Product

Light Sources

-

Evident Scientific

Evident Scientific

These external units provide illumination which is transmitted to the viewing instrument by a light guide cable, and then through the scope via the integral fiber bundle to the viewing tip.

Product

Manual Fixture Kit

230371 – CMCSK-02-01

-

Columbia Elektronik AB

230371 – CMCSK-02-01 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

Fully Automated In-line Test System For LED Light Engines

-

A.T.E. Solutions Ltd.

A.T.E. Solutions Ltd.

We are pleased to announce that we have received an order for the supply of a fully automated in-line test system for testing LED light engines from ASD Lighting, based in Rotherham. The solution provided, consists of an in-line handler fitted with a vision system. The camera software is capable of learning the position of all LED’s on a new pcb, thereby reducing the time to introduce a new product. In addition to identifying the location of any missing or faulty LED’s the tester measures the colour temperature of every pcb. An image is taken of faulty units with the location of any missing LED’s identified

Product

Calibration Light Source

CAL1

-

Image Engineering GmbH & Co. KG

CAL1 - Image Engineering GmbH & Co. KG

The one light source solution in the field of camera characterization and calibration. CAL1The CAL1 calibration light source is designed to characterize and calibrate cameras in the lab or on the production line. Its compact design consists of one iQ-LED element in a 0.3 m integrating sphere that illuminates a 70 mm opening. Because of the non-reflective special diffusor filter on the sphere opening, a uniformity of more than 98% could be reached

Product

Evaporative Light Scattering Detector

ELSD-LTII

-

Shimadzu Corp.

ELSD-LTII - Shimadzu Corp.

The ELSD-LTII utilizes a high-efficiency LED and enhanced digital signal treatment to minimize noise and deliver optimum sensitivity for trace analysis. An innovative cell design also reduces band broadening and allows sensitivity levels below 200 picograms. The high-performance optical detection system can also be used for combinatorial chemistry and high-throughput screening applications. The new Low Temperature Evaporative Light Scattering Detector (ELSD-LTII) is an easy-to-operate, universal detector that identifies analytes with uniform sensitivity regardless of their spectroscopic properties. It is not a spectroscopic detector. Instead, it removes the mobile phase through evaporation and then makes a light scattering measurement of the dried analyte particles.

Product

LED Light Meter

-

Morris Products Inc.

Morris Products Inc.

LED Light Meter - Use LED Light Meter to measure LED light output.

Product

Test Stand, Fixture Design and Manufacture

-

Element

Element

As your partner, Trialon’s commitment to providing our customers with custom test stands, test and vibration fixtures that optimizes the sample test. Our experienced staff can design and manufacture a test stand or fixture for almost any product.

Product

System Test Fixture

-

IST Engineering, INC.

IST Engineering, INC.

Chassis Level Test Fixture, Set Box Test Fixture, and more by IST Engineering

Product

Light Meters

-

Beha-Amprobe

Beha-Amprobe

An instrument for measuring the intensity of light, used chiefly to show the correct exposure when taking a photograph.

Product

Manual Fixture Kit With Mass Interconnect Cassette Interface, Max number of probes (2N) 1000 units, Max UUT 450 x 330 mm (wxd)

CMCSK-07-01

-

Columbia Elektronik AB

CMCSK-07-01 - Columbia Elektronik AB

Linear click system with ball bearings, using gas springs.10 mm ESD-proof top cover with aluminum reinforcement bars.Steel base cabinet with detachable aluminum back and bottom panels.Detachable interchangeable case system with an 8 mm spring-loaded probe protection cover.Base cabinet fitted with a telescopic guide rail and catch.

Product

Vibration Test Fixtures

-

IST Engineering, INC.

IST Engineering, INC.

Enclosure level Vibration Test Fixture

Product

Light Sources

-

Inframet

Inframet

There are many low cost artificial light sources used for illumination or for industrial applications: tungsten or halogen bulbs, fluorescent lamps, LED lamps etc. Some of these sources have regulated intensity of emitted light. However, there very few calibrated light sources of precisely known parameters. A light source can be considered as calibrated when its user can precisely regulate its photometric/radiometric parameters like luminance (or illuminance), radiance (or irradiance) at defined spectrum of interest. Such light sources are needed in many applications among them, in systems for testing night vision devices, VIS-NIR cameras and SWIR imagers. Inframet offers a series of calibrated light sources that can be divides into three groups:

Product

13 Pin Towing Socket Tester ( For Halogen Light System)

7630

-

Peaceful Thriving Enterprise Co Ltd

7630 - Peaceful Thriving Enterprise Co Ltd

The tester is to connect with the 12V 13-pin Euro-type socket. It can also connect with 7 pin socket through a 13-7 pin towing adaptor. The cable is long enough for user to do the test while sitting in the vehicle. The tester can also do self-test (not work for 7 pin socket), 12V power check, ignition and reversing light. Not available for Newer car with LED light. CAUTION: The self-test is not available with 13-7 pin towing adapter because there is no continuous feed via the 7-pin socket.

Product

Topside Probing In-Circuit Test Fixtures

-

Circuit Check, Inc.

Circuit Check, Inc.

Circuit Check matches top side test targets to your specification and needs. The Signature Series pneumatic drive fixture is the industry standard for precision, accuracy and repeatability.Today’s fifth generation Pneumatic drive supports as many as 8,000 test probes with centerline spacing to 25mil, and contacting test pads as small as 0.014″.

Product

Rack Type Light Source

JW8007

-

Shanghai Joinwit Optoelectronic Tech,co.,Ltd

JW8007 - Shanghai Joinwit Optoelectronic Tech,co.,Ltd

Rack type light source is a new instrument with high output stability and good wavelength stability, which is developed by Joinwit Company using automatic optical power control (APC) technology and automatic temperature control (ATC) technology. It is an ideal instrument for measuring optical device characteristics, device aging, monitoring, experiment and other application fields in many optical device manufacturers, scientific research institutes and colleges and universities in the field of measuring optical device characteristics, device aging, monitoring and experiment. It is simple in application and design, easy to use and maintain, and widely used in the fields of optical communication, optical transmission, optical fiber sensing and other fields such as scientific research, production and engineering.

Product

Spectral Light And Color Meter w/ Flicker measurement

BTS256-EF

-

Gigahertz-Optik GmbH

BTS256-EF - Gigahertz-Optik GmbH

Spectroradiometer for the illuminance (photopic, scotopic, melanopic), spectrum, light color, color rendering index, and flicker. Cosine field of view illuminance measurement for accurate evaluation of extended illumination. Flicker measurement. Spectral measurement technology, required for LED light, color, color rendering, color effects. Photodiode for synchronization to pulse width modulated light and flicker measurement.

Product

Bench-top Optical Light Source

STC-BTOLS2201 series

-

Shanghai Stone Communication tech Co., Ltd

STC-BTOLS2201 series - Shanghai Stone Communication tech Co., Ltd

STC-BTOLS2201 series high stable Bench-top light source are microprocessor controlled laser diode sources which can support the variety of emitters such as: DFB,FP,PUMP,SLED etc. It is specially used in passive components testing, power meter calibration and general laboratory uses.

Product

Digital Light Meters

-

Labfacility Ltd.

Labfacility Ltd.

A selection of digital light meters including the GM1010 & GM1020 light level meters

Product

Test Fixture with API

TA-14VG

-

Tech-Aid Products

TA-14VG - Tech-Aid Products

The TA-14VG test fixture is based on the requirements for the Integrated Test Procedure for the VG-14A assembly as shown in the OEM maintenance manual. The panel also contains a test point breakout for the units main connector as well as one for the VG-401 base. The VG-401 breakouts provide an in series connection that will allow easy access to the gyro's signals and also provides a way to monitor rotor current. The panel also contains a variac to allow for line voltage adjustment.

Product

Fixtures For Testing

-

Columbia Elektronik AB

Columbia Elektronik AB

Columbia offers a wide range of different fixtures and test equipment that are possible to modify according to your needs of testing. Our range of different types of test fixtures goes from ICT, RF, General Purpose, CMP to CMK.

Product

USB Type-C Test Fixture | CB26U | Cable Harness Tester

-

CAMI Research Inc.

CAMI Research Inc.

A leader in development of PC-based cable and wire harness, continuity, resistance and hipot test systems for over 20 years, CAMI offers the CableEye suite of products complete with accessories – including “connector boards”. The selection of these test fixture boards is constantly growing and is currently numbering over 60 – most of which are populated with ‘families’ of connectors. When pre-populated boards are used, the tester GUI automatically displays a graphic of the connectors under test.

Product

Length Gauges For Measuring Stations And Multi-gauging Fixtures

METRO series

-

Heidenhain Corp.

METRO series - Heidenhain Corp.

*High repeatability*Very high system accuracy of down to: ±0.2 µm*Ball-bearing-guided and zero-backlash plunger*Variant with reduced gauging force*Very long measuring ranges of up to 100 mm*Interfaces: 1 VPP, TTL, 11 µAPP*Protection rating of up to IP67

Product

Light Meter

MODEL 5202

-

Kyoritsu Electrical Instruments Works, Ltd.

MODEL 5202 - Kyoritsu Electrical Instruments Works, Ltd.

Digital Light Meter 3 ranges changeable from low to high illuminance. (200/2000/20000lux) Data hold function. Digital light meter with separate light recieving sensor and meter.