Streak Cameras
measure intensity variations in multiple optical events over time, ultra fast.
See Also: Cameras, Line Scan Cameras
-
Product
Dynamic Calibration for ROSS Streak Cameras
DynaCal
-
The DynaCal Optical Calibration Module (OCM) is designed exclusively for the Sydor ROSS Streak Camera to ensure accuracy, both over time and in situ, so you can be confident that the data from your shot is certified to be correlated to the calibration of your camera. The beauty of in situ calibration is that the cost of removing and resetting the camera is avoided—and so is the risk of the replacement of the camera and shifting or disturbing the sensitive nature of streak camera results. Only in situ calibration will reveal the real world effects of EMR, gravity, electronic noise and more when they distort your camera results.
-
Product
(Visible and IR) Affordable Picosecond Streak Cameras
AXIS-SV
-
* 3 ps resolution * Spatial resolution of 50 m at the center of the slit * Time window 300ps to 500ns * no trace curvature
-
Product
Streak Camera Systems
-
Rotating Mirror framing cameras offer very high resolution and dynamic range.
-
Product
Streak Camera
OptoScope S3C-1
-
The S3C-1 is a streak camera based on a semiconductor sensor. Like tube-based streak cameras, the S3C-1 captures changes in light along a line and records the change over time. To record the intensity values, they are sampled and stored with up to 2 GSamples/sec. The line is 65 µm wide and consists of 200 elements along its 5 mm length. Each element consists of a sensitive photodiode with a downstream amplifier.A new and special camera feature is continuous recording. This makes it possible to take recordings of events for which precise information about the time of their occurrence only becomes available after they have taken place. This "post-triggering" simplifies or allows certain applications.
-
Product
Streak Cameras
-
Streak camera technology was developed for measuring ultra-fast optical phenomena. OptoScope streak cameras provide temporal resolution down to the Picosecond regime. Additionally, OptoScope systems have high sensitivity allowing single photon detection. Streak cameras are the only instruments that can capture the behavior over time of multiple optical signals. Combined with a spectrometer this allows their application in the field of time resolved spectroscopy.
-
Product
Streak Cameras
-
We collaborated with them to develop the technology the scientists needed and made it commercially available—and now the Sydor ROSS Streak Camera is integral to many of the diagnostic systems found in leading, world-class laboratories. The Sydor ROSS Streak Camera is the only one of its kind that features dynamic calibration—with our proprietary, DynaCal OCM (Optical Calibration Module), available exclusively from Sydor Technologies.
-
Product
(X-ray and XUV) Streak Cameras
AXIS-PX
-
We build streak camera systems that can achieve time resolution on the femtosecond time scale while conserving and ultra-fine spatial resolution on a very long slit length.
-
Product
Streak Camera
OptoScope SC-10 systems
-
SC-10 systems are based on the SC-10 main unit and cover a very large range of applications thanks to their flexibility. With a time resolution of 2 ps, a very high temporal resolution streak system is available. The main unit itself uses a fused silica input window, maintaining sensitivity well into the UV range. Deflection units for triggered and synchroscan operation are available. The configuration with a second deflection unit for extension with an orthogonal time axis is also possible. SC-10 systems are well suited for applications in the field of time-resolved spectroscopy and offer a wide range of options for optical coupling.
-
Product
(Visible and IR) Streak Cameras
AXIS-PV
-
Our ultrafast cameras are well-suited for time-resolved spectroscopy of ultrafast events in the X-rays as well as in visible light.
-
Product
X-Ray Beam Monitors
-
When standard products just aren’t good enough—or the measurement technology does not yet exist—Sydor Technologies develops technology to enable these complex imaging measurements. Just as we’ve developed next-generation streak cameras and x-ray detectors to meet novel, emerging requirements in national laboratories, we’re doing the same with x-ray beam monitors.
-
Product
Streak Tubes
-
Streak tubes are the most important modules of streak cameras used for the study of ultra fast optical phenomena. The latter cameras are tools of critical importance in many areas of science and technology like studies of plasma/electric discharge/ combustion/laser ablation/ condensed matter phenomenon, in optical communications, electron beam acceleration technology, photochemistry, medicine, biology etc. Streak cameras have made possible a series of important scientific discoveries in earlier mentioned areas of science and technology. Precision information about parameters of streak tubes is needed both by manufacturer of such tubes in improve tube design and by users of these tubes to correct data generated by the tubes and make possible more accurate interpretation of output images.
-
Product
Streak Camera
OptoScope SC-20 systems
-
The SC-20 streak camera system is characterized by its large detection area of 35 mm x 4 mm and a large usable screen diagonal of 40 mm. Signals are mapped onto the fiber optic input window and measured without the need for optical reduction. In the simplest case, the entrance optics consists of a slit mask that lies directly on the entrance window. In addition, a flexible extension with a shutter, a lens mount or an adjustable slot with coupling optics is possible. The time resolution in the sub-nanosecond range qualifies the camera for many applications in detonics and plasma physics.
-
Product
High Throughput Optical Streak Camera
AXIS-NV
-
AXIS-NV is used for time-resolved spectroscopy of subnanosecond eventsin the visible and IR range.
-
Product
Industrial AI Camera
CAM-2210-U
-
5MP SONY IMX335 rolling shutter USB3 camera. 5M (2560x1920@30fps) GMSL2 camera. SONY IMX335 STARVIS CMOS sensor.
-
Product
Industrial AI Camera
CAM-2110-G
-
2M SONY IMX290 rolling shutter GMSL2 camera. 2M (1920x1080@60fps) GMSL2 camera. SONY IMX290 CMOS sensor.
-
Product
Visible Security Cameras - Dome Cameras
-
Teledyne FLIR Visible Security Cameras - Dome Cameras
-
Product
Microscope Cameras
-
Leica microscope cameras are remarkable for their fast live image speeds, short reaction times, high pixel resolution, and clear contrast. They can be installed on many of the Leica microscopes and macroscopes.
-
Product
THz Cameras
-
Passive THz imagers are capable to see thru thin obstacles and are a very interesting solutions for short distance surveillance applications like airport screening, prison screening etc. Ability to create images of targets hidden by humans under clothes is particularly interesting. This ability can be evaluated when a set of parameters of these imagers is measured and known.
-
Product
Hyperspectral Camera
-
TruTag Technologies offers a low-cost, autonomous hyperspectral imaging system that expands the envelope of applications. TruTag’s HSI system provides the capability to convert or add existing product lines with minimal development effort. TruTag’s self-contained HSI architecture and system can be adapted to a consumer’s technical and commercial needs; and can be produced on our mass-production line opening potential applications for fields as diverse as biomedical imaging, smart agriculture and machine vision.
-
Product
Industrial Cameras
-
High-performance CMOS cameras with GigE Vision, USB3 Vision and Camera Link.
-
Product
Healthcare Cameras
-
Integrate into imaging systems for clinical diagnostics in hospitals and laboratories. Gentific™ cameras optimize diagnostic performance, support medical imaging equipment standards and improve customer competitiveness.
-
Product
Industrial Cameras
-
With a selection of over 100 industrial cameras, The Imaging Source maintains one of the broadest portfolios in the machine vision market.
-
Product
Acoustic Camera
SONASCREEN®
-
The handheld acoustic camera SONASCREEN generates acoustic images from both the audible and ultrasound frequency range. The device locates sound sources in real time and displays the results immediately on the screen. Furthermore, the camera provides audible feedback through industrial headphones. We make ultrasound audible and visible.
-
Product
CMOS Camera
MIchrome 6
-
Fuzhou Tucsen Photonics Co.,Ltd
MIchrome 6 is equipped with Tucsens new computational imaging software, Mosaic 2.0, which provides a "real-time image stitching" function. It can generate large-sized mosaic images in a few seconds while moving the stage, which is light, smooth and worry-free! MIchrome 6 also provides real-time depth of field fusion. Turning the focus ring to capture different depth of field points while generating clear depth of field images, fast, accurate and efficient.
-
-
Product
Infrared Cameras
-
The stationary infrared cameras of the VarioCAM ® HD head, VarioCAM ® hr head, VarioTHERM ® InSb and PIR uc series with their solid light metal housings are suitable for fixed use under harsh process conditions.
-
Product
Infrared Cameras
-
Nowadays, temperature measurement is closely linked to this new type of equipment, capable of fully mapping any kind of surface. HT offers a wide range of Infrared Cameras for any kind of requirement and use.
-
Product
Cameras
LDX 90 Series
-
The LDX 90 Series from Grass Valley delivers high-quality broadcast camera technology, designed to meet the rigorous demands of live production. With exceptional image quality, operational flexibility, and cutting-edge features, these cameras empower broadcasters to capture every moment with precision, creativity, and confidence. Designed for high-performance broadcasting, the LDX 90 Series offers versatile solutions with advanced imaging technology and adaptable operating modes. Built for reliability in any production environment, these cameras provide cost-effective tools that help broadcasters stay competitive in an evolving industry.
-
Product
Inspection Cameras
-
The inspection camera opens a new view into the insides of machines and systems; whether an endoscope, thermal imaging camera or infrared thermometer - an inspection camera is the ideal instrument for monitoring and maintenance.Due to the flexible control of the endoscope or the visual display of potential damage areas in machines or systems, weaknesses and points of failure can be detected and therefore be prevented. The inspection camera make this possible without the need for complex disassembly.The inspection camera is used by electricians, safety experts, expert witnesses, mechatronics, and mechanics. The inspection camera is also used for apprenticeships and in-service training. An inspection camera can be applied internally as well as at school or at universities for demonstration purposes. With their help, inspections in the industrial sector can be organized considerably faster, more targeted and more cost-efficient. An inspection camera is an important companion in the course of everyday work.
-
Product
Camera Finder
-
Discover our extensive portfolio of industrial and board-level cameras. Use our Camera Finder to narrow your field of view!
