-
product
Spectrally Enhanced Imaging Colorimeter
LumiTop 2700
Instrument Systems Optische Messtechnik GmbH
The LumiTop 2700 combines the accuracy of Instrument Systems’ well-known spectroradiometer CAS140 series with the obvious advantages of imaging colorimetry. Our innovative design merges an RGB CCD camera and a flicker-diode with the high-end spectroradiometer CAS140 CT or D. Using the extremely accurate spectral information of the CAS140 measurements as reference, guarantees spectroradiometric precision across the whole 2D image.
-
product
Full 3D Inline Metrological & Imaging AOI
Metrological Full 3D AOI is achieved by measuring all 3 dimensions (X, Y and Height) to detect every measurable solder and component defect pre-reflow and/or post reflow soldering.
-
product
Imaging Photometer & Colorimeter
LumiTop 4000 / 2700
Instrument Systems Optische Messtechnik GmbH
The patented optical design permits simultaneous measurement of all three sensors in one shot. The accurate spectral measurement is used as a live reference and transferred to the complete display area of the camera. This makes for extremely short measurement times and all relevant optical tests are conducted in a single test station.
-
product
Thermo Imaging
Thermal Imaging SensorTP-L series is a compact infrared thermal imaging sensor utilizing a thermopile array detector.
-
product
Software Development Kit for 2D Imaging Sonar
Sonar Software Development Kit (SDK)
Teledyne BlueView offers a software development kit (SDK) for its 2D Imaging Sonar to enable integration onto complex platforms and/or customized systems for OEMs and vehicle manufactures. The SDK enables control of the sonar, and provides access to the raw data files to facilitate sonar operation and data flow-through.
-
product
Fixed-Mount Thermal Imaging Camera for Condition Monitoring and Fire Prevention
FLIR A310 f
FLIR A310 f thermal camera can be installed almost anywhere to monitor the condition of your critical equipment and other valuable assets. Designed to help safeguard your plant and measure temperature differences, they allow you to see problems before they become costly failures—preventing downtime and enhancing worker safety.
-
product
Ultra Compact, Uncooled Thermal Imaging Core
Dione 1280 OEM Series
The Dione 1280 OEM series is based on an uncooled 12 μm pitch microbolometer detector with a 1280 × 1024 resolution. The NETD is less than 40 mK (available upon request) or 50 mK.The cores are optimized for low SWaP (Size, Weight and Power). The overall size of the OEM core is 35 x 35 x 23.5 mm3 and weight is 27 gr. It utilizes Xenics image enhancement for advanced image processing while keeping power consumption low.All Dione 1280 versions have the same SAMTEC ST5 connector and are GenICam compliant. The ultra-compact Dione 1280 OEM series find application in safety and security systems, as well as in industrial thermal imaging systems.
-
product
Imaging Spectrograph
CP140
The CP-140 Imaging Spectrograph offers the OEM customer a sturdy, low-cost, f/2, modular instrument, with unsurpassed spatial resolution. High-efficiency, ion-etched, holographic gratings make the CP-140 the perfect spectrograph for use with multiple fiber inputs, linear arrays, and CCD type detectors. Selected gratings cover specific spectral regions from 190 nm to 2500 nm.
-
product
Thermal Imaging Surveillance Cameras
Shenzhen Everbest Machinery Industry Co.,Ltd.
Visible light digital camera640x480 resolution with flash provides sharp images regardless of lighting conditionsPicture-in-pictureDisplays thermal image super-imposed over a digital imageLED flashlightAllows the visual camera and fusion to be used in poorly lit environmentsWide temperature range: -20 to 400°C targeting electrical and industrial applications±2% accuracy reliable temperature measurementThumbnail view: easy to view and analyze images quicklyThe image rotationThe ability to automatically rotate the active imageAudio recorded with the video imageA speaker to listen to audio recorded with the video imageCapacitive touchscreenMore easy, productive and effective to operate itLi-ion rechargeable batteryLasts >4hrs continuous use, replaceableCopy to USBEasy uploads images from camera to USB memory cardArea (minimum/maximum) modeShows the minimum or the maximumTemperature reading in the selected areaInside Memory 100M bytesData and Live video transform between camera and PC or smartphone
-
product
Measuring Microscopes, Image Processing
Measuring Microscopes
Optik Elektronik Gerätetechnik GmbH
Image processing software for dimensional measurements, motorized measuring microscopes and fully automatic measuring machines.
-
product
Thermal Imager for Vehicle Situational Awareness with Protective Lid
ThermoVision SSL
The SSL camera is a vehicle camera system for driver's vision has a horizontal field of view (FOV) of 55 or 90 degrees. The system is composed of a thermal camera and a protective lid with an integrated lens cleaning mechanism.
-
product
Imaging Colorimeters & Photometers
Calibrated to replicate human photopic response to brightness and color, Radiant ProMetric® Imaging Colorimeters and Photometers are scientific-grade camera systems designed to make precise, spatial measurements of luminance and chromaticity. These systems are used to design and qualify light-emitting elements and devices according to how they will be visually experienced by human users.
-
product
Automatic Sprayer For MALDI Imaging
iMLayer AERO
The iMLayer™ AERO incorporates a sample stage that moves at a controlled rate while maintaining the same distance from the spray nozzle, enabling stable matrix spraying. Over multiple strokes, the sample becomes laminated with fine matrix crystals, enabling high sensitivity and high spatial resolution.
-
product
SWIR Image Sensors
Though NIR and SWIR act similarly to visible light, they are not visible to the human eye. As a result, these spectrums present valuable information which can show artifacts or damage that would otherwise not be seen. Click here to see some examples of how SWIR is being used in existing applications today.
-
-
product
1.3 Million Pixel CMOS Image Sensor
Sapphire 1.3M
This 1.3 million pixel Sapphire CMOS image sensor, designed on Teledyne e2v’s proprietary Eye-On-Si CMOS imaging technology, is ideal for diverse applications where superior performance is required. The innovative pixel design offers excellent performance in low-light conditions with both electronic rolling shutter and electronic global shutter, with a high-readout speed of 60 fps in full resolution. Novel industrial machine vision application features such as multi ROI and histogram output are embedded on-chip. Very low power consumption enables this device to be used in battery powered applications.
-
product
8k Wide Aspect Ratio CMOS Image Sensor
Snappy Wide
Snappy Wide is a new 8K wide aspect ratio CMOS image sensor designed specifically for logistics applications where larger conveyor belts are becoming increasingly common. A single Snappy Wide sensor can cover this large field of view successfully, replacing multiple sensors for a more efficient and cost-effective solution.
-
product
Optical Gas Imaging Camera
EyeCGas CO
Opgal Optronic Industries Ltd.
EyeCGas CO is a handheld OGI camera for CO gas leak detection. With this camera you can safely and remotely detect and locate carbon monoxide as well as other harmful gases emissions. It is also the only OGI camera that is certified for ATEX zone 2 and UL class I Div II, hazardous environments. The EyeCGas CO allows for routine and on-demand inspections in the steel manufacturing operations and other industries where CO emissions need to be closely monitored. With EyeCGas CO, Opgal helps you detect and repair toxic gas leaks inside the facility, whether in vent stacks or pipes, allowing video and audio recording while maintaining safety. Whether these toxic gases are part of the manufacturing process, or a byproduct of the production line, EyeCGas CO helps increasing safety and protect the environment.
-
product
3D Laser Imager
Vector-DD
The Vector 3D laser imager offers multi wavelength, full waveform data capture, coupled with the flexibility of an all-sky scanner. The Vector-DD is a direct detection (DD) 3D (range, angle, angle) active imager with an all-sky full hemisphere scanner. It employs a nodal point design so that all the lines-of-sight converge to a single point at the instrument*. In addition, two wavelengths can be transmitted so that differential reflectivity information can be derived. The unit is compact and portable and operates from 24V DC.
-
product
CMOS Image Sensors
Since 1999 ST has been an industry leader in the design and manufacture of imaging sensors. The current product portfolio spans a wide range of traditional image sensors from entry level VGA to 24 Mpixels and will soon offer products with 100’s of millions of pixels.
-
product
Acoustic Imaging Solutions
Visualize the unheard and the unseen with the power of fixed acoustic imaging solutions from Fluke Process Instruments. Fixed acoustic imaging enables users to detect, locate and visualize air and gas leaks or changes in sound signatures across their process and equipment in real-time before they become costly problems.
-
product
InGaAs Camera with High Image Resolution
Cheetah Series
The Cheetah 640 series is based on a cooled, in-house developed InGaAs detector with a 640 x 512 pixel resolution. The Cheetah 640 camera with single-stage TE-cooled detector offers high frame rates of either 400 Hz, 800 Hz or 1700 Hz while the version with three-stage TE-cooled detector offers a frame rate of up to 110 Hz. The camera comes with a CameraLink interface.
-
product
Advanced Thermal Imaging Camera
FLIR E96
The FLIR E96 is our first pistol-grip camera with 640 × 480 thermal resolution so inspectors can survey high-voltage, hazardous targets safely and quickly diagnose electrical and mechanical failures. Interchangeable AutoCal™ lenses offer complete coverage of near and distant targets, with the laser distance meter ensuring the crisp focus needed for accurate temperature measurement. The onboard FLIR Inspection Route runs pre-planned routes to help inspectors stay organized when surveying large or multiple locations. FLIR Ignite provides automatic uploading of E96 images directly from the camera to the cloud for easy, secure storage and sharing.
-
product
Award-Winning High Resolution Spectral Imaging Camera
4100H
HinaLea’s Model 4100H is an award-winning hyperspectral imaging camera with a built-in illumination source. It is recognized as the world’s first high-resolution, handheld, autonomous hyperspectral camera and that was awarded the SPIE Best Camera and Imager Prism Award in 2017. The Model 4100H is compact, lightweight and designed for field and factory use. It captures a high-resolution snap-shot image of an object, with spectra at each pixel for the visible (400 – 1000 nm) wavelength range in up to 550 bands. It features a color touch screen interface, battery operation and embedded object identification. It is ideal for medical imaging, precision agriculture, industrial machine vision and food and other quality inspection applications.
-
product
Optical Gas Imaging Camera
FLIR GF620
The FLIR GF620 is the first high-resolution, handheld camera from FLIR to detect methane and other volatile organic compound (VOC) emissions. With its ground-breaking 640 x 480 resolution IR detector, inspectors can check thousands of components and safely scan for gases from greater distances. It's also the first FLIR OGI camera to offer Quantification mode (Q-Mode) for streamlined set-up of the optional QL320 gas quantification system.
-
product
Industrial Imaging Multimeter with IGM™
FLIR DM285
The FLIR DM285 is a professional, all-in-one True RMS digital multimeter and thermal imager. Featuring Infrared Guided Measurement (IGM) technology powered by a built-in 160 x 120 FLIR thermal imager, the DM285 visually guides you to the precise location of an electrical problem without direct contact. You’ll pinpoint hot spots faster, safer, and more efficiently. The DM285 also helps streamline inspections by connecting wirelessly to FLIR Tools® app for uploading thermal images and measurement data.
-
product
Basic Thermal Imaging Cameras
PeakTech Prüf- und Messtechnik GmbH
For troubleshooting electrical and mechanical systems, as well as for a variety of other applications, this thermal imager offers an unbeatable price / performance ratio. The handy size and intuitive usability in combination with the technical possibilities of a thermal imaging camera allow the user in the service and development area to quickly and precisely identify any potential heat problems. Thanks to the integrated photo camera, the thermal images with time and date can be saved on the supplied SD card and thus easily documented. In addition, this device has five different color palettes for thermal imaging, as well as five overlay modes for photo to thermal imaging and a graphic menu.
-
product
Medical Imaging
ams offers high-speed, low-noise and low-power sensing solutions that enable manufacturers of Computer Tomography (CT) equipment and digital X-Ray Flat Panel Detectors (FPD) to produce crystal clear images while exposing patients to low doses of radiation. We are taking our leading imaging sensing solutions and expertise forward to achieve an unprecedented level of image accuracy while enhancing convenience and safety for the user.
-
product
Infrared Process Imaging Systems
Fully integrated infrared thermal imaging systems for glass processing, plastic extrusion coating, thermoforming machine control, kiln shell monitoring, gypsum wallboard production and more.
-
product
Ultrasonic Imaging System
USPC 3010
Ingenieurbüro Dr. Hillger Ultrasonic-Techniques
Detects internal defects in new materials and metals. The wide frequency range up to 35 MHz enables highestresolution. A-, C-, and D-scans can be recorded. The imaging in B-scans is an option.
