Product

Optical Receiver Stress Test Solution

N4917B

-

Keysight Technologies

N4917B - Keysight Technologies

The N4917B software provides an automated standard compliant stressed receiver sensitivity test according to 100GBASE-LR4, ER4 and SR4 test specification. In order to do this kind of test, several test instruments such as a bit error ratio tester, digital sampling oscilloscope, optical reference transmitter and tunable laser source are required to operate together to achieve a compliant, repeatable optical stressed eye. This stressed eye is then fed to the receiver under test, where bit error ratio is measured under the stress conditions as defined in the standard.

Product

Module, Receiver, RTCASS, Coax, 64 Position, Center PCB Mount510113143

510113143

-

Virginia Panel Corporation

510113143 - Virginia Panel Corporation

Module, Receiver, RTCASS, Coax, 64 Position, Center PCB Mount.

Product

HDMI 2.1 Receiver Compliance Test Software

N5991HP1A

-

Keysight Technologies

N5991HP1A - Keysight Technologies

N5991HP1A HDMI electrical performance validation and compliance software solution offers a complete test execution environment for validating and troubleshooting the electrical performance of HDMI 1.4 and HDMI 2.1 sink devices.

Product

High Speed Optical Receiver Modules

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

Macom High Speed Optical Receiver Modules

Product

Low Cost Microwave Wideband PIN Preamp Receivers

MR21 (40KHz~18GHz)

-

Hangzhou Huatai Optic Tech. Co., Ltd.

MR21 (40KHz~18GHz) - Hangzhou Huatai Optic Tech. Co., Ltd.

MR21 series microwave wideband optical receiver, adopts High linear PIN diode and Low noise pre-amplifier IC, within bandwidth of 40KHz~18GHz, they are featured with excellent linearity, high responsibility and superior flatness of the RF response in both, power and phase. They provide an outstanding linearity fiber optical communication for analogue wideband microwave application. Due to avoidance of using expensive coaxial cable or wave guide, there will be no limitation in transmission distance, which improves the signal quality and reliability of the microwave communication. They can be widely applied in microwave communication system such as remote wireless, timing and reference signal distribution, telemetry, measurement and delay line etc as well as 10Gb/s and 18Gb/s high speed communication system.

Product

Digital Wideband Receiver Family

IZT R3000

-

IZT

IZT R3000 - IZT

The IZT R3000 is a professional digital hf, vhf and uhf receiver. Its world-class rf performance and state-of-the art digital signal processing make it the ideal sensor for direction finders, signal recording and COMINT systems. The IZT R3000 has been ordered by the German Federal Network Agency as ITU-compliant Monitoring Receiver.

Product

MIPI D-PHY v2.1 Receiver Conformance Test Software

N5991MD2A

-

Keysight Technologies

N5991MD2A - Keysight Technologies

The Rx solution including Station Configurator and Valiframe maximizes the usage of test instruments, providing automated system calibration as well as conformance testing according to the D-PHY 2.1 test specification (CTS)

Product

2 Way GPS / GNSS Signal Splitter Passive, 1-2 GHz, SMA, DC Block+200Ω Load 2 Ports

GPS212

-

INSTOCK Wireless Components, Inc

GPS212 - INSTOCK Wireless Components, Inc

GPS L1 - L5, GLONASS, Galileo splitterLow Insertion Loss (0.2 dB avg)High Port to Port Isolation (30 dB avg)Excellent VSWR (1.10 : 1 avg)15 VDC & 75 mA max on DC block portsTri Alloy SMA Female (Jack) 50 Ohm

Product

GPS, GLONASS, Galileo Micro Splitter 2 Way, SMA, 1176.45 - 1602.00 MHz, 50 Ohm, Passive

GPSL10

-

INSTOCK Wireless Components, Inc

GPSL10 - INSTOCK Wireless Components, Inc

GPSL10 is a two way, passive, GPS signal splitter ideal for splitting a GPS antenna signal between two receivers while providing a DC current path to power a remotely located active GPS antenna from one receiver while blocking the DC path from the other. Max voltage rating is 50 VDC; maximum current rating is 1000 mA. Furnished with SMA female connectors all ports. Being a "micro-sized" splitter, GPSL10 weighs only 21 grams and is suitable for applications requiring low-weight parts.

Product

Indoor Mini Optical Receiver

SR1020

-

Hangzhou Softel Optic Co., Ltd.

SR1020 - Hangzhou Softel Optic Co., Ltd.

Designed for FTTH(Fiber To The Home) networks ●Excellent linearity and flatness●Wide range of optical input power ●Single-mode fiber high return loss ●Using GaAs amplifier active devices ●Ultra low noise technology ●Smaller size and easier install ●Red-LED for power indication ●Color-LED for optical power indication●Double color LED for optical power indication (Non-lighted: optical power<-10dBm, Green:-10dBm+3dBm)

Product

Receiver Conformance Test Application for IEEE 802.3bm

M8091BMCA

-

Keysight Technologies

M8091BMCA - Keysight Technologies

IEEE 802.3bm Receiver Test Application for 25GAUI-1 Chip-to-Module, Chip-to-Chip, Cable and Backplane.

Product

Dual Channel Digital Receiver

MS 1740

-

Meltronics Systemtech

MS 1740 - Meltronics Systemtech

Dual Channel Digital Receiver is a complete high−frequency dual−channel A/D converter capable of sampling rates up to 210 MHz. It accepts two front panel analog inputs and delivers digital output samples over four FPDP (Front Panel Data Port) connectors utilizing FPDP standards. The Dual Channel Digital Receiver features two 12−bit Analog Devices AD9430 A/D Converters, and two user−configurable Xilinx® Virtex−IV Series FPGAs. It also features a VME A64/D64 slave interface for setting up operating modes and selectable A/D range, and optionally provides 32−bit access from the VMEbus to the FPGAs. It is an ideal system as a high−speed data acquisition front end for real time recording and digital signal processing systems.

Product

AGC, SNMP Bi-Direction Optical Receiver

NGB9921

-

Hangzhou Huatai Optic Tech. Co., Ltd.

NGB9921 - Hangzhou Huatai Optic Tech. Co., Ltd.

Huatai NGB9921, is a type of high-grade AGC, Network management, Bi-direction, outdoor optical receiver. Various operating parameters of machine are microprocessor-control, ATT. Optional network transponder, implement remote network management.

Product

Receiver Products

-

Nearfield Systems, Inc.

Nearfield Systems, Inc.

Designed specifically for high performance antenna testing, we use the latest technology to design and manufacture the fastest and most powerful system receivers in the industry. Antennas have become complex and tightly integrated RF system components, requiring more than traditional analog input receivers. Our advanced digital receivers provide analog and digital inputs, in addition to features such as pulsed measurement capability and high resolution pulse profiling, to meet these demands.