-
Product
Vertical Hinged Mounting Frame, 9050, 13U
310113613
Mounting Frame
This 9050 Vertical Hinged Mounting Frame allows the 9050 PXI Receiver to hinge down allowing access to instrumentation and wiring.
-
Product
Rack Mount Kit for RP7900 Regenerative Power System
RP7909A
Mounting Kit
The RP7909A rack mount kit makes it easy to integrate a RP7900 Series regenerative power system into a 19-inch EIA rack cabinet. This rack mount kit includes slide rails, and flange mounts (without ears).
-
Product
Fixed Mounting Frame, iCon, 1U, 2 Positions, Black Anodized
310113488
Mounting Panel
This iCon 2 position fixed mounting frame is 1U in height and is anodized in black. iCon cover plate sold separately (310 113 490).
-
Product
Mounting Panel, ICon, 6U, 4 Positions, With Slide Mounting (slide Kit Required)
310113540
Mounting Panel
The 6U Slide-Mounted Plate mounts to standard 19" racks and slides open to allow access to wiring between the instruments and VPC iCon receivers. The 4 cutouts are spaced evenly across the panel. iCon cover plate is sold separately (310 113 467). This mounting plate is designed to work with a slide kit and includes flanges and an instrument bracket. A slide kit is required for use.
-
Product
Mounting Flange Kit, G40x Slide Mount, for NI PXI-1085 Chassis
310113688
Mounting Kit
Mounting Flange Kit, G40x Slide Mount, for NI PXI-1085 Chassis
-
Product
Fixed Mounting Panel, i1, 2U, 8 Positions
310113517
Mounting Panel
The 2U Fixed Mounting Frame has 8 horizontal positions. i1 cover plate sold separately (310 113 546).
-
Product
Vertical Hinged Mounting Frame, iCon, 5U, 4 Positions
310113508
Mounting Frame
The 5U Vertical hinged Mounting Frame mounts to standard 19" racks and hinges open to allow access to wiring between the instruments and VPC Receiver. The 4 cutouts are spaced evenly across the panel. iCon cover plate sold separately (310113467).
-
Product
Fixed Mounting Panel, iCon, 4U, 8 Positions, Painted Gray
310113301
Mounting Panel
This 4U Fixed Mounting Panel has 8 vertical positions. The iCon cover plate is sold separately (310113467). The spacing of the positions will accommodate ITA P/N's 410123102 and 410123232. Also available in black anodized finish - P/N 310113302.
-
Product
Vertical Hinged Mounting Frame, G10, 5U
310113342
Mounting Frame
This G10 Vertical Hinged Mounting Frame is for use with standard rack, VXI, or PXI chassis. This mounting frame attaches to flanges supplied by the chassis manufacturer and allow the receiver to bolt directly on the mounting plate.
-
Product
Flush Mount Rack Kit For M9018A
Y1215B
Mounting Kit
Y1215B is a rack-mounting kit that suspends the chassis in a Keysight rack using 4 U of rack space. It includes rack flanges, handles, and attachment hardware.
-
Product
Vertical Hinged Mounting Frame, 9025, 8U
310113316
Mounting Frame
The 9025 Vertical Hinged Mounting Frame allows the 9025 Receiver to hinge down allowing access to instrumentation and wiring. This frame is 8U in height.
-
Product
IR Connectivity Bracket For U1240 Series Handheld Digital Multimeters
U1179A
Mounting Bracket
Use this bracket to attach your U1240 series handheld DMM to the U1177A IR to Bluetooth adapter or U1173A IR USB cable.
-
Product
Mounting Flange Kit, G40X, Receiver, Agilent M9019/Adlink PXES-2785
310113801
Mounting Kit
Mounting Flange Kit, G40X, Receiver, Agilent M9019/Adlink PXES-2785.Includes hardware required to mount flanges to the G40X EMI receiver, slide kit and Agilent M9019/Adlink PXES-2785.
-
Product
Module Accessory Kit, 26 4-40x .750" Socket Head Cap Screws
510109359
Mounting Kit
Module Accessory Kit, 26 4-40x .750" Socket Head Cap Screws
-
Product
Connector, PCB Mount, 25 Pin 1.27mm Pitch Micro-D, Male, Straight
C025CMX-1PS-0A
SCSI Male PCB Mount
This 25 pin micro-D straight connector is designed to allow users to create their own PCB based connection solution. Screwlocks are provided to secure the connector to its associated cable assembly. This connector is suitable for high density applications including connection to Pickering's LXI DIO/Trigger port via a suitable cable
-
Product
Rackmount Kit For Infiniium EXR-Series, 8U
EXR2RACK
Mounting Kit
The EXR2RACK rack mount kit includes all parts needed to mount your Infiniium EXR-Series oscilloscope in an 8U open frame rack and includes a Support tray, Trim plates, BNC connectors to be inserted into the bottom trim plate, black rubber stoppers to plug holes in bottom trim plate if the hole is not being used for a BNC connection, Two track rails, Two clamp brackets, both right and left Top clamp brackets, screws, and nuts.
-
Product
96-Pin SCSI Micro-D Right-Angle PCB
40-963-096-RF
SCSI Female PCB Mount
Accessory allows a user to create their own PCB based termination solution mounted directly on the front of the product or on the end of a cable. Interfacing PCBs should be designed with suitable clearances for the voltage the application requires.
-
Product
Rack Mount Kit For CX3300 Series
CX1903A
Mounting Kit
The Keysight CX1903A rack mount kit for the CX3300 series lets you easily stack your CX3300 mainframe in a rack.
-
Product
Vertical Hinged Mounting Frame, 5U, Blank
310113358
Mounting Frame
This blank 5U Vertical Hinged Mounting Frame allows the user to configure what receivers they would like to use. Fits on a 19" rack system.
-
Product
Rack Mount Kit For The InfiniiVision 2000 And 3000 X-Series Oscilloscopes
N6456A
Mounting Kit
Mount your InfiniiVision 2000 and 3000 X-series oscilloscopes in a rack; includes secure pouch for mechanical parts
-
Product
Chassis Mount Kit for PXIT 2000-514A/B, 14 Slot
310113374
Mounting Kit
The Chassis Mount Kit allows you to mount the Vertical Hinged Mounting Frame to a chassis. The row of mounting holes allow for adjustability.
-
Product
Dual Lock Link Kit
DAQA194A
Mounting Kit
The Keysight DAQA194A (5061-8769) dual lock link kit is recommended for side-by-side combinations and includes links for instruments of different depths. This kit can be used with the DAQA191A 2U Dual Flange Kit to mount two Keysight System II (half-width, 2U height - 88.1mm) instruments side-by-side.
-
Product
Advanced Power System Rack Mount Kit
N7907A
Mounting Kit
The N7907A rack mount kit can be used for all Advanced Power System N6900A and N7900A power supplies, regardless if they are 1 kW or 2 kW form factors. It can also be used for mounting the N7909A power dissipater unit.
-
Product
Adjustable Mount
10710A
Mounting Bracket
The Keysight 10710A adjustable optics mount makes alignment faster and easier. It is a convenient accessory for the Keysight 10700A and 10701A beam splitters, the 10705A interferometer, and the 10707A beam bender. It allows for 8 degrees tilt and yaw adjustments.
-
Product
Base for Optics Height Adjuster and Post
10784A
Mounting Panel
The Keysight 10784A Base provides a mounting plate for the 10785A Optics Height Adjuster and Post. The 10784A is an accessory complementing a family of measurement optics and lasers that constitute the 5530 Laser Calibration System.
-
-
Product
Surface Mount Meters
-
National Meter Industries Inc.
Surface Mounted Single Phase Kilowatt Hour Meter.
-
Product
Surface-Mount Noise Sources
-
Mercury’s family of surface-mount noise sources provides exceptional performance in a compact and easy to integrate package. These products are ideal for applications such built-in test and dithering circuits where the system requirements drive a need for compact, surface mount technology.
-
Product
3U Rack Mount Kit For Opt 1 CM
34193A
Mounting Kit
The Keysight 34193A (5063-9243) rackmount adapter kit is used to mount a single ½ module or two ¼ module width standard System II instruments 3U 132.6mm high instrument such as the Keysight E3631A to E3634A and E3646A to E3649A products.
-
Product
Vertical Hinged Mounting Frame, G18, 5U
310113322
Mounting Frame
This G18 Vertical Hinged Mounting Frames can be used with a standard rack or PXI chassis. These mounting frames attach to their respective chassis using our chassis mount kits and allow the receiver to bolt directly on the mounting frame.
