption. The user can also remotely start instrument warm-up prior to arrival at the site.The T701 is a fully self-contained source of clean, dry air for dilution calibrators. It can also be used to create purge air for permeation tube ovens or burner air for FID analyzers. The T701 includes a dewpoint sensor, an oil and diaphragm-free pump, and scrubbers to remove SO2, NO, NO2, O3, H2S, and NH3. Optional high performance scrubbers are available to remove CO and Hydrocarbons.

  • Reconfigurable 6 GHz Vector Signal Transceiver

    PXIe-5644 / 782376-01 - NI

    6 GHz, 80 MHz Bandwidth, RF PXI Vector Signal Transceiver—The PXIe‑5644 combines a vector signal generator and vector signal analyzer with FPGA-based real-time signal processing and control into a single device, also known as a VST. Because of this software-designed approach, the PXIe‑5644 features the flexibility of a software defined radio architecture with RF instrument class performance.

  • Near-Field Probes 100 kHz up to 50 MHz

    LF1 set - Langer EMV-Technik GmbH

    The LF1 near-field probe set consists of 4 shielded near-field probes used during the development process for emission measurement of longwave, medium wave, and shortwave frequencies on electronic devices. The probe heads of the LF1 set are designed for incremental detection of sources of electromagnetic interference on assemblies. First, the electromagnetic interference of the assembly is detected by the LF-R 400 probe from up to 10 cm. Then probes with higher resolution like the LF-B 3, LF-U 5 and LF-U 2.5 are used to more precisely detect any source of interference. The probe heads are designed for taking measurements at single pins and larger components. Near-field probes are small and handy. They have a current attenuating sheath and, therefore, are electrically shielded. They can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. The H-field probes do not have an internal terminating resistance of 50 Ω.

  • Near Field Probes 30 MHz up to 3 GHz

    RF2 set - Langer EMV-Technik GmbH

    The RF2 near field probe set consists of 4 passive near field probes for measurements in the development phase of the magnetic field in the range from 30 MHz to 3 GHz on electronic assemblies. The probe heads of the RF2 set allow the step by step localization of interference sources of the RF magnetic field on assemblies. From greater distances the electromagnetic interference can be detected by RF-R 400-1 and RF-R 50-1 probes. The RF-B 3-2 and RF-U 5-2 probes with their higher resolution can more precisely detect the interference sources. Field orientation and field distribution on an electronic assembly can be detected through a trained special use of the near field probe. The near field probes are small and handy. They have a sheath current attenuation and are electrically shielded. They can be connected to a spectrum analyzer or an oscilloscope with a 50 Ω input. They do not have an internal terminating resistance.

  • Process EDXRF Spectrometer

    NEX LS - Applied Rigaku Technologies, Inc

    Featuring advanced third generation EDXRF technology, the Rigaku NEX LS represents the next evolution of scanning multi-element process coatings analyzers for web or coil applications. To deliver superior analytical performance and reliability, the EDXRF measuring head assembly was derived from the established Rigaku NEX Series high-resolution benchtop instrumentation. With this proven technology, the Rigaku NEX LS delivers rapid, non-destructive, multi-element analyses — for coat weight, coating thickness and/or composition — for elements from aluminum (Al) through uranium (U). The measuring head is mounted on a rigid beam and is equipped with a linear traversing mechanism positioned over a roller so that the head-to-surface distance is constant. Common applications include silicone release coaters, converters, denesting Si for vacuum-formed plastics, RoHS compliance, conversion coatings, metalized plastic, top coatings on metal coil and fire retardants on fabric.

  • Universal Stamper Checker

    DaTARIUS Technologies Inc.

    The Universal Stamper Checker is a response to demands from the optical media industry. There is a clear need for a system that can measure both stamper thickness and roughness. The DaTARIUS Universal Stamper Checker achieves this and is specifically designed to provide an easy to use device to check stamper quality. Stamper checking becomes a 'One Stop' procedure that ensures a very high level of quality control without operator influence. Designed in co-operation between DaTARIUS and technotrans, the Universal Stamper Checker provides an innovative solution based on both the proven DaTARIUS measurement technology and the stamper production experience of technotrans. The Universal Stamper Checker is available in two versions consisting of; a Standalone system or as an add-on to any DaTARIUS DaTAVIEW based system to complement the full range of DaTARIUS Analyzers. Internal automatic calibration ensures that the Stamper Checker provides consistent results each time.

  • RF Synthesizers Modules

    Holzworth Instrumentation, Inc.

    Holzworth's RF Synthesizers Modules were originally designed as the internal, tunable LO test sources for Holzworth phase noise analyzer products. Due to the need for easy integration, the HSM Series designs incorporate a long list of electrical and mechanical features to satisfy the demanding requirements of today's high performance communications systems and integrated test systems. FIELD PROVEN RELIABLITY with MTBFs exceeding 240kHrs.