Bulk Current Injection
-
Product
High Current Probes (Power Electronics) HCF73317B230G300
1005059
-
The High Current Probes HCF73317B230G300 exemplify high-performance engineering tailored for power electronics applications. Designed as basic contact probes, these precision instruments feature a pitch of 4.00 mm (157 mil), ensuring compatibility with various setups. They can operate effectively across a temperature range of -45°C to +200°C, catering to diverse environmental conditions. With a continuous current capacity of 30 A and a low typical contact resistance of just 8 mOhm, they provide efficient electrical performance essential for modern electronic testing.
-
Product
Current Probe
PA-699
-
*High sensitivity: 1mA, High frequency: 1.5MHz. They are all 10 multiple calculation. Calculation is not making mistakes.*Max measuring current: +/- 40A DC / 80 Ap-p*Max sensitivity: ≧1mA*Bandwidth: DC ~ 1.5 MHz*Rising Time: 0.23 uS*Overload indicator*1V/A, 0.1V/A 2 ranges selectors*Input power switching (priority circuit) and battery available*Dispatching design, high durability
-
Product
Primary Injection Test Set
PI-6000
-
The PI-6000 is a rugged & durable primary injection test set capable of testing circuit breakers up to 6,000 amperes frame size. It incorporates an output transformer with dual primaries to facilitate its use on power sources of 480 VAC as well as 208-240 VAC. The unit also includes dual secondaries to provide optimal impedance matching to a wide range of circuit breaker sizes. An internal voltage sensor automatically configures the AC control power section to be energized only when properly configured for the applied voltage.
-
Product
High Current Probes (Power Electronics) HCF73311B140G150
1008184
-
The High Current Probes (Power electronics) model HCF73311B140G150, with order code 1008184, is designed for demanding applications requiring robust connectivity and precision. This probe operates effectively within a temperature range of -45°C to +200°C, making it suitable for extreme conditions typically encountered in power electronics. The probe boasts a continuous current capacity of 30A, ensuring high performance in various industrial settings. Its low typical contact resistance of just 8 mOhm further enhances efficiency and reliability during operation.
-
Product
High Current Probes (Power Electronics) HCF77307B300G300
1050889
-
Introducing the HCF77307B300G300 high current probe, specifically designed for power electronics applications, this probe stands out for its robust performance in demanding environments. This basic contact probe can operate within a temperature range of -45°C to +200°C, ensuring adaptability to various situations. Its innovative design includes a pitch of 3.50 mm, allowing for precise and stable connections in complex circuits, while maintaining a maximum travel of 5 mm for flexible probing.
-
Product
PXI/PXIe Wide Current Range Multiplexer Module, Dual 6-Channel, 2-Pole
40-514-104
Multiplexer Module
The 40-514-104 (PXI) and 42-514-104 (PXIe) are low density multiplexers in dual 6-channel, 2-pole configuration. They are capable of switching a wide range of current, from 10 μA to 2.5 A at 220 VDC/250 VAC. The current capability of the module permits the use of a single module type for both low and medium current test applications.
-
Product
Precision AC/DC Current Shunt
1625A
-
The BLI 1625A is a multiranging, high accuracy, active current shunt, for use in making NIST traceable measurements of currents from 10 microamperes to 100 Amperes. Very high measurement stability has been achieved in our shunt design by using special alloys, compensated by a proprietary Ballantine process to minimize temperature coefficient effects.
-
Product
Closed Loop Precise Hall AC/DC Current Sensor
CYHCS-LF
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can be used for accurate measurement of DC and AC current, pulse currents etc. The output of the transducer reflects the real wave of the current carrying conductor.
-
Product
Digital Volt Or Current Meter
CS1/CS2-VA
-
Measuring Voltage or Current for DC / AC / TRMS Accuracy: DC: +/-0.04% or AC: +/-0.1%; Display range: -19999~29999 User function, Easily programmable via the front panel. 1 relay, 1 Analogue output or RS 485 communication port in option with flexible functions. CE approved
-
Product
Logger version 2-D electro-magnetic current meter
INFINITY-EM AEM-USB
-
Infinity EM is an autonomously deployable EM (electro-magnetic) current meter with a data logger. Due to the principle, the instrument provides high accurate 2-D current measurements in even low scatter fields, where ADVs (Acoustic Doppler Velocimeter) has difficulties. The measurement range is wide from 0 to ± 500 cm s-1. The instrument design is compact (1.0kg in air). Infinity EM allows for current velocity measurements virtually anywhere.
-
Product
Split type Pulse Current Sensor
CTF-03
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
Suitable for the operation and cable continuity check of the equipment by pulse current detection method. Wide AC current range from 0.1mA to 8A. Ultra compact and light weight. High sensitivity and least affection from external magnetic field.
-
Product
Eddy Current Data Acquisition Unit
MIZ-80iD
-
The MIZ-80iD is an all-in-one integrated eddy current instrument, probe pusher, and control system that has transformed the way eddy current data is obtained.
-
Product
High Current Triaxial Cable, 4 A, VOLT:DC 60V
PX0104A
Triaxial Cable
The Keysight PX0104A is suitable for high current measurement up to 4 A DC. It supports the Keysight M9602/03A.
-
Product
PXI/PXIe Wide Current Range Matrix Module, 6x8, 2-Pole, Y Loop-thru
40-514-001
Matrix Switch Module
The 40-514-001 (PXI) and 42-514-001 (PXIe) are low density matrices in 6x8 2-pole configuration. They are capable of switching a wide range of current, from 10 μA to 2.5 A at 220 VDC/250 VAC. The current capability of the module permits the use of a single module type for both low and medium current test applications.
-
Product
High Current Probes (Power Electronics) HCF73517B400G300
1005054
-
The High Current Probes (Power electronics) HCF73517B400G300, with order code 1005054, are essential components for precise measurements in power electronics applications. Designed around a basic contact probe concept, these high-current probes exhibit a robust design with a remarkable continuous current capacity of 50A. Their operational temperature range of -45°C to +200°C enhances their reliability in varying environmental conditions, making them suitable for a wide array of applications in the electronics field.
-
Product
Secondary Current Injection Test Sets
-
Our range of units covers applications up to 200A and includes single phase and three phase units with applications for testing and timing of IDMT relays, thermal overloads, MCB’s and auto-reclosers.
-
Product
Injection Transformer
J2100A
-
The injection transformer is presently the prevalent method for connecting the network analyzer to the circuit being tested, and is primarily used for control loop stability measurements. The goal of the transformer is to inject a signal into the control loop being measured, without impacting the performance of the loop. In order to accomplish this to a reasonable degree, The transformer is isolated and therefore is capable of floating on a high voltage, such as a Power Factor Corrector (PFC), which is often close to 400VDC. Measuring voltages that exceed the voltage rating of the FRA inputs require attenuation probes.
-
Product
Current Tester
MIG1248
-
The MIG1248 is a current generator with wave shape 8/20. Maximum impulse current is up to 48kA supported by a 12kV impulse voltage making the MIg1248 ideal for testing large varistors. An intergrated test cabinet can accomodate test components up to 5cm cube.
-
Product
Portable Current Supply 10 AMP output
CS-10
-
The CS-10, Sure beats carrying around a rectifier and generator...
-
Product
AC Wide Frequency Current Shunts
-
High-performance, wide-band precision measurement standards used to convert alternating current (AC) into a proportional, measurable voltage output across a broad frequency range.
-
Product
Capacitors - Power - Heavy Current (ESTA)
-
Vishay ESTA is one of the few manufacturers to offer a complete range of power capacitors. These cost-effective devices for harmonic control, energy savings, and voltage stabilization are highly reliable and environmentally safe, and can be used under the most rugged conditions. Vishay ESTA power capacitors address a wide range of energy-generation applications. Their “green” applications include energy generation in on- and off-shore wind turbines and solar power plants.
-
Product
Digital Eddy Current Displacement Sensor
ZET 7140-S
-
A digital eddy current sensor consists of a primary transducer (eddy current probe) and the ZET 7140-S measuring unit.
-
Product
High Current Probes (Inverter Testing) HCB190B12MS73
1135082
-
The High Current Probes (Inverter Testing) HCB190B12MS73 are engineered to meet the demanding requirements of inverter testing applications. With an impressive temperature range from -45°C to +200°C, these probes excel in extreme conditions, ensuring reliable performance across various environments. The HCB190 model is designed for high-performance electrical measurements, featuring a continuous current rating of 450A and a typical contact resistance of just 0.30 mOhm, making it ideal for applications that require precision and reliability.
-
Product
Closed Loop Hall Effect Current Sensors/Transducerswith Rectangle Windows
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on closed loop compensating principle and can be used formeasurement of DC and AC current, pulse currents etc. The output of the transducer reflects thereal wave of the current carrying conductor.
-
Product
Handheld Digital Multimeter, AC/DC Current, AC/DC Voltage, Capacitance, Resistance, True RMS
72-2995
-
40,000 count industrial True RMS digital multimeter is a highly versatile handheld instrument boasts 5-1/2 digit TRMS accuracy. It provides AC/DC voltage and current measurement, resistance, capacitance, temperature and frequency measurement, displaying readings on a backlit LCD digit and analogue bargraph display. Other features include non-contact voltage detection, continuity and diode test and USB data logging. All this is housed in a rugged overmolded enclosure with carry case, test leads and USB interface cable included.
-
Product
High Current Probe HCF73317B400G150
1137879
-
The HCF73317B400G150 is a cutting-edge high current probe specifically designed for power electronics applications, ensuring optimal performance in demanding environments. Capable of operating within a broad temperature range of -45°C to +200°C, this basic contact probe caters to the needs of professionals in various fields requiring precise measurements in challenging conditions. With a continuous current handling capability of 30A and a nominal contact resistance of just 8mΩ, it ensures minimal signal interference and maximum accuracy for critical measurements.
-
Product
600 Amp DC / 400 Amp AC Current Probe
DC600
-
Can measure from 5 to 600 Amps DC current for most industrial DC measurement jobsNo batteries required, because power is supplied by PowerSight. This means that the probe will not stop during a long monitoring session.
-
Product
High Current Probes (Power Electronics) HCF72506B400G250
1029512
-
The High Current Probes (Power electronics) HCF72506B400G250 is designed for high-performance testing in power electronics applications. With an innovative basic contact probe design, the HCF725 provides robust functionality combined with exceptional reliability, capable of handling continuous currents of 50A. Its broad temperature range of -45°C to +200°C allows it to operate effectively in diverse environments, ensuring compatibility for various industrial standards and practices.
-
Product
150A, 12 MHz CURRENT PROBE, BNC, AC/DC, 150A rms, 300A Peak Pulse
T3CP150-12
-
150A, 12 MHz CURRENT PROBE, BNC, AC/DC, 150A rms, 300A Peak Pulse.
-
Product
4 Phase MICRO~Flex AC Current Probe
DRM 504/4
-
The new DRM 504/4 is a 4 Phase MICRO~flex AC current Probe utilising the Rogowski principle, with 4 channel integrator housed in DIN Rail Mounted Enclosure. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas and with large conductors.
