Filter Results By:

Products

Applications

Manufacturers

High Frequency

High Frequency operating at 3–30 MHz.


Showing results: 736 - 750 of 1255 items found.

  • Schottky Barrier Ring Quads

    Naprotek, LLC.

    SemiGen’s Silicon Schottky Diodes are designed for applications through 40Ghz. The special process technology utilizes various metal schemes to provide excellent performance of Low, Medium, and High Barrier applications. The end result is a low resistance diode with tightly controlled capacitance which allows for optimum performance. Low conversation loss and superior TSS make these diodes ideal for detector / mixer applications with frequency ranges from S band to Ka band as well as modulators, lower power limiters and high speed switches.

  • Schottky Diodes

    Naprotek, LLC.

    SemiGen’s Silicon Schottky Diodes are designed for applications through 40Ghz. The special process technology utilizes various metal schemes to provide excellent performance of Low, Medium, and High Barrier applications. The end result is a low resistance diode with tightly controlled capacitance which allows for optimum performance. Low conversation loss and superior TSS make these diodes ideal for detector / mixer applications with frequency ranges from S band to Ka band as well as modulators, lower power limiters and high speed switches.

  • AC/DC Power Capacitors

    ACF Series - HK Film Capacitor Ltd

    For 70Vac~400Vac / 100Vdc~700Vdc Pulse Current requirement, please refer to our DC Pulse Current Capacitors for Power Electronic applications.For continuous and High RMS Current requirement, please refer to our High AC Current Capacitors LC series, which support continuous duty even at +105C.We manufacture AC Filter Capacitors for a wide variety of applications with different Capacitances, Voltages, Discharge Energy ranges, dv/dt, Pulse Discharge Currents, RMS Currents, frequency ranges, size restriction and even capacitor mountings.

  • Brinell Hardness Tester

    Qualitest International Inc.

    Using a carbide ball penetrator, and applying loads of up to 3,000 kgf, Brinell hardness tester following ASTM E-10 are widely used on castings and forgings. This method requires optical reading of the diameter of ball indentation, and using a chart to convert the average measurement to Brinell hardness value. We offer low cost handheld Brinell scopes as well as a popular line of Automatic Brinell Microscopes for high frequency of testing. . Qualitest also offers Automatic In-line hardness testers for high volume testing.

  • PXI RF Multiplexer, 10x SP4T, 1.3 GHz 75 Ω, Multiway Connectors

    40-755-210 - Pickering Interfaces Ltd.

    The 40-755-210 is a 10xSP4T 75 Ω multiplexer and is part of a range of high density RF multiplexers available in 50 Ω and 75 Ω variants with up to 10xSP4T switches in a single PXI module. They are available with two connector options; SMB that provides a frequency range of 1.8 GHz (50 Ω) / 1.3 GHz (75 Ω), or multiway which limits the bandwidth to 1.3 GHz but offers a high density solution occupying one PXI slot. The connectors used are fully supported by the range of Pickering Interfaces connection solutions.

  • Time Interval Counter

    GT210 Series - Guide Technology, Inc.

    The GT210 Time Interval Counters are animproved version of the popular GT200 TIC(since 1988) which are currently in use inthousands of applications ranging from satellite tracking to monitoring of atomic clocks.GuideTech’s TIC’s include all of the functions normally found on premium counters:Time Interval, Frequency, Period, Totalize,Ratio, Time Interval with Delay, and PulseWidth. Unlike many other boards of its kind,these instruments deliver worry-free results,and their inputs are high instrumentationquality, with the sensitivity and damage protection features common to all high qualitycounters.

  • Decade Capacitance Box

    1412-BC - IET Labs

    The wide capacitance range and high resolution of the GenRad 1412-BC decade capacitance box make it exceptionally useful in both laboratory and test shop. Owing to its fine adjustment of capacitance, it is a convenient variable capacitor to use with an Impedance Comparator. The polystyrene dielectric used in the decade steps is necessary for applications requiring low dielectric absorption and constancy of both capacitance and dissipation factor with frequency.

  • Frequency, Rate Meter, Flow Rate Indicator

    Laurel Electronics, Inc

    Two independent scalable pulse-input channels from 0 Hz to 1 MHz. Channels may be combined arithmetically. One channel can display total while other displays rate. High read rate for control applications: AC line frequency can be measured to 50.0000 or 60.0000 Hz in a few line cycles. Ideal for use as a tachometer or readout of a turbine flow meter.

  • High Power Noise Sources

    NS-7001 - Innovative Technical Systems

    The NS-7001 is high-power noise source specifically designed to operate in the 2.11-2.17 GHz UMTS band. It features flat output power that is regulated over a wide temperature range with high rejection outside the operating band of interest. Logic control is provided to enable/disable the noise source and an internal BIT function continuously monitors the output power. Other frequency bands and power levels are available.

  • IF-to-IF Converters

    Syntronic Microwave

    The new generation of wide-band and ultra-wideband tuners have output frequencies as high as 4 GHz and 6 GHz. These frequencies are often out of sync with adjacent and peripheral equipment. The IFAT-8000 has an input range up to 8 GHz, can process a BW of 1000 MHz (or lower) and can convert/translate the IF to a frequency and bandwidth that is manageable by downstream assets. As times and applications change, the IFAT can change with the new needs.

  • Inductive Sensors

    Bee Instruments

    Inductive Proximity Switches, self contained, depend on the output of an oscillator for their operation. The oscillator resonant circuit uses an open core coil to produce a concentrated high frequency electromagnetic (RF) field, which emerges from the active surface of the sensor. If a metal target (or other electrically conductive material) enters this field, eddy currents will be induced in it, causing the resonating oscillator to be damped.

  • Meter Pulse Duplicator

    SY27 - Synectic Electronics

    The SY27 range of meter pulse splitters, often called meter pulse duplicator are designed to split and isolate pulses from *between 1 and 4 meter signals. Each input will be split into 2 solid state relay outputs eg;4 in 8 out. It works with inputs from reed switch signals, with automatic de-bounce, as well as with high frequency pulses.

  • Professional Multimeter

    Shenzhen UYIGAO Electronic Technology Co., Ltd

    *This MultiMeter is a handheld digital multimeter, high reliability and portability, a perfect tool for the laboratory, factory and home.*It can measure AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, diode, continuity, NCV and temperature.*Moreover, more advantages such as backlight, data hold, auto range, true RMS, auto power off, low battery indication and over range indication.

  • RF/High Frequency Probes

    EverBeing Int'l Corp

    Everbeing is proud to distribute GGB Industries line of PicoProbes for customers everyday RF probing needs. The popular model 40A has been serving the needs of many high frequency researchers in the sub-40 GHz range. For more information on their products, visit www.ggb.com. If a product they sell is not shown here, we are still able to acquire for you. Please contact us for more details.

  • RF Microwave Components

    Radiall s.a.

    Specialized in passive RF microwave components, Radiall develops and manufactures a wide range of coaxial microwave components including terminations, attenuators, couplers, power dividers, filters and other specialized components. Our range covers a wide frequency spectrum from DC to 50 GHz, as well as low to high power, designed specifically for military, instrumentation, telecom and aerospace applications.

Get Help