Product

BNC (F) To Multi-Stacking Banana Plugs

3073

-

Pomona Electronics

3073 - Pomona Electronics

BNC (f) to multi-stacking banana plugs

Product

Banana Plugs and Jacks

-

Pomona Electronics

Pomona Electronics

Banana plugs and jacks are used to carry dc and low-frequency signals. They are commonly used on power supplies and multimeters.

Product

Banana Plugs

-

AST Labs

AST Labs

Fully retractable sheathed banana plugProtects contact pin surface from dust and damageConverts regular banana plug into sheathed banana plug leads

Product

AC/DC Clamp Meter

2660 CL

-

Standard Electric Works Co., Ltd

2660 CL - Standard Electric Works Co., Ltd

● 4000 counts.● Voltage measurement, current measurement, resistor measurement, frequency counter, capacitor measurement.● Bargraph indication.● Range change function.● Data hold function freezes the reading.● REL function.● Peak function.● Diode measurement.● Max / Min function.● Continuity check.● Low battery indication.● Auto Power Off (APO) function.● Safety design throughout with no exposed metal parts, shielded banana plugs and recessed input terminals.

Product

BNC (M) To Stacking Pin Tip Plugs

3901

-

Pomona Electronics

3901 - Pomona Electronics

BNC (m) to stacking pin tip plugs. Miniature banana plug springs are gold plated Beryllium Copper for excellent electrical connection.

Product

Decay Accessory Set

PGB-745

-

Prostat Corporation

PGB-745 - Prostat Corporation

- Designed for measuring charge movement and decay time of ESD controlled materials- The set consists of two stainless steel electrodes and two very high resistance test leads selected for this application- The high resistance leads minimize leakage during the test cycle and are equipped with male banana plugs

Product

18 Inch Universal Flex Current Probe Accessory

FLIR TA74

-

Teledyne FLIR

FLIR TA74 - Teledyne FLIR

The FLIR TA74 adds capabilities, simplifies challenges, and gives you the best readings with your existing meter. The narrow, 18-inch long flexible coil clamp and locking mechanism allows you take measurements in tight or awkward spots – ideal for multiple conductor measurements, double-wrap requirements, and deeper access. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.

Product

Electronic Dmm Test Lead Kit For Hand-Held Meters

5543B

-

Pomona Electronics

5543B - Pomona Electronics

Electronic DMM test lead kit for hand-held meters. Test leads with a right angle banana plug are ideal for use with hand held digital multimeter. Flexible test leads feature high strand count silicone wire for extreme flexibility and high temperature resistance.

Product

Terminal Test Kit (19 PCS)

3604

-

Peaceful Thriving Enterprise Co Ltd

3604 - Peaceful Thriving Enterprise Co Ltd

1. Checks voltage on 6, 12 and 24V systems.2. 12-feet flexible rubber wire with spring relief.3. Tough plastics handle lights up if circuit is good.4. 4mm connection for banana plugs.5. Facilities the measurement on connectors and components without destroying the insulation or the plug connection.

Product

Other Switching Power Supplies

-

PeakTech Prüf- und Messtechnik GmbH

PeakTech Prüf- und Messtechnik GmbH

The switching power supply technology used ensures high performance with a small size and low weight. 6 different DC output voltages (3 V / 4.5 V / 6 V / 7.5 V / 9 V and 12 V) can be set using a slider. With the 4 mm pole terminals, you can easily connect single wires but also 4 mm banana plugs. The power cord with an Euro plug is firmly connected to the power supply unit, whereby the device is switched off and on via a rear power switch. This handy power supply fits on every work bench and can be used universally in the hobby area, service or training.

Product

Output Signal Cable

CO20-x

-

SENIS

CO20-x - SENIS

The Output Signal Cable CO20-x is a specialized accessory designed specifically for the F3B analog magnetic field transducers. This product enhances the performance and versatility of the transducers, which have been improved and developed to work seamlessly since January 2023. The CO20-x cable facilitates reliable signal transmissions, critical for accurate measurements in various applications.This cable features a robust design with a shield that is connected to the metal case of the connector, ensuring minimal interference. The end wires of the signal cable are intentionally left unterminated and are thinned to approximately 3 - 4 mm, allowing for customization. Users can easily terminate the ends with standard banana plugs as needed. Furthermore, the cable boasts an M12-8L-S-X, 8-pin male connector, which promotes compatibility and efficiency in signal transmission. The detailed specifications and design considerations articulated make this cable a vital component in ensuring the optimal functionality of the F3B transducers.

Product

48" Stacking Banana Plug Test Leads

146-P

-

Electronic Specialties Inc.

146-P - Electronic Specialties Inc.

These test leads feature stacking banana plug jacks, with extended 48" length. These are great for establishing connections to diagnostic test points, while allowing the connection to be tapped with other instruments...2 way connections. These feature high flexibility wire and standard 4mm size banana jacks. You will receive one red test lead and one black test lead. These test leads are compatible with Electronic Specialties 146 and 147 test lead kits.

Product

Terminal Test Kit (19 PCS)

3605

-

Peaceful Thriving Enterprise Co Ltd

3605 - Peaceful Thriving Enterprise Co Ltd

1. Check high and low voltages (power and ground) on 6, 12 and 24V system.2. 4mm connection for banana plugs.3. LED indicates red for power (high) and green for ground (low).4. High impedance protects sensitive electronic ignition components.5. Connects red lead to power source and black lead to ground source.6. 1.8m long heavy-duty dual leads with battery clips and spring strain relief.7. Facilities the measurement on connectors and components without destroying the insulation or the plug connection.

Product

54 Piece Automotive Test Connector Kit

146

-

Electronic Specialties Inc.

146 - Electronic Specialties Inc.

This comprehensive test kit features a variety of terminal adapter sets which enable connection to most automotive vehicle connectors, both foreign and domestic. Terminal adapters connect via the included 48 inch stacking banana plug test leads. Connection to most DMM’s and scopes is no problem. Kit is designed to provide wide testing coverage and quicken the test process.

Product

Output Signal Cable

COSxx-A

-

SENIS

COSxx-A - SENIS

The Output Signal Cable COSxx-A is specifically designed for use with SENIS H3A Magnetic Transducers, offering superior connectivity and reliability in your applications. This cable features the R605 connector, which is designed to accommodate differential signal output while ensuring a robust shield connection to minimize interference. With a meticulously crafted construction of Alpha Wire, it utilizes a configuration of two wires (20 x 2 x 0.12 mm²) surrounded by an effective shielding layer, making it ideal for precise signal transmission in various environments. In addition to its excellent technical specs, the cable is equipped with banana plugs for easy and secure connections. The VOUT- is designated with a red wire, while VOUT+ is represented by a yellow wire, and the shield is marked with a black wire. The connector's body integrates seamlessly with the cable shield, and the wires at the end are meticulously soldered to maintain performance integrity. This cable is tailored for engineers and technicians who require high-quality, reliable connections for their SENIS H3A transducers, ensuring optimal performance and longevity in critical applications.

Product

Mini Back Probes/Wire Piercers

618

-

Electronic Specialties Inc.

618 - Electronic Specialties Inc.

*Great for backprobing weather pack style connectors used with numerous automotive sensors *Also very handy for piercing and tapping readings on smaller gauge wires - using the included probe adapters *Works with most Test Lead Kits in the field - with standard 4mm banana plug test lead *Set includes four probes - red, black, green, yellow Test probes 21 mm length

Product

Clamp-On / Precision / Split Core Current Transformer

-

Meco Instruments Pvt. Ltd.,

Meco Instruments Pvt. Ltd.,

Transformer Ratio (Arms) : 100A / 1AColours : Red, yellow, blueConnection : Safety Sockets for Banana Plugs ф 4mm Jaw Opening : Cable Dia 15mm max.

Product

Testing Leads Assortment (16PCS)

3605A

-

Peaceful Thriving Enterprise Co Ltd

3605A - Peaceful Thriving Enterprise Co Ltd

1. For use on the 6-24V circuits.2. 4mm connection for banana plugs.3. Facilities the measurement on connectors and components without destroying the insulation or the plug connection.

Product

DMM Test Probe Kit With Multi-Stacking Banana Plug

5325A

-

Pomona Electronics

5325A - Pomona Electronics

DMM test probe kit with multi-stacking banana plug

Product

Output Signal Cable

Co10-SE

-

SENIS

Co10-SE - SENIS

The Output Signal Cable Co10-SE is meticulously designed for use with SENIS 3DACMT magnetic transducers, ensuring reliable connectivity and optimal performance. This cable features a tough construction with a 4mm standard banana plug connector, facilitating secure and efficient signal transmission. The layout of the signal wiring includes color-coded outputs for the X, Y, and Z axes, alongside a dedicated ground connection, which simplifies the installation and troubleshooting process for users.