Filter Results By:

Products

Applications

Manufacturers

Aerospace

Test of aloft craft and equipment .

See Also: Fuel


Showing recent results 331 - 345 of 399 products found.

  • Networking Cards

    Curtiss-Wright Defense Solutions

    Curtiss-Wright switches and routers enable the vision of networked military and aerospace systems by providing systems integrators with a fast and powerful way to interconnect chassis, cards, and CPU's through switched Gigabit, 10 Gigabit and 40 Gigabit Ethernet as well as sRIO and Infiniband links. Operating at wire-speed, Ethernet switching and routing can be used to architect the infrastructure for unified (Ethernet only) or hybrid (Ethernet control and other switched data-plane fabric) networks for transferring IP-based control and data packets within advanced military systems.

  • PXI Function Generator

    Pickering Interfaces Ltd.

    Our PXI Function Generator is capable of generating sine, square and triangle waveforms to 10MHz with 48-bit frequency resolution referenced to the 10MHz PXI clock or to an external standard. It can generate fast swept frequency signals, permitting the output to emulate the operation of variable speed devices. The module can also generate arbitrary waveforms loaded into its internal 256k memory, allowing the emulation of many waveform types including the typical waveforms of automotive and aerospace sensors.

  • CAN Interface Software

    CANalytics - Wineman Technology, Inc.

    CANalytics CAN interface software provides an interface to maximize the benefits of CAN bus hardware, particularly for automotive and aerospace applications where it provides a durable network that supports communication between multiple electronic control units (ECUs). On CAN networks, devices are equipped with controller chips to allow them to see, filter, and prioritize messages. Traditional CAN analysis tools created to provide an interface and automate devices on the network are extremely extensive and subsequently expensive. Because much functionality often goes unused and the tool is needed during only a portion of development, the cost of an advanced platform is difficult to justify. The new CANalytics platform from Wineman Technology makes all the benefits of CAN accessible in one cohesive application with a CAN interface as a standalone executable.

  • Combined Environment Test Chambers

    AGREE Chamber - Thermotron Industries

    AGREE Chambers by Thermotron are combined environment test chambers designed to provide flexibility in adapting to many different environmental testing requirements. The flexible nature of these climatic chambers is due to the fact that AGREE Chambers incorporate humidity, temperature and vibration testing all in one device. AGREE Chambers are available in either temperature only or temperature and humidity configurations with rapid thermal change rates of 5C up to 30C. Repetitive shock and electrodynamic shakers can be fully integrated with AGREE chambers, and shakers can be purchased with the AGREE Chamber or added later as testing requirements evolve. AGREE Chambers were originally designed for the defense and aerospace industry to perform temperature, humidity, and vibration tests conforming to MIL-STD 781 and 883, as prescribed by the Department of Defense's Advisory Group of Reliability of Electronic Equipment (AGREE). AGREE Chambers have been adapted to perform reliability, qualification, and Environmental Stress Screening (ESS) for a wide range of industries including electronics, automotive, and telecommunications industries.

  • Electrodynamic 3-axis Vibration Tester

    Kokusai Co., Ltd.

    Our unique technology, "special slide mechanism" and "floating mechanism" enable 3-axis simultaneous vibration test in high frequency band up to 2000 Hz, which was difficult to realize so far. A frequency range up to 2000 Hz is essential for vibration testing Of Aerospace Electronic And Electrical Devices. Conventional Single-Axis Vibration Testing Has Been The Mainstream In Conventional High-Frequency Vibration Testing Machines, But High-Frequency Three-Axis Vibration Testing Is Essential To Ensure High Reliability Of Electronic Components Such As EVs, HEVs, motors, inverters, ECUs and PCUs. By performing a 3-axis simultaneous vibration test, it has become possible to reproduce complex vibration generated in a real environment in the test room.You can also select various environmental tanks. It is possible to select a high performance model with low cross talk and high surface distribution performance and a general model .

  • Hydrostatic Testers

    Hydraulic Technology, Inc.

    Hydraulic Technology Inc. has been manufacturing hydrostatic test equipment to the U.S. Military, aerospace and industrial sectors for over 28 years. These hydrostatic test systems are used for both high pressure proof testing and burst hydrostatic testing. By simply connecting one of our hydrostatic test systems to a shop air supply, safe high pressure testing can be accomplished with hydrostatic test output pressures available up to 15,000 psi. Among other specifications, our hydrostatic testers meet the requirements of MIL-T-25456, A-A-52687 AND PD02LEEE07. In addition to U.S. Military stock listed hydrostatic testers, we manufacture both standard and custom hose proof test stands, portable hydrostatic testers, hydrostatic test chambers and ancillary equipment to fit individual customers’ needs as required. We can typically ship standard units within 24-72 hours, sooner if required.

  • CompactPCI

    3U PMC Carrier - PCI EmbeddedComputer Systems

    This conduction cooled 3U CompactPCI single slot PMC provides an active interface between the CompactPCI bus (backplane) and a PCI Mezzanine Card (PMC). This product addresses the needs of aerospace, military, and rugged applications. It contains a thermal heat frame made of aluminum that fits together with conduction cooled PMC modules. Conduction cooling conducts heat away from the hot spots of the board and transfers the heat to the card edges and to the system chassis. No active ventilation is necessary inside of the system, which means the boards are sealed from the environmental influences found outside of the chassis. The heat frame and integrated wedge locks for the conduction cooling stiffens carrier and PMC module enabling the board to resist high shock and vibration.

  • CompactPCI

    6U PMC Carrier - PCI EmbeddedComputer Systems

    This conduction cooled 6U CompactPCI dual slot PMC provides an active interface between the CompactPCI bus (backplane) and a PCI Mezzanine Card (PMC). This product addresses the needs of aerospace, military, and rugged applications. It contains a thermal heat frame made of aluminum that fits together with conduction cooled PMC modules. Conduction cooling conducts heat away from the hot spots of the board and transfers the heat to the card edges and to the system chassis. No active ventilation is necessary inside of the system, which means the boards are sealed from the environmental influences found outside of the chassis. The heat frame and integrated wedge locks for the conduction cooling stiffens the carrier and PMC module enabling the board to resist high shock and vibration.

  • Advanced Design System (ADS)

    Keysight Technologies

    Advanced Design Systemis the world's leading electronic design automation software for RF, microwave, and high speed digital applications. In a powerful and easy-to-use interface, ADS pioneers the most innovative and commercially successful technologies, such as X-parameters* and 3D EM simulators, used by leading companies in the wireless communication & networking and aerospace & defense industries. For WiMAX, LTE, multi-gigabit per second data links, radar, & satellite applications, ADS provides full, standards-based design and verification with Wireless Libraries and circuit-system-EM co-simulation in an integrated platform. Watch our ADS 30-Second Demos to see the powerful and easy-to-use ADS interface in action.

  • Switch Module

    SMX-6103 - AMETEK VTI

    The VTI SMX-6xxx Series of high density non-blocking RF multiplexers deliver exceptional performance and reliability in a compact single-slot configuration. Front panel connectivity is available in both SMB and PKZ formats to integrate seamlessly into new or existing test systems. Embedded virtual schematic control further simplifies setup and debugging allowing all relays to be engaged independent of application software and device drivers.The SMX-6xxx Series delivers unmatched bandwidth and isolation performance resulting in exceptional measurement integrity that is ideal for the most demanding aerospace, defense and automotive automated test equipment (ATE) applications.

  • Switch Module

    SMX-6144-SMB - AMETEK VTI

    The VTI SMX-6xxx Series of high density non-blocking RF matrix cards deliver exceptional performance and reliability in a compact single-slot configuration. Front panel connectivity is available in both SMB and PKZ formats to integrate seamlessly into new or existing test systems. Embedded virtual schematic control further simplifies setup and debugging allowing all relays to be engaged independent of application software and device drivers.The SMX-6xxx Series delivers unmatched bandwidth and isolation performance for multi-point connectivity, resulting in exceptional measurement integrity that is ideal for the most demanding aerospace, defense and automotive automated test equipment (ATE) applications.

  • Switch Module

    SMX-6111-SMB - AMETEK VTI

    The VTI SMX-6xxx Series of high density non-blocking RF multiplexers deliver exceptional performance and reliability in a compact single-slot configuration. Front panel connectivity is available in both SMB and PKZ formats to integrate seamlessly into new or existing test systems. Embedded virtual schematic control further simplifies setup and debugging allowing all relays to be engaged independent of application software and device drivers.The SMX-6xxx Series delivers unmatched bandwidth and isolation performance resulting in exceptional measurement integrity that is ideal for the most demanding aerospace, defense and automotive automated test equipment (ATE) applications.

  • Switch Module

    SMX-6116-SMB - AMETEK VTI

    The VTI SMX-6xxx Series of high density non-blocking RF multiplexers deliver exceptional performance and reliability in a compact single-slot configuration. Front panel connectivity is available in both SMB and PKZ formats to integrate seamlessly into new or existing test systems. Embedded virtual schematic control further simplifies setup and debugging allowing all relays to be engaged independent of application software and device drivers.The SMX-6xxx Series delivers unmatched bandwidth and isolation performance resulting in exceptional measurement integrity that is ideal for the most demanding aerospace, defense and automotive automated test equipment (ATE) applications.

  • Switch Modulr

    SMX-6106-SMB - AMETEK VTI

    The VTI SMX-6xxx Series of high density non-blocking RF multiplexers deliver exceptional performance and reliability in a compact single-slot configuration. Front panel connectivity is available in both SMB and PKZ formats to integrate seamlessly into new or existing test systems. Embedded virtual schematic control further simplifies setup and debugging allowing all relays to be engaged independent of application software and device drivers.The SMX-6xxx Series delivers unmatched bandwidth and isolation performance resulting in exceptional measurement integrity that is ideal for the most demanding aerospace, defense and automotive automated test equipment (ATE) applications.

  • 26.5 GHz Multimode 850nm Lightwave Component Analyzer

    N4376D - Keysight Technologies

    The new N4376D Multimode LCA is based on the latest 5222A series Network analyzers with 2-port or 4-port configuration. This LCA is the ideal measurement solution for electro-optical components up 26.5 GHz electro-optical components, as well as Radio over Fiber (RoF) and aerospace and defense (A&D) electro-optical test applications.The N4376D is traceable to international standards and provides guaranteed specifications for electro-optical responsively S-parameter measurements in a turn-key solution. In combination with N4691B electronic calibration kit you get fastest setup of your test, so you can focus on developing your components.