-
product
Surface Mount Meters
National Meter Industries Inc.
Surface Mounted Single Phase Kilowatt Hour Meter.
-
product
TWT Rack Mount Test Set
Polarity designs and manufactures the most reliable Microwave Tube Test Sets in the industry. Polarity understands the delicate structure of microwave tube devices and has built an extensive product line supporting the manufacturing process.
-
product
Panel Mount Meters
The Coaxial Dynamics series of High-Power Panel Mount Meters are designed to measure RF power in 50-Ohm 1-5/8 to 6-1/8 inch coaxial transmission lines. Several different models are available with either 5/10/25 scales or 15/30/60 scales. The Panel Meter can be installed up to 200-feet from the Line Section with the permanently attached DC cables (10-foot normally supplied).
-
product
Flow Measurement Technologies
Emerson Process Management, the undisputed leader of industrial instrumentation, proudly provides the broadest array of measurement products for flow applications. We leverage years of industry knowledge and experience to offer increased plant efficiency and safety at lower installed cost.
-
product
Wall Mount Power Supplies
AC-DC Single Output
Although small in size, these mini-modules offer high performance at modest prices. All models, with series regulated outputs ranging from 1 to 75 volts and as high as 2.5 amps, may be mounted in an area only 3.5" x 2.5". Terminal strip input/output connections eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability.
-
-
product
SATCOM Technologies
General Dynamics Global Imaging Technologies
General Dynamics SATCOM Technologies is a global leader in satellite and wireless communications for video, voice and data. SATCOM offers a wide range of products and services for base station and earth station communications, VSAT antennas and antenna systems, and wireless backhaul infrastructure.
-
-
product
Gap Cover, G12/G12x, Rack Mount
310113433
Gap cover for use with rack mounting G12/G12x Receivers. The gap cover is not required if a rack extender kit is used.
-
product
Rack Mount Audio & Video Monitors
CENSUS Series
Working with audio is a complex endeavor. There are broadcast compliance challenges, ensuring that audio loudness thresholds are not exceeded. There are the quality control essentials that assure broadcast signal integrity. Depending on format, the number of signals to monitor and maintain range from very low to high density. MultiDyne acquired Census Digital in 2020 to problem-solve these broadcast and production audio challenges. MultiDyne’s rackmounted CENSUS Series provide reliable confidence monitoring for studios, mobile production and broadcast operations. Each addresses signal density needs for SDI, analog, AES/EBU,MADI or Dante IP audio, and simplifies how engineers visually and aurally monitor individual audio channels, adjust loudness levels and downmix channels. A consistent front panel design and intuitive UI assures a familiar user experience across all models while extracting audio information, setting key parameters and maintaining quality control.
-
product
Sensor Technology Engineering
Sensor Technology Engineering (STE) is the United States’ premier provider of radiation detectors for nuclear search in support of Countering Weapons of Mass Destruction (CWMD) and Explosive Ordinance Disposal (EoD) missions. STE is hyper-focused on the operational requirements of our users in Military, Federal, and First Responder organizations, and is committed to building the industry’s most sensitive and reliable equipment. A U.S. owned and operated company, STE assembles all of its products in Santa Barbara, California.
-
product
Diving Technology Test Systems
Ingenieurbüro Dr. Hillger Ultrasonic-Techniques
The imaging ultrasonic testing systems of the USPC 30XX series are optimized for testing a wide variety of materials and provide high-resolution findings in the form of A, B, C, D and F images. The hardware consists of an industrial PC, in which a motor controller and an ADC card are installed, as well as a HILL-SCAN pulser/receiver unit. An overview of the available systems is given in Table 1.
-
product
Materials Technology
The quality of the materials used is crucial for the technical innovation of a component. Our materials experts will support you in analyzing and optimizing materials so that every product can be manufactured in the highest quality. We will also be by your side as a competent partner in complex electron microscopic investigations and advise you in the practical development of modern materials.
-
product
Radiator Mounted Load Banks
RD-Series
RD-series radiator mounted load banks are designed to be fitted directly onto diesel generator sets. RD-series load banks use the engine cooling air from the generator radiator to cool the load elements.
-
product
Adjustable Mount
10710A
The Keysight 10710A adjustable optics mount makes alignment faster and easier. It is a convenient accessory for the Keysight 10700A and 10701A beam splitters, the 10705A interferometer, and the 10707A beam bender. It allows for 8 degrees tilt and yaw adjustments.
-
product
CHOPIN Technologies
Rheo F4
The Rheo F4 provides complete analysis of the proofing properties of flours by measuring the production of CO2, the volume of dough, as well as its porosity and tolerance during proofing.
-
product
Vision-Pad Technology
vPad Series
Vision-Pad Technology uses an Android tablet to function as the display and control unit for our vPad series of electrical safety testing device. Find out more about Vision Pad Technology
-
product
Rack Mount Thermometer Hygrometer
H3531R-2
Sensor H3531R is designed for online monitoring of temperature, relative humidity of air without aggressive substances. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs. High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.
-
product
Compact System for Chemical Analysis Technology
Small test system based on the LXinstruments OTP2 system platform. The system is used for assembly, final test and calibration of measuring instruments for chemical analysis in a high mix / medium volume environment.
-
product
Process Analytical Technology (PAT) And Data Analytics
Biopharmaceutical production processes have changed significantly due to overall titer improvements and the increasing development of single-use technologies. The introduction of robust and reliable single-use sensors further enhances the benefits of single-use processing concepts. They enable you to use Process Analytical Technology (PAT) approaches for effective automation and optimization.
-
product
Sensor Database Implementing Imc Plug & Measure Technology
imc SENSORS
imc SENSORS is a ready-to-go, universal database application for administering and editing sensor information. Along with values for smart sensors defined in IEEE P 1451.4 (TEDS), selections of additional sensor properties can be freely entered. These can be set, edited and viewed in freely configurable tabular views, e.g., the sensor's technical data information, as well as its calibration values.
-
product
Sensor Technology
Power Monitoring and Diagnostic Technology Ltd.
PMDT is the only manufacturer to utilize all 5 types of online partial discharge sensor technology. Using multiple sensing methods ensures that PD activity is always discovered, located, and characterized. PMDT's handheld PDetector and PDStar units have more capability than the high-end diagnostic equipment of the past. The small handheld, battery powered unit can completely perform the test and analysis without the need of a PC. PDetector, PDStar, and PDiagnostic instruments feature high-resolution phase-resolved analysis of PD signals (PRPD and PRPS) in real time, so you get your test results instantly!
-
product
Turning Mirror on Universal Mount
10769B
The Keysight 10769B Turning Mirror on Universal Mount deflects a laser beam at any angle, in either the vertical or the horizontal polarization plane of the beam. The 10769B contains the same turning mirror as the 10769A, but has a different mounting.
-
product
Rack Mount Stage Controller
RM-2000
Applied Scientific Instrumentation
*2U 19" Rack Mount Control Unit: 22.8D x 48.3W x 8.1H cm (9" x 19" x 3.2").*100 MHz Microcontroller for Faster Command Processing and Servo Control.*Closed-Loop DC Servo Control of up to Four Motorized Axes.*0-10 Vdc DAC Output for Additional Analog Control.*Firmware Upgradeable via Serial Connection.*Remembers Last Position on Power Up.*LCD Display Shows Axes Coordinates and Status.*USB or RS-232 Serial Control with Rates to 115200 Baud.*"Zero", "@", and "Home" Buttons on Joystick.*Left- or Right-Hand Joystick Unit.
-
product
Sensor Technology for Measuring Heat Flux, Humidity, and Temperature
Uval gt Building
uvalgt Building calculates the physical values that matter for buildings, such as heat flux (U-value), humidity and temperature. The measurement kit provides construction professionals with solid data during damage investigations, final inspections of construction work and renovation planning.
-
product
Technological Solution
Ducknet
The Duck Net system is the technological solution by Ducati Energia to create an energy management and monitoring system compliant with the standards ISO50001, ISO14001, ISO50001, directive 2012/27/UE, Italian law DL 4-7-2014 n. 102
-
product
Meters For Contact Angle And Surface Tension + Semiconductor Technology, Micro Scriber
SURFTENS HL Automatic
Optik Elektronik Gerätetechnik GmbH
Fully automatic contact angle meter for silicon wafers up to 12 inch The contact angle measuring system SURFTENS HL automatic is designed for use in semiconductor industry and research, in particular for process control of wafer coating and in the photolithographic process.
-
product
Virtual Interface Technology for 3D-IC Metrology
VIT
TSV profile (depth, top & bottom CD, tilt, SWA)-Residue Detection-RST-Copper Nail Height-Bump Height and Cu pillar height-Edge trim profile
-
product
Printer and MFP OEMsand Technology Providers
Printers and MFPs are part of a mature market and, as such, are subject to the price, feature and schedule pressures this maturity brings. Consumers are increasingly sophisticated and demand more feature-rich products at lower prices and lower costs of ownership. That makes it critical to get new products, with new features and technologies, to market fast while keeping development costs to a minimum.
-
