Product

Ultra-slim Safety Light Curtain Type 4 PLe SIL3

SF4C

-

Panasonic Industrial Devices Sales Company of America

SF4C - Panasonic Industrial Devices Sales Company of America

The SF4C Series Ultra-Slim Safety Light Curtain has been designed to offer a safeguarding solution for machines to make them safe for the operators without sacrificing productivity. The ultra-slim size and shape of the SF4C Series (13mm) allow it to fit efficiently into small machinery while maximizing the usable working space for the equipment operator.

Product

Light Meter

LI-250A

-

Li-Cor Environmental, Inc.

LI-250A - Li-Cor Environmental, Inc.

The LI-250A is a portable meter that displays the output from any LI-COR light sensor that has a cable terminated with a BNC connector. It shows instantaneous values or 15-second averages of values from a sensor.

Product

Light Sources

-

Evident Scientific

Evident Scientific

These external units provide illumination which is transmitted to the viewing instrument by a light guide cable, and then through the scope via the integral fiber bundle to the viewing tip.

Product

Inverted Light Microscopes

-

Leica Microsystems

Leica Microsystems

Inverted microscopes from Leica Microsystems are designed to meet the rigorous demands of life science as well as material science and industrial applications.

Product

20mA/RS232/422 Strobe Mux III Card, Panel & Power Supply

9565-32CPP

-

Strobe Data Inc.

9565-32CPP - Strobe Data Inc.

32 serial port ISA compatible card connected by 4.8 ft (1.5m) cable and terminated as male DB25 connectors on external panel 14.5" high x 13" wide x 1" deep (645 x 330 x 25mm).

Product

3.4 MP Autofocus Low Light USB Camera Board With Liquid Lens

See3CAM_30

-

e-con Systems Inc.

See3CAM_30 - e-con Systems Inc.

See3CAM_30 is a 3.4MP UVC Compliant, low light, autofocus USB camera with liquid lens. It is a two-board solution with AR0330 CMOS image sensor from ON Semiconductor and USB 3.1 Gen1 type C interface board. See3CAM_30 is a colour camera with S-mount lens holder and does not require any special camera drivers to be installed in the host PC. See3CAM_30 is customizable and it is a Ready-to-Manufacture camera with all the necessary firmware built in and compatible with the USB Video Class (UVC). It consumes less power and doesn't heat up. There is no mechanical movement like in VCM motor for autofocus. Hence the life of the lens increases.

Product

Light / Lux Meter, 40000 lx, 0.1 lx, 157 mm, 54 mm, 34 mm

72-9195

-

Tenma

72-9195 - Tenma

Handheld light meter provides a live reading of luminance in most environments. Convenient size easily slips in your pocket or tool kit.

Product

Signal Light for Hipot Testers

LX-signal light-HV1

-

LXinstruments GmbH

LX-signal light-HV1 - LXinstruments GmbH

2-color indicator light, red, green.With the help of the signal light tower, you can visualize potentially high voltage.

Product

Light and Energy Meter

Model 659

-

OAI

Model 659 - OAI

UV Light and Energy Meter for use with all wafer steppers. For over 45 years, OAI is a world leader in UV Light and Energy Measurement Instrumentation used for reliable accurate calibrated control of the photolithography processes in the Semiconductor, MEMS, Wafer Packaging and Wafer Bumping Industries. The New Model 659 is an advanced UV exposure analyzer specifically designed for use with all wafer steppers including high intensity wafer steppers. This meter averages up to 400 exposure readings, has Ethernet and USB interface for downloading recorded measurements, and has intensity range of up to 7,500mW/cm2. Probes are available in wavelength of 365nm, 400nm, 420nm & 436nm. OAI has a complete certified calibration lab to maintain the performance, quality and reliability of our meters. The Model 659 meter is traceable to NIST standards.

Product

Ambient Light Sensors & Proximity Detection

-

ams-OSRAM AG

ams-OSRAM AG

ams supplies a family of products which combine an Ambient Light Sensor (ALS) and proximity detection in a single device. The ALS provides measurements of ambient light intensity which match the human eye’s response to light under a variety of lighting conditions, and through a variety of attenuation materials. The proximity detection feature allows a large dynamic range of operation for use over short distances and behind dark glass. These devices are intended for use in mobile phones, and over longer distances for presence detection in computer displays and monitors.

Product

Fiber Optic Light Souces

-

Optical Wavelength Laboratories

Optical Wavelength Laboratories

7-segment LED wavelength displayMultimode and singlemode readyDual-wavelength ports allow automatic wavelength switchingTest two wavelengths at a timeSC connectors (ST and FC available upon request)Bundle with Fiber OWL 7 optical power meters for automatic dual-wavelength Tier 1 certification

Product

CO,CO,light and Sound Measurement

-

Testo AG

Testo AG

Everyone is exposed to different environmental influences in their day-to-day lives. For example, in an average workplace illuminance, sound level, and indoor air quality are all significant factors that influence people's performance and well-being. Testo offers suitable measuring instruments for controlling each of the measurement parameters of lux, sound, and CO2 (for indoor air quality).

Product

Visible Light Source/Integrating Sphere

-

Santa Barbara Infrared, Inc.

Santa Barbara Infrared, Inc.

The Infinity VSX Series Integrating Sphere systems are ultra uniform, highly accurate broadband light sources.

Product

Robust Safety Light Curtain [Category4 PLe SIL3]

SF4B-□G Ver.2

-

Panasonic Industrial Devices Sales Company of America

SF4B-□G Ver.2 - Panasonic Industrial Devices Sales Company of America

SF4B-G Safety Light Curtains, Type 4, PLe - Robust Design

Product

Light Intensity Distribution Tester

HP860LED

-

Hangzhou Hopoo Optoelectronics Technology Co., Ltd

HP860LED - Hangzhou Hopoo Optoelectronics Technology Co., Ltd

It is specially used to measure the photoelectric parameters of LED light distribution curve (LED light intensity distribution), beam angle, normal light intensity, forward voltage, reverse current, reverse breakdown voltage and other photoelectric parameters, in line with CIE pub.No. 127 condition A or B. This system achieves high-precision testing of the optical and electrical properties of LEDs, provides LED manufacturers with sufficient LED optical and electrical parameters, and makes the development and production of LEDs more effective and reliable.

Product

Light Meters

-

PCE Instruments

PCE Instruments

A light meter is a very sensitive electronic measuring device used to help monitor the illumination of any given area. Most light meter devices are small in size, simple to operate and equipped with an easy-to-read lighted screen made of special glass. Typically, a heavy-duty housing protects the light sensor inside the light meter from damage. A light meter is used for measuring brightness in lux (lx), foot candle (fc) or candela per square meter (cd/m²)measuring units. Some light meter devices are equipped with an internal memory or data logger to record and save measurements. The measurement of light intensity with a light meter is becoming increasingly important in the workplace due to safety concerns. Light measurement is also necessary to determine the best location and angle when installing and adjusting solar panels.

Product

Light / Lux Meter, Calibrated w/Data, 50000 lx, 100 lx, 4 %, 185 mm, 78 mm, 38 mm

72-7250 CAL D

-

Tenma

72-7250 CAL D - Tenma

The 72-7250 CAL D from Tenma is a digital light meter with RS232 capability. It has custom one-chip microprocessor LSI circuit which ensures high accuracy. The meter features 13mm (0.5”) super large LCD display with contrast adjustment for best viewing angle, data hold and auto power off. It records maximum, minimum and average readings with RECALL facility. The 72-7250 has RS-232 PC serial interface, user selectable lighting type (tungsten, fluorescent, sodium or mercury, daylight) and zero adjustment by push button. The meter operates from 9V battery.

Product

Spectroscopy Lamps and Light Sources

-

StellarNet Inc

StellarNet Inc

The StellarNet portable Light Sources facilitate measurements in the UV, VIS, and NIR for various samples and application types using standard SMA-905 optical connectors. These low cost modular components are robust, reliable, and designed to last in portable and industrial environments.

Product

Lights and Illumination

-

Edmund Optics Inc.

Edmund Optics Inc.

Lights and Illumination

Product

Light Source

UVF-204S

-

SAN-EI ELECTRIC CO.,LTD.

UVF-204S - SAN-EI ELECTRIC CO.,LTD.

This is the ultra compact and light weight high power unit fully utilizing characteristics of the high stability and long life 200watt mercury xenon lamp.

Product

Light Meters

-

MRC ltd.

MRC ltd.

Using a light meter you can track light levels anywhere and with a fast, stable and accurate sampling result.The result can be seen in a large digital LCD display.

Product

C+L Band Broadband Light Source

S-103

-

Notice

S-103 - Notice

ASE broadband source slot module of FOTS system can offer special function that is able to change optical output spectral feature variously, which is change optical output spectral feature variously, which is followed by user’s driving embedded pump LD freely. The output power of each pump LD is controlled separately by the program that is set up by user. In the case optimum ASE source output features such as wide broadband (> 80 nm @ -10 dBm/nm) and stable output power (< 0.02 dB) is needed, it is made up so that the provided Default mode along with User mode can be chosen and set up. More stable application of ASE source is possible through the combination of monitoring of ASE output power, alarm status and pump LD status with real-time optimal feedback. The embedded FPGA processor makes high speed control possible and enables monitoring and feedback routine operated stably.