-
product
19" Solid Fixed Storage Shelf, 24"D
SS-1924
Sturdy 19" shelf formed of one piece of 16 ga. CRS bolts to panel mounting rails. Supports heavy chassis or power supplies or provides storage for tools, test leads, chart paper, etc.
-
product
Rack Mount Osprey Chassis 5.25" Qbus
97106-Q
5.25" high by 19" wide by 20" deep (134 x 483 x 508 mm), this chassis is FCC/CE certifiable**. A quad-height Qbus backplane, cooling fans, and slides are provided, diskette and hard drives (two visible 5.25" and two hidden 3.5" bays), and up to four quad-height Qbus compatible cards.
-
product
Rack Mount Audio/Lighting/Network Cable Tester
AudioJog Rack 8
There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin, so that short, open and crossed circuits can be easily found.
-
product
24"D Retractable Writing Shelf for 24" Racks
WS-022424
24" x 24"D retractable writing shelf operates smoothly on ball bearing slides which lock in fully extended position.
-
product
4U x 19” Rackmount Fan Pack with 466 CFM
FP7-466
4U Fan Pack: UL listed fans prepackaged for 19” mounting with 466 CFM. UL listed fans prepackaged for 19” mounting with 108 CFM. Fans are mounted on panels with finger guards installed.
-
product
Gap Cover, G12/G12x, Rack Mount
310113433
Gap cover for use with rack mounting G12/G12x Receivers. The gap cover is not required if a rack extender kit is used.
-
product
30"D Retractable Writing Shelf for 24" Racks
WS-022430
24" x 30"D retractable writing shelf operates smoothly on ball bearing slides which lock in fully extended position.
-
product
19" Retractable Storage Shelf, 20"D
WRSS-1920
16-gauge retractable storage shelf is mounted on quick-disconnect slides.
-
product
1.75 (44.45) 19" Perforated Panel
vc
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
product
19" Drawer with Writing Surface, Unshielded, 5.25"H x 20"D
DR-051920-S
Unshielded drawers with writing surface are constructed of 20 ga. CRS and are furnished with ball bearing chassis slides to provide smooth operation. Available for 19" and 24" rackmount in 20", 24" and 30" depths, with or without a keylock
-
product
VPX, Type 12V, 19" Rackmount Family
12V-VPX
Elma's Type 12V, high performance VPX chassis platform, fully compliant to VITA 46 & 65 standards. Consisting of alodined aluminum enclosures, VPX backplane, power supply, cooling system and AC/DC power components.
-
product
21 Slot VME64x 19" Rackmount Development Platform
12V21OPX98N5VCK0
Elma's System 12V family of enclosures for VITA bus architectures (VME, VME64X, VPX and VXS) provide an industrial rugged, versatile platform. Can be configured by selecting the backplane, PSU, device modules and number of slots.
-
product
Rack - Rotatable Arm for Peripheral Devices
OTP2-Modul-Nr041
The module is for mounting on a rack, such as the midi or maxi rack. The extension of the module can create new possibilities for your test system.
-
product
3.50 (88.90) 19" Solid Panel
P-0319
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
product
Receiver, CASS, 19 Position, Single Tier, Commercial
310115103
Receiver, CASS, 19 Position, Single Tier, Commercial.
-
product
Rack Mount Osprey Chassis Q-Bus
0248-Q
4 Quad, 8 Dual height boards or a combination of quad and dual boards. AT style Motherboard, 3, 5-1/4" Bays, 2, 3-1/2" bays, 1 hidden, 1 exposed. this chassis is FCC/CE certifiable**. A quad-height Qbus backplane, cooling fans, and slides are provided plus space for a standard PC motherboard, diskette and hard drives (three visible and one hidden half-height bays), and up to four quad-height Qbus compatible cards.
-
product
Rack Mount Type Amplifiers
Amplifiers for each of O-, S-, C- and L-bands– Compatible with high-speed transmission (up to 100 Gbps)– Available for all signal types and protocols– Compatible with transmitters from all manufacturers– Compatible with SNMP
-
product
14.00 (355.60) 19" Solid Panel
P-1419
Special grade .125” sheet aluminum (5052-H32 EPS). Each side, edge and corner is carefully de-burred and chamfered to provide a flawless finish, resulting in a superior quality panel. Finish is textured unless otherwise specified.
-
product
Flush Mount Rack Kit For M9018A
Y1215B
Y1215B is a rack-mounting kit that suspends the chassis in a Keysight rack using 4 U of rack space. It includes rack flanges, handles, and attachment hardware.
-
product
Mini Power, Module, ITA, 90 Series, 19 Position
510108115
These mini power modules can withstand temperatures up to 140 °C. The faces of the power modules are screened with a red strip to indicate power.
-
product
Kid's Finger Test Probe 19
CX-19
Shenzhen Chuangxin Instruments Co., Ltd.
Children Finger Test Probe 19 is intended to simulate access to hazardous parts by children of 36 months or less.
-
product
Terminal Test Kit (19 PCS)
3604
Peaceful Thriving Enterprise Co Ltd
1. Checks voltage on 6, 12 and 24V systems.2. 12-feet flexible rubber wire with spring relief.3. Tough plastics handle lights up if circuit is good.4. 4mm connection for banana plugs.5. Facilities the measurement on connectors and components without destroying the insulation or the plug connection.
-
product
Rack Mount RF Signal Generator
The Rack Mount platform of the Lucid signal generator is designed to offer maximum channel density at minimum cost of space. Offering up to 4 phase coherent channels in a 19” 1U box and up to 16 phase coherent channels in a 19” 3U box, the rack mount platform is by far the best in its class for signal density. Featuring fast switching speed, superior signal integrity and purity, removable memory card for maximum security, all the necessary modulated signals for analog communication systems, built in LAN and USB interfaces, this platform meets today’s most demanding specifications, needed for ATE and production lines.
-
product
6 Slot 4U CompactPCI 19" Rackmount Development Platform
39C06AD648Y4HCCX
The Type 39C is an advanced generation of CompactPCI chassis for PICMG 2.0, 2.16, 2.17, and EXP.0 applications. IEEE 1101.10/11, 6U x 160mm CPCI cards from the front and 6U x 80mm I/O cards from the rear.
-
product
VITA, Type 11V, 19" Rackmount Family
11V-VITA
Elma Type 11 family of enclosures, VITA System applications. Designed to IEEE 1101.10/.11, EMC shielding. 3U-9U cards mounted vertically or horizontally with custom sizes possible. Systems can be configured with or without rear I/O card cage.
-
product
Type 12R2, 9U, 19" Rackmount, COTS MIL-Rugged
12R2-9U-PC
The 9U, 12R2 is designed to meet the harsh environment of shipboard, airborne, and ground mobile applications per MIL-STDs. Shock-isolated versions attenuate 25G shock to the chassis to less than 10Gs at the card cage.
-
product
Winding Resistance Meter 50Amps, 3 Channels Rack
WR50-13R
Raytech Digital Winding Resistance meter WR50-13R is the enhanced version winding resistance system with a most advanced demagnetizing circuit as a rack version. It is designed for high degree of accuracy for the measurement of very low resistance of any inductive loads.
-
product
DAQStream - Integrated Rack Systems
DAQStream rack systems deliver unmatched high-density, scalable, processing intensive solutions for the aerospace and defense industry. Supported applications include: scene generation, digital simulation, and hardware in the loop testing.
-
product
19" Storage Heavy-Duty Perforated Shelf, 30"D
SS-1930-PHD
Heavy-duty, 13-gauge steel perforated 19" shelf is 30" deep and bolts to panel mounting rails.
-
product
Systemkit 12K Rail | 19" subrack for railway
The best base for every customized 19" subrack for cPCI, VME or VME64 for railway applications. It supports many advantages like EMC shielding, climatic and mechanical resistance according to EN50155.
