Filter Results By:

Products

Applications

Manufacturers

Audio

electrical conversion of a sound pressure wave.

See Also: Sound, Ultrasound, Infrasound, Reverberation, Acoustic, Video, AV


Showing results: 571 - 585 of 858 items found.

  • Blackfin Embedded Processors

    Analog Devices Inc.

    Blackfin® 16-/32-bit embedded processors offer software flexibility and scalability for convergent applications: multiformat audio, video, voice and image processing, multimode baseband and packet processing, control processing, and real-time security.

  • IP Video Stream Analysis And Monitoring

    TSM100 - Mividi, Inc.

    The Mividi TSM100 is an MEPG transport stream analyzer and IP video monitoring system for monitoring the quality of digital video services (QoS) delivered via IP or ASI interfaces. It can simultaneously monitor up to 300 services and perform deep MPEG analysis and video quality check 24 x 7. The system can be used for analyzing MPEG-2, H.264 and HEVC programs delivered over the Internet, as well as head-end equipment that uses IP for video transmission. The TSM100 provides IP layer analysis, MPEG transport layer analysis, key frame decoding, audio loudness measurement and service profiling. The system receives IP encapsulated digital audio and video data via 1 Gbits or 10Gbits Network adaptor. It will monitor all media flows in the network, perform extensive tests on standard compliance and user profile matching, and generate alarms when TS, video or audio errors occur.

  • General Purpose Lab Oven

    REXMED ROV-180 - REXMED Industries Co., Ltd.

    MOD. ROV-180, AC 110/230V, Plug type: , General purpose lab oven, dry air / hot air sterilizer, HS CODE: 841780, UNCCS CODE: 447483, UMDNS CODE: 14410, Main construction: powder coated steel and SS304, Controller: Microprocessor based PID controller, water proof keypad with timer, ˚C/PV and ˚C/SV display and setting, Timer: 9999/min, 9999/hr, Timer has DELAY_ON and DELAY_OFF function and at the end of operation audio and visual warning, Working range: Ambient +5˚C~250˚C, Stability at 37˚C: ±0.2˚C, Uniformity at 150˚C: ±1.5˚C, Sensor: PT 100Ω, Temperature audio and visual warning for AL-H and AL-L and OFS correction setting, Heater: 600W X 2pcs, Chamber: L40 X W40 X H50cm, Capacity: 80L, chamber with key lock, W/S: shelf X 2pcs

  • General Purpose Lab Oven

    REXMED ROV-150 - REXMED Industries Co., Ltd.

    MOD. ROV-150, AC 110/230V, Plug type: , General purpose lab oven, dry air / hot air sterilizer, HS CODE: 841780, UNCCS CODE: 447483, UMDNS CODE: 14410, Main construction: powder coated steel and SS304, Controller: Microprocessor based PID controller, water proof keypad with timer, ˚C/PV and ˚C/SV display and setting, Timer: 9999/min, 9999/hr, Timer has DELAY_ON and DELAY_OFF function and at the end of operation audio and visual warning, Working range: Ambient +5˚C~250˚C, Stability at 37˚C: ±0.2˚C, Uniformity at 150˚C: ±1.5˚C, Sensor: PT 100Ω, Temperature audio and visual warning for AL-H and AL-L and OFS correction setting, Heater: 700W X 2pcs, Chamber: L50 X W50 X H60cm, Capacity: 150L, chamber with key lock, W/S: shelf X 2pcs

  • HDBaseT Transformers

    Pulse Electronics

    Pulse HDBaseT transformers are designed to provide common mode noise reduction for improved EMI performance and support power over HDBaseT (PoH) applications of up to 100W. The HDBaseT technology enables 5Play feature set, which includes ultra high definition 4K video, audio, 100BASE-TX Ethernet, various control signals, and up to 100W of power, on a single 100m/328ft CAT5e/6 cable.

  • Laser Warnings Systems

    Elbit Systems of America®

    Elbit Systems of America’s laser warning systems use both coherent and non-coherent laser sources. We understand the full scope of issues associated with each laser threat and have the systems engineering expertise necessary to accurately and reliably detect, locate and categorize these threats. Each LWS is equipped with a direction indicator and provides complete threat coverage in a high dynamic range with audio and visual warnings.

  • Stationman Speaker Probe

    250 SSP - Aines Manufacturing Corp.

    This probe is designed for those technicians that want the best tool available. The Model 250SSP is supplied with a cone-shaped tip and a duckbill tip that is longer and flatter, permitting insertion into larger cables, or cables under tension where slack cannot be obtained. Another feature is the built in speaker for audio without the need for a butt set or headset. The speaker is operated by a slide switch that has a "lock" position for continuous monitoring.

  • Acoustic Measurement Systems

    AuSIM Inc.

    Even AuSIM's audio simulation is only as good as the model parameters within the simulation. For AuSIM, deriving optimal model parameters begins with studying the acoustic world around us. The AuSIM3Dtm display systems synthesize a virtual aural environment from parameters based on the physical world. But the same techniques can be applied to reverse the process and extract parameters from the physical world to use for later synthesis.

  • Amplifier Dyno

    AD-1 - D'Amore Engineering llc

    The AD-1 Amplifier Dyno is a tool that is designed to be used any place an amplifier exists. It can be used in a lab or production line to test true amplifier power output, quickly and easily. It is simple menu driven, does not require a computer, and cannot be cheated as the load banks are internal. It can be used in an automotive audio install shop to test true amplifier output while the amplifier is installed in the customer's vehicle.

  • Analyzer

    ONYX Apps

    The Analyzer is a combination of a sound pressure level (SPL) meter and a full range multiple bands frequency analyzer. It is mainly designed for audio professionals who need to evaluate different working environments (e.g. studios, live stages)... that’s why it’s perfect for anyone who’s in need of acoustical analysis!! It is easy to use and comes with amazing features only known from professional acoustic tools.

  • Portable Data Loaders

    Avionics Interface Technologies

    The AIT PDL solutions are designed for ease of use by the flight-line maintenance engineer. All PDLs features a simple user interface that provides visual and audio alerts when load operations are completed. The User Interface is intuitive and easy to use, eliminating the need for time consuming software training. All Data Loading activity can be logged, and any error conditions are timestamped and logged for post analysis and troubleshooting.

  • Transcoder

    SFT3702 - Hangzhou Softel Optic Co., Ltd.

    SFT3702 is a HD IP decoder designed by SOFTEL Digital with proprietary intellectual property rights. It is a 1-U case supporting both IP and ASI input. After decoding process, it outputs 2 channels of HD/SD-SDI videos with dual stereo audios embedded in each port. It also supports 1 IP (MPTS) output and featured with dual bi-directional ASI ports for input and output alternatively.

  • Non-Contact Magnet Detector with Built-In Flashlight

    Extech MD10 - Extech Instruments Corporation

    The MD10 is a non-contact magnet detector with built in flashlight. A Blue LED lights up indicating the presence of a magnetic field including AC, DC and permanent magnets without contact. Applications include, testing audio speakers, Troubleshoot solenoid valves in pneumatic and hydraulic control equipment, testing relays with coils and electrically controlled solenoid valves in vehicles and machinery. Complete with two AAA batteries.

  • NAV Pro AV Over IP

    Extron Electronics

    Distribute lossless video, audio, USB, and Ethernet with ultra-low latency over standard 1 and 10 Gbps IP networks at exceptionally low bit rates. Utilizing Extron’s patented PURE3® codec, the NAV® system delivers groundbreaking performance with real-time, lossless video at resolutions up to 4K @ 60 Hz with 4:4:4 chroma sampling and ultra-low latency.

  • Noise And Vibration Analysis System

    CRY2300 Series - Hangzhou JiGao Electroacoustical Science and Technology Co.,Ltd

    The host of CRY2304 / 2308 noise and vibration analysis system uses USB2.0 interface, and communicates with the host computer through USB Audio and USB HID equipment. At present, the hardware provides four-channel version CRY2304 and eight-channel version CRY2308. The number of channels is flexible and can be selected according to requirements. At the same time, a single device supports simultaneous input of noise and vibration signals for independent analysis.

Get Help