CD Analyzers
-
Product
Chargers & Analyzers
-
a specialized maintenance device used to charge, discharge, test, and evaluate aircraft batteries (such as Lead-Acid, Nickel-Cadmium, or Lithium-ion). It ensures safety and regulatory compliance by verifying that a battery can hold an emergency electrical load.
-
Product
Liquid Analyzers
-
Teledyne Analytical Instruments
Liquid Analyzers by Teledyne Analytical Instruments
-
Product
PCI Express 5.0 Protocol Exerciser/Analyzer
Summit Z58
Analyzer
The Summit Z58 is a PCIe 5.0 protocol traffic generation test tool used for critical test and verification intended to assist engineers in developing and improving the reliability of their systems. The Summit Z58 can emulate PCI Express 5.0 root complexes or device endpoints, allowing new designs to be tested against corner case issues.
-
Product
Gas Analyzers
-
Mobile, Table Top, Inline, Ambient Air Monitoring and Moisture Measurement gas analysers.
-
Product
Audio Analyzers
-
Audio analyzer provides fast, accurate measurements including frequency, AC or DC level, distortion, SINAD and signal-to-noise ratio. It also includes an audio source providing accurate low distortion signals over wide frequencies and level ranges.
-
Product
PDN Analyzer
-
The PDN Analyzer powered by CST allows you to easily resolve PDN issues as they arise in your board layout process without ever relying on a physical prototype. With digital designs continuing to increase in density and complexity, it's more difficult and critical than ever to fully understand the impact of design decisions on your Power Distribution Network (PDN) voltage and current performance.
-
Product
TOC Analyzer
QuickTOCultra
-
Fast, Accurate, Low-maintenance Monitoring of TOC, COD, TOD or Nitrogen
-
Product
Streamline USB Vector Network Analyzer, 32 GHz
P5006A
Vector Network Analyzer
Compact, faceless, USB vector network analyzer (VNA). Flexible two port VNA which dramatically reduces your size of test. Up to 32 GHz.
-
Product
Energy Analyzer
EP600i
-
The EnergyPro EP600i is portable and easy to use. Perfect for single phase or three phase energy consumption analysis and basic power quality monitoring. It supports standard wiring configurations and comes with a set of 1A - 2500A WideRangeFlexCT ™. The graphics display makes setup very easy and intuitive - you can setup and record data without looking at the manual!
-
Product
Combustion Analyzers
-
The Seitron handheld analysers Chemist 100 and Novo are used worldwide for boiler fume analysis. All of our analysers are designed and manufactured in Italy to guarantee the highest quality and reliability.
-
Product
Protocol Analyzer
-
Zeroplus Technology Corperation
Is a measurement tool or device used to capture and monitor the data over communication channel.
-
Product
Benchtop Analyzer
LabSpec 4 Bench
-
Analytical Spectral Devices, Inc.
Configured specifically for fixed-location analysis with AC power, the LabSpec 4 Bench benchtop analyzer provides all the performance of ASD's LabSpec laboratory spectrometer line in a space-saving and cost-efficient design. The benchtop analyzer features sophisticated near infrared (NIR) spectroscopy at a 10 nm resolution for accurate measurement of a wide variety of materials in real time. Like the portable models, an enhanced spectrometer configuration more than doubles the signal-to-noise performance in the SWIR regions.
-
Product
Logic Analyzer
LAP-321000U-A
-
Zeroplus Technology Corperation
Sample rate (Internal clock): 200MHz asynchronous operation. Sample rate (External clock): 100MHz synchronous operation. Memory Depth (per channel): 1MbitsChannels: 32CH. Upgrade Oscilloscope to measure and decode I2C / UART (RS232C & RS485) / SPI Protocols and mixed signals. Glitch Capture Capability: 5ns. Bandwidth: 75MHz.
-
Product
Datacom Analyzers
-
Wuhan Sunma Technology Co., Ltd.
SunmaFiber provide E1/2M Transmission Analyzer is one multi-functional and full- featured digital transmission system test device, designed for the installation test, engineering check and acceptance, daily maintenance of digital networks, mainly performing channel test, alarm analysis, fault finding and signal analysis. In addition, this instrument further provides various protocol converters with one-way and bi-directional bit error test function. These capabilities make it ideal for field use.
-
Product
Electrosurgery Analyzers
-
Test critical ESU functions with precise power, current, frequency, crest factor and load resistance ranges on a variety of makes and models of electrosurgical unit generators using the Fluke Biomedical Electrosurgical Analyzers.
-
Product
Spectrum Analyzer
H45 Advance
-
The H45 are a milestone in the design of spectrum analyzers.Professional spectrum analyser - - 2,5GHz The latest technology and the latest features in a comprehensive range take will never become obsolete since any meter can be upgraded to the coming technologies .DVB, DVB-T,DVB-C, DVB-S,DVB-S2, LTE simulator
-
Product
Process Analyzers
2035
-
The 2035 Process Analyzer is a versatile wet-chemical analyzer which comes in three basic configurations for potentiometric, photometric, and thermometric determinations. The 2035 Process Analyzer is an integrated solution for 24/7 online monitoring of critical chemical parameters in industrial processes and wastewater streams.
-
Product
Spectrum Analyzers
SK4M Series
-
*Frequency range: 100 Hz to 20/50 GHz*DANL < −165 dBm/Hz*Low Phase Noise −125 dBc/Hz at 1 GHz signal from 100 kHz offset*High Frequency Reference Accuracy ±0.1 ppm*Resolution Bandwidth Range 1 Hz to 10 MHz*Built-in Low-noise Amplifier
-
Product
ESU Analyzers
-
Most ESU generators have multiple output modes with different waveforms, such as Cut, Coag, Bipolar, etc. Some of the waveforms are continuous and some are pulsed. The pulsed mode outputs of the following generators have been analyzed and found to be compatible with the indicated ESU Analyzers. Note that continuous waveforms can be measured by any analyzer, the compatibility list shown below is for pulsed waveform measurement.
-
Product
Data Analyzer
ZENTRA CLOUD
-
Use ZENTRA Cloud to see and analyze your data in near-real time from wherever you are.
-
Product
Thermogravimetric Analyzers
-
An ELTRA thermogravimetric analyzer is the ideal alternative to standard laboratory ovens and muffle furnaces for thermogravimetric analysis. Thanks to a programmable furnace that is connected to an integrated balance, heating and weighing are combined in one instrument. This saves time-consuming manual work and allows for high sample throughput. In addition, a thermogravimetric analyzer can determine typical parameters such as moisture, ash and volatiles in one single analysis run.
-
Product
Scienlab Charging Discovery System (CDS) – High-Power Series
SL1047A
Battery Test Platform
The Scienlab Charging Discovery System – High-Power Series from Keysight enables you to test charging interfaces of electric vehicles (EVs) and EV supply equipment (EVSE) during high-power charging up to 1,500 V DC and ±600 A DC. With the CDS can perform all necessary conformance and interoperability tests according to worldwide charging standards. Our new solution, which features the separate Scienlab Cooling Unit with interchangeable liquid-cooled charging adapters, also enables a high-power upgrade of the SL1040A Scienlab Charging Discovery System - Portable Series.
-
Product
LIBS Analyzer
-
LIBS is a type of optical emission spectroscopy used to measure elemental concentrations in a material.
-
Product
Battery Analyzers
-
JUNXY battery internal resistance & conductance tester is a portable and hand-held battery test and measurement instrument for daily battery maintenance. It offers users a fast and reliable principle to on-line check groups of battery bank’s battery state of health (SOH), battery performance by quickly and precisely testing each cell voltage, internal resistance, conductance, connecting strip resistance and so on.
-
Product
Multichannel Analyzers
-
A family of USB-connected, software controlled Multichannel Analyzers with 4 - input MCA with 32k resolution, > 1 M events / sec on each channel, MCS mode, RTC (option). The MCA-4 offers two multiscaling inputs with a counting rate capability of 300 MHz at dwell times as low as 70 ns.
-
Product
Analyzer Probes
-
The following probes are available for the MA51x0 and MA41x0 series analyzers. These probes are designed for low-voltage and high-speed midbus probing or probing with an interposer. The following JEDEC memory standards are widely used by these probes: DDR5 (JESD79-5), DDR4 (JESD79-4), DDR3 (JESD79-3), LPDDR5 & LPDDR5X (JESD209-5), LPDDR4 & LPDDR4X (JESD209-4), and LPDDR3 (JESD209-3).
-
Product
PXI Vector Component Analyzer, 100 kHz to 26.5 GHz
M9815AS
Vector Component Analyzer
The PXI vector component analyzer (VCA) enables complex multiport device characterization with continuous wave (CW) and modulated signal measurements.
-
Product
GFID Analyzer
-
Gasmet Flame Ionization Detector (GFID) is designed for continuous total hydrocarbon (THC) measurements. GFID analyzer offers a TÜV certified solution (QAL1) for measuring pollutants from hot, wet and corrosive gas streams.
-
Product
Defibrillator Analyzers
-
Ensure proper operation and ultimate performance of critical life-support cardiac-resuscitation equipment with our compliant, rugged, portable precision test instruments.
-
Product
Gas Analyzers
-
Independent Handheld 5 Gas Analyzer or use with MODIS™ Link, VERDICT® and VERUS® Bluetooth® link. Fully Portable 5 Gas Analyzer, go anywhere, use anywhere 110 V AC and 12 V powered Internal rechargeable battery, up to one hour of use Ideal for road testing and mobile use Measures exhaust emissions for CO, CO2, HC, O2, NOx and AFR/Lambda Provides an instant assessment of an engine vehicle exhaust and catalytic converter MODIS, VERDICT® and VERUS® Link for enhanced real-time viewing Setup required with included software on USB stick Gather all the evidence required for effective and accurate vehicle diagnostics on one screen in real time View, graph, save and recall data Monitor and reduce vehicle emissions, improve driveability and fuel efficiency There are 255 memory locations in the analyzer to track and print data for the same or many different vehicles Compatible with gasoline, CNG, propane and diesel fuel types Annual calibration and sensor replacement performed at Crystal Lake Northern Repiar enter Meets required industry standard
