Filter Results By:

Products

Applications

Manufacturers

Analyzers

examine data methodically by separating into parts and studying their interrelations. AKA: Analysers

See Also: Analyze, Analytics, Analysis


Showing recent results 1621 - 1635 of 3732 products found.

  • Device Current Waveform Analyzers

    Keysight Technologies

    The dedicated Current Sensors measure from 100 pA level dynamic current up to 10 A with a maximum of 200 MHz bandwidth. The mainframe acquires the signal from the sensors by a maximum of 1 GSa/s sampling speed and 14-bit and 16-bit wide dynamic range. This combination allows you to measure quite wide range of dynamic current, for example, from standby/sleep state to active state, at a single measurement. In addition, the wide bandwidth and the high speed acquisition enable you to measure high speed pulse response even less than 100 ns previously very difficult with existing instruments.

  • Digital Circuit Breaker Analyzer

    CT-3500 S2 - Manta Test Systems

    The CT-3500 S2 is Vanguard’s second generation, stand-alone, digital, microprocessor-controlled, circuit-breaker timer. It measures the elapsed time from the instant a breaker coil is energized to the instant of opening or closing of a circuit-breaker’s dry contacts. In addition to timing a breaker’s contact response time, the CT-3500 S2 can also time relays or other switching functions that use an initiating trigger voltage (24-300 Volts DC or AC). The timer-triggering voltage starts three independent electronic timers. Each timer is individually stopped by its respective dry-contact closing or opening. The CT-3500 can fully analyze the timing of all circuit breaker operations (Open, Close, Open – Close, and Close – Open). Timing results are displayed in milli-seconds and cycles on the unit’s back-lit LCD screen and can be printed on the built-in 2.5-inch wide thermal printer.

  • Digital Laser Beam Analyzer

    ScienceGL, Inc.

    ScienceGL offers economic laser beam profiling solutions for laser beam measurement, diagnostics and analysis. The Digital Laser Beam Profiler allows you to analyze laser output quickly and accurately at fraction of the market price. The profiler utilizes our advanced computer graphics engine for best visual perception of the beam in 3D realistic representation. Traditional 2D plot colored by the look up table (LUT) is also available.

  • Digital Multi Channel Analyzer

    DT5770 - CAEN S.p.A.

    The DT5770 is a compact portable 16k Digital MCA for Gamma Spectroscopy, integrating analog front-end with programmable gain and possible AC coupling. It is ideally suited for high energy resolution semiconductor detectors, like HPGe and Silicon, connected to a Charge Sensitive Preamplifier (CSP). The unit can also properly operate directly connected to a PMT with inorganic scintillators (e.g. Nal or Csl scintillators), provided exponential pulse shape and decay time above 200 ns.

  • Digital Multi Channel Analyzers

    CAEN S.p.A.

    Dual independent 16k Digital MCA available in desktop and NIM from factors Dedicated to high resolution gamma ray spectroscopy.

  • DIGITAL OSCILLOSCOPE LOGIC ANALYZER

    BitScope DSO - BitScope

    BitScope DSO is much more than just oscilloscope software for your PC. It provides a full range of test instruments in one easy to use software package.

  • Dual Digital Multichannel Analyzer

    780 MCA Family - CAEN S.p.A.

    The 780 MCA family integrates advanced firmware algorithms operating Digital Pulse Processing for Pulse Height Analysis (PHA). The processing algorithms can be easily adapted to different detectors and application ensuring effective data analysis even at high count rates. It provides advanced tools for configuring baseline restoration, pile-up rejection. Thanks to the two input simultaneous acquisition, the modules are able to manage coincidence and anti-coincidence logic between detectors, allowing the user, for example, to easily take advantage of background rejection or anti-Compton techniques. These MCAs may provide at the same time energy, time stamp and the digitized pulse in a configurable time window (e.g. including the rising edge region) in order to perform further online analysis. Acquisition settings and basic mathematical analysis are performed through the CoMPASS and MC2Analyzer software, providing energy spectra with up to 16k channels, which can be exported and imported in ASCII or N42.42 compliant files. CAEN further provides drivers for the supported communication interfaces; configuration software tools, C and LabVIEW libraries (CAENComm, CAENDigitzer, CAENDPP), demo applications and utilities.

  • EMI Receivers and Click Analyzers

    PMM

    Narda offers a full range of FULL and PRE compliance receivers, even with FFT technology, covering the range 10 Hz – 18 GHz. As a small size, flexible and reliable, even with built-in LISN, allow you to perform conducted and radiated test in full compliance CISPR 16-1-1 and MIL-STD

  • ENA Vector Network Analyzer

    E5080A - Keysight Technologies

    9 kHz to 4.5/6.5/9 GHz, 2- or 4- port, 50 ohmWide dynamic range 152 dB (typical)Fast measurement speed 3 ms (401 points)Low trace noise 0.0005 dBrms (typical)High temperature stability 0.005 dB/CWide source power range 90 to +15 dBm (spec)Intuitive touch-based GUI on large, high-resolution 12.1" screenE5071C/8753 code compatibility Every spec verified, adjustments included Lock in support & peak performance from the start

  • ENA Vector Network Analyzer

    E5072A - Keysight Technologies

    30 kHz to 4.5 GHz & 8.5 GHz2-portImprove accuracy, yield and margins with wide dynamic range 130 dB / 151 dB (direct receiver access), measurement speed 7 m sec and excellent temperature stability 0.005 dB/C Increase test flexibility with wide source power range -109 to +20 dBm for linear and nonlinear device characterization Protect your investment with upgradability across all of the options Every spec verified, adjustments included Lock in support & peak performance from the start

  • ENA Vector Network Analyzer

    E5061B - Keysight Technologies

    Select the best configuration for your test needs from a wide variety of test set options: 100 kHz to 1.5 GHz/ 3 GHz, 2-port, 50 or 75 ohm, transmission/reflection or S-parameter test set Address a broad range of applications with the LF-RF option (Option 3L5/3L4/3L3): 5 Hz to 3 GHz, 2-port, 50 ohm, S-parameter test set, gain-phase test port, built-in DC bias source Combine network analysis and impedance analysis to customize your application in a single instrument (Option3L5/3L4/3L3 plus 005) Every spec verified, adjustments included Lock in support & peak performance from the start

  • ENA Vector Network Analyzer

    E5080B - Keysight Technologies

    As devices become highly integrated, complete characterization requires a complete RF and microwave measurement solution. The E5080B provides R&D performance up to 53 GHz and advanced test flexibility. Best-in-class dynamic range, trace noise, and temperature stability guarantee reliability and repeatability.

  • ENA Vector Network Analyzer

    E5071C - Keysight Technologies

    9 kHz to 4.5/6.5/8.5/14/20 GHz2- or 4-port, 50 ohm, S-parameter test set Improve accuracy, yield and margins with wide dynamic range 130 dB, fast measurement speed 8 ms and excellent temperature stability 0.005 dB/CObtain design confidence through complete characterization of high-speed serial interconnects with enhanced time domain analysis option Protect your investment with upgradability across all of the options Every spec verified, adjustments included Lock in support & peak performance from the start

  • EZ Test Texture Analyzer

    Shimadzu Corp.

    - For the Scientific Evaluation of Food - "My tester" performs rheology property evaluations on food and strength evaluations on medicines and pharmaceuticals. This tester can easily provide high-precision data with excellent reproducibility for a variety of fields whenever needed. It is useful in a wide range of fields since it can quantify the texture properties of foods, medicines and pharmaceuticals, such as bite texture, sensation and palatability, perform QA evaluation according to changes in hardness, and perform strength evaluation of food wrappings.

  • EZ-TorQ III Torque Analyzer

    Mountz Inc.

    The EZ-TorQ III makes torque control easier and more available across every aspect of the line from the calibration lab to the assembly station. Highly portable and user friendly, this battery powered torque validation hub can be easily carried around the assembly line to spot check tools as part of a QA program or used at assembly stations for quick and easy torque tool validation and calibration. The new smart phone like touch-screen interface breaks down barriers and ensures quick and easy validation of different ranges as needed.

Get Help